Author Topic: N-17 Triplane 1/48 (Read 19364 times)

Alexis · « **Reply #75 on:** December 08, 2020, 01:10:33 PM »

Up-date starts on the end on last page

RAGIII · « **Reply #76 on:** December 08, 2020, 01:20:06 PM »

That interior is absolutely amazing...and now it is gone

Lovely work T!
RAGIII

Alexis · « **Reply #77 on:** December 08, 2020, 11:02:38 PM »

Thanks Rick

Even though that nothing will be seen . I'm glad that I did add the detail , really enjoyed myself and found it to be relaxing .

Terri

Alexis · « **Reply #78 on:** December 09, 2020, 09:51:50 AM »

Seems have been address which turned out to be quick work . This will get polished out once the the decking is filled . The lacing will get lost in the process but I do have PE to use for replacing that detail .

Terri

Alexis · « **Reply #79 on:** December 09, 2020, 09:52:14 AM »

RAGIII · « **Reply #80 on:** December 09, 2020, 09:57:19 AM »

Excellent Terri. I am looking forward to the next two wings

RAGIII

Bughunter · « **Reply #81 on:** December 09, 2020, 11:19:41 PM »

Quote from: Terri on December 08, 2020, 11:02:38 PM

Even though that nothing will be seen . I'm glad that I did add the detail ,

... and we all know it is there!

Quote from: Terri on December 08, 2020, 11:02:38 PM

really enjoyed myself and found it to be relaxing.

That is the most underestimated and the most important part of the game!

Cheers,
Frank

Alexis · « **Reply #82 on:** December 10, 2020, 01:02:32 AM »

Thanks Rick and Frank

I filled the front strut mounting locations last night with bits of plastic card . To really pack the hole once the piece is in place I go back over it a few times more with Tamiya extra thin , using the back of the knife handle I press the plastic down until it totally fills it in . Sand this will give a pretty finish then using putty .

Now I can start with more sanding

Terri

lone modeller · « **Reply #83 on:** December 10, 2020, 04:35:27 AM »

Your are working fast on this one Terri - I can barely keep up with you. There is no loss of quality of finish though.

Stephen.

Monty · « **Reply #84 on:** December 10, 2020, 04:40:10 AM »

There is some stunning modelling happening here, Terri! Great progress.... ATB, Marc.

Alexis · « **Reply #85 on:** December 10, 2020, 11:53:02 AM »

Thank you Stephen and Marc

Bit more progress done today . The holes are filled on the top decking and sanded smooth . The stitching will be added once the engine and cowl issue is resolved . The engine needs a fair bit of the cylinders removed , but I will thin down the inside on the cowl first . The pencil marks on the fire wall is for the oil tank placement which i still need to cut out of card and sand to shape .This is the only detail I will add to this area , nothing else will be seen . While I was at it I also made up valve stems for the wheels .

Terri

Alexis · « **Reply #86 on:** December 10, 2020, 11:53:27 AM »

Alexis · « **Reply #87 on:** December 10, 2020, 11:53:51 AM »

Alexis · « **Reply #88 on:** December 10, 2020, 11:54:17 AM »

Alexis · « **Reply #89 on:** December 11, 2020, 01:37:35 PM »

Okay , I came up with a very cunning plan on how to make the engine fit inside the cowl . I spent a few hours thinning the inside down to the point that it is almost paper thin ...okay two sheets thin

But what about the engine !!! Out came the saw and i cut off the flange and removed part of the lower cylinder , a fair bit was removed . and glued back on top of the flange and it now fit's inside the cowl . I managed to break off three off the rocker arms so those will face up wards in the cowl . Fuselage is polished and the rest of the details have been started . For the lacing I used taiya cut cut 2mm in with and Eduards PE for the rest and wipe up an oil tank .

Terri