Thanks for commenting AROTH, Juan, Giuseppe, Przemol, and Rick.
A few comments:
The decal rib tapes on the bottom of the wings got wrinkled when spraying Tamiya white primer on them, so, after re-applying them, I put 3 coats of Future floor polish on them before priming.
The ailerons have been attached to the upper wings with small (0.015") wire. The actual aircraft has flat hinges on the bottom surface of the wing, like many RC aircraft of today. This creates a large gap on the top wing surface so the aileron can move upward. I will put a simulated hinge on the bottom of the wing for appearances sake.
I have fixed the gaps around the wing support / cabane and the fuse top. It looks horrible in the picture.
The guns on the actual plane sit on top of the fuse, not halfway in it like most WW1 aircraft, making it easier to fit them.
I take pictures at random points along the build process, so the pictures may show crude work, but I fix a lot of things before I am finish with it.
Again, thanks for following along and commenting.