« previous next »
Pages: 1 ... 5 6 [7] 8 9 ... 28

Author Topic: Dual Build: Roden 1/32nd Albatros DIII (OAW): Jasta 10, WNW ALbatrosDV: Jasta11  (Read 121845 times)

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 19688
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #90 on: September 20, 2017, 12:40:27 AM »
Juan, David, Stephen, and Steve,
Thank you so much for your very positive comments! In the end no matter what smoke and Mirrors detail I have added I really like the closed cowl and sleek look of the Albatros. So.... it will be covered  :o
RAGIII
« Last Edit: September 20, 2017, 02:07:11 AM by RAGIII »
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 19688
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #91 on: November 04, 2017, 08:47:31 AM »
Quote from: RAGIII on September 20, 2017, 12:40:27 AM
Juan, David, Stephen, and Steve,
Thank you so much for your very positive comments! In the end no matter what smoke and Mirrors detail I have added I really like the closed cowl and sleek look of the Albatros. So.... it will be covered  :o
RAGIII

So here are two tales. Believe the one you want to  8)
1. I decided to open the cowlings because several of my peers here commented that it was a shame to cover up the detail on the engine and bay.  8)
2. I attached the cowl /cockpit covering as planned and even after the spreader was added and a butt load of sanding I did not get a fit I was satisfied with so I removed the metal portion of the engine cover and will leave off the panels  >:(









RAGIII
« Last Edit: April 14, 2018, 05:48:49 AM by RAGIII »
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline GAJouette

  • Hero Member
  • *****
  • Posts: 3579
  • " Beware of the Spanish Inquisition"
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #92 on: November 04, 2017, 02:54:45 PM »
 Rick,
Outstanding works my old friend. Absolutely looking forward to more. Mind if I borrow a few ideas from you for my own D.III collecting dust in the stash?
Highest Regards,
Gregory Jouette
Logged
" What Me Worry"

Offline boggie

  • Sr. Member
  • ****
  • Posts: 420
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #93 on: November 04, 2017, 02:56:16 PM »
quote by RAGIII

So here are two tales. Believe the one you want to  8)
1. I decided to open the cowlings because several of my peers here commented that it was a shame to cover up the detail on the engine and bay.  8)
2. I attached the cowl /cockpit covering as planned and even after the spreader was added and a butt load of sanding I did not get a fit I was satisfied with so I removed the metal portion of the engine cover and will leave off the panels  >:(
-------------------------------------------------------------------------------------------------------------------------------------------

Well, it's always good to have options!  ;D

Either way we viewers win 'cause we get to see your beaut looking engine.

Great progress Rick. 

More please.  :)




Logged

Offline Juan

  • Hero Member
  • *****
  • Posts: 2474
  • All gave some, some gave all.
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #94 on: November 05, 2017, 01:15:45 AM »
Quote from: boggie on November 04, 2017, 02:56:16 PM
quote by RAGIII

Well, it's always good to have options!  ;D

Either way we viewers win 'cause we get to see your beaut looking engine.

Great progress Rick. 

More please.  :)

Could not agree more, whatever the reason, we win and see your mini masterpiece engine.
Logged

Offline lone modeller

  • Hero Member
  • *****
  • Posts: 5503
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #95 on: November 05, 2017, 04:55:42 AM »
Quote from: Juan on November 05, 2017, 01:15:45 AM
Quote from: boggie on November 04, 2017, 02:56:16 PM
quote by RAGIII

Well, it's always good to have options!  ;D

Either way we viewers win 'cause we get to see your beaut looking engine.

Great progress Rick. 

More please.  :)

Could not agree more, whatever the reason, we win and see your mini masterpiece engine.

Completely agree with the others - we all win, so there is absolutely nothing to complain about!

Stephen.
Logged

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 19688
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #96 on: November 06, 2017, 03:30:53 AM »
Quote from: GAJouette on November 04, 2017, 02:54:45 PM
Rick,
Outstanding works my old friend. Absolutely looking forward to more. Mind if I borrow a few ideas from you for my own D.III collecting dust in the stash?
Highest Regards,
Gregory Jouette

Thanks for the comment Gregory. You are welcome to borrow any of my Smoke and Mirrors ideas you want  ;D
RAGIII
Quote from: boggie on November 04, 2017, 02:56:16 PM
quote by RAGIII

So here are two tales. Believe the one you want to  8)
1. I decided to open the cowlings because several of my peers here commented that it was a shame to cover up the detail on the engine and bay.  8)
2. I attached the cowl /cockpit covering as planned and even after the spreader was added and a butt load of sanding I did not get a fit I was satisfied with so I removed the metal portion of the engine cover and will leave off the panels  >:(
-------------------------------------------------------------------------------------------------------------------------------------------

Well, it's always good to have options!  ;D

Either way we viewers win 'cause we get to see your beaut looking engine.

Great progress Rick. 

More please.  :)






Thanks for the support and generous comment!
RAGIII


Quote from: Juan on November 05, 2017, 01:15:45 AM
Quote from: boggie on November 04, 2017, 02:56:16 PM
quote by RAGIII

Well, it's always good to have options!  ;D

Either way we viewers win 'cause we get to see your beaut looking engine.

Great progress Rick. 

More please.  :)

Could not agree more, whatever the reason, we win and see your mini masterpiece engine.

Thanks Juan, your continued confidence in my build and support are always appreciated.
RAGIII

Quote from: lone modeller on November 05, 2017, 04:55:42 AM
Quote from: Juan on November 05, 2017, 01:15:45 AM
Quote from: boggie on November 04, 2017, 02:56:16 PM
quote by RAGIII

Well, it's always good to have options!  ;D

Either way we viewers win 'cause we get to see your beaut looking engine.

Great progress Rick. 

More please.  :)

Could not agree more, whatever the reason, we win and see your mini masterpiece engine.

Completely agree with the others - we all win, so there is absolutely nothing to complain about!

Stephen.

Thanks Stephen! Greatly appreciate the comment!
RAGIII

PS: Leaving off the panels means I have to go back and do some tricky painting to a few things that would not have been seen with the covers on. Lesson Learned don't skip anything as you never know what will happen  ::)
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline dr 1 ace

  • Hero Member
  • *****
  • Posts: 2443
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #97 on: November 06, 2017, 07:12:28 AM »
Progressing well, , good choice to leave the cowls off. Await next batch of pics

Ed
Logged
Life is short, enjoy it, nobody gets out alive.

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 19688
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #98 on: November 07, 2017, 12:33:21 AM »
Quote from: dr 1 ace on November 06, 2017, 07:12:28 AM
Progressing well, , good choice to leave the cowls off. Await next batch of pics

Ed

Thanks Amigo, always appreciate your comments!
RAGIII
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline jeroen_R90S

  • Hero Member
  • *****
  • Posts: 1060
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #99 on: November 12, 2017, 06:36:39 AM »
Nice to see this update, and thanks for deciding what to ask for "Sinterklaas" this year...  ;D ;D The Roden D.III (not this OAW version) with some Eduard PE! :)

Look forward to the next installment!
Logged

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 19688
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #100 on: November 12, 2017, 08:12:35 AM »
Quote from: jeroen_R90S on November 12, 2017, 06:36:39 AM
Nice to see this update, and thanks for deciding what to ask for "Sinterklaas" this year...  ;D ;D The Roden D.III (not this OAW version) with some Eduard PE! :)

Look forward to the next installment!

Thanks for the comment. I am sure you will enjoy the DIII, a good basic kit!
RAGIII
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline jeroen_R90S

  • Hero Member
  • *****
  • Posts: 1060
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #101 on: November 13, 2017, 06:46:21 AM »
I hope, too! There are so many cool schemes to choose from, and the Eduard set allows an off-center radiator, making even more schemes possible...! Got a DVII to do, first... ;)
Logged

Offline Manni

  • Hero Member
  • *****
  • Posts: 1768
    • Der Militärmodellbauer
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #102 on: November 13, 2017, 06:08:15 PM »
Rick, I totally missed this build. Great so far, nothing else to think of.
Top Work.
Manni
Logged
"Ich hab' da mal was vorbereitet.": Jean Pütz
"Warum noch mehr Bausätze?!?": meine Frau

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 19688
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #103 on: November 14, 2017, 12:36:21 AM »
Quote from: Manni on November 13, 2017, 06:08:15 PM
Rick, I totally missed this build. Great so far, nothing else to think of.
Top Work.
Manni

Thanks Manni! I am glad you found the build and took the time to comment! Greatly appreciated.
RAGIII
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 19688
Re: Roden 1/32nd scale Albatros DIII (OAW): Jasta 10
« Reply #104 on: December 10, 2017, 06:35:45 AM »
Back on this one after finishing the Fokker EV. I have attached the lower wing, and revised rudder,  and drilled the rigging holes. Of course this one may lose out to the WNW Dolphin in the near future  ::)






I have also begun to put the base coat for the wood grain around the engine and cockpit area.

RAGIII
« Last Edit: April 14, 2018, 05:49:20 AM by RAGIII »
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler
Pages: 1 ... 5 6 [7] 8 9 ... 28
« previous next »