« previous next »
Pages: 1 ... 10 11 [12] 13 14 ... 22

Author Topic: Eduards SSW D.III  (Read 33838 times)

Offline Alexis

  • Hero Member
  • *****
  • Posts: 8029
  • Love the self
Re: Eduards SSW D.III
« Reply #165 on: August 19, 2014, 12:38:22 PM »
And I will sneak these in ......

Side markings are in place and the udder side of the wings are covered . I'm very impressed with Aviattic's Lozenge ! Don't think I have ever used a decal which was so forgiving ...man you can pull on these pretty good and no tears !

One thing though and it could be our Canadian water ( never know what's in it ) but the decals would not slide off the backing even when following the instructions . I'm I missing something hear ?





Logged
Hurra ! , Ich Leben Noch
Body and life is a vessel we use to travel the planet . Femininity is the gift , The miracle comes from what we do with it .

Offline Alexis

  • Hero Member
  • *****
  • Posts: 8029
  • Love the self
Re: Eduards SSW D.III
« Reply #166 on: August 19, 2014, 12:39:28 PM »
 :)

I didn't use a flash hoping that the effect of the per-shading would show better ...
Logged
Hurra ! , Ich Leben Noch
Body and life is a vessel we use to travel the planet . Femininity is the gift , The miracle comes from what we do with it .

Offline Alexis

  • Hero Member
  • *****
  • Posts: 8029
  • Love the self
Re: Eduards SSW D.III
« Reply #167 on: August 19, 2014, 12:40:18 PM »
 :)






Terri
Logged
Hurra ! , Ich Leben Noch
Body and life is a vessel we use to travel the planet . Femininity is the gift , The miracle comes from what we do with it .

Offline lcarroll

  • Administrator
  • Hero Member
  • ******
  • Posts: 8656
Re: Eduards SSW D.III
« Reply #168 on: August 19, 2014, 11:03:21 PM »
Quote from: Terri on August 19, 2014, 12:38:22 PM
And I will sneak these in ......

Side markings are in place and the udder side of the wings are covered . I'm very impressed with Aviattic's Lozenge ! Don't think I have ever used a decal which was so forgiving ...man you can pull on these pretty good and no tears !

One thing though and it could be our Canadian water ( never know what's in it ) but the decals would not slide off the backing even when following the instructions . I'm I missing something hear ?

Terri,
    I use water from our Reverse Osmosis Filter (live in the wilderness) so it's pretty close to 100% pure, like distilled in content. I did find that the Aviattic's took a longer time to loosen up as well. Maybe the Edmonton Water (which I've always wondered about!) has something to make it even worse?)
Looking very nice, you are almost "there"!
Cheers,
Lance
Logged

Offline Chris Johnson

  • Hero Member
  • *****
  • Posts: 1959
Re: Eduards SSW D.III
« Reply #169 on: August 20, 2014, 12:38:59 AM »
Quote from: Terri on August 19, 2014, 12:38:22 PM
One thing though and it could be our Canadian water ( never know what's in it ) but the decals would not slide off the backing even when following the instructions . I'm I missing something hear ?

Mine slid quite quickly off the backing paper Terri. I use lukewarm 'town' water from good old Lake Ontario.

Quote from: lcarroll on August 19, 2014, 11:03:21 PM
I use water from our Reverse Osmosis Filter (live in the wilderness) so it's pretty close to 100% pure, like distilled in content.

I was always under the impression from reading the Toronto newspapers that anything west of there is the wilderness.  ;D

Cheers,

Chris
Logged
You can have it good; You can have it fast; you can have it cheap. Pick any two, but all three are impossible.

Offline lcarroll

  • Administrator
  • Hero Member
  • ******
  • Posts: 8656
Re: Eduards SSW D.III
« Reply #170 on: August 20, 2014, 01:32:30 AM »
Quote from: Chris Johnson on August 20, 2014, 12:38:59 AM
Quote from: Terri on August 19, 2014, 12:38:22 PM
One thing though and it could be our Canadian water ( never know what's in it ) but the decals would not slide off the backing even when following the instructions . I'm I missing something hear ?

Mine slid quite quickly off the backing paper Terri. I use lukewarm 'town' water from good old Lake Ontario.

Quote from: lcarroll on August 19, 2014, 11:03:21 PM
I use water from our Reverse Osmosis Filter (live in the wilderness) so it's pretty close to 100% pure, like distilled in content.

I was always under the impression from reading the Toronto newspapers that anything west of there is the wilderness.  ;D

Cheers,

Chris

   I sometimes get the impression that, in the minds of the residents, anything outside of the "GTA" falls into the wild frontier category!
Cheers,
Lance
Logged

Offline radio

  • Hero Member
  • *****
  • Posts: 3952
Re: Eduards SSW D.III
« Reply #171 on: August 20, 2014, 03:07:28 AM »
Exellent Terri, exellent.
Nartin
Logged

Offline Alexis

  • Hero Member
  • *****
  • Posts: 8029
  • Love the self
Re: Eduards SSW D.III
« Reply #172 on: August 20, 2014, 12:48:45 PM »
Hi Lance and Chris , It has to be Edmonton's water ( tap water ) and even after two minutes still won't slide off the back . But I did find a way around this which seems to work well . I lift one of the edges and peel it off the backing . Different type of film then what I'm used to using . It's almost like a vinyl , very elastically . Either way I'm really impressed with these decals . With pershading one could have endless possibilities for effects .


Not as much as I would have like to have done this evening , but I'm super tired and my eye's are sore . Top lozenge pplied to the upper surface of the lower wings . I'm very pleased with how the pre-shading effect turned out .


Thanks Martin , always glad on having you drop by with your support ! ;D


It is really bothering me that I forgot to add the shell ejection tube in the pit ...... :(



Terri


Logged
Hurra ! , Ich Leben Noch
Body and life is a vessel we use to travel the planet . Femininity is the gift , The miracle comes from what we do with it .

Offline Nigel Jackson

  • Hero Member
  • *****
  • Posts: 2608
Re: Eduards SSW D.III
« Reply #173 on: August 20, 2014, 04:06:32 PM »
It's coming along beautifully Terri, but do give those tired, sore eyes some occasional rest.

Best wishes
Nigel
Logged

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 19688
Re: Eduards SSW D.III
« Reply #174 on: August 20, 2014, 09:35:46 PM »
The Lozenge is coming along nicely in spite of your difficulties. My North Carolina Well water seems to work fine on the Aviattic decals as I have had no issues removing/sliding them off the backing. (With the exception of some pre production interior Lozenge that had been sent to me for trial. This was on paper that Richard and Harry chose to replace in the production decals!)
RAGIII
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline rhallinger

  • Hero Member
  • *****
  • Posts: 1976
Re: Eduards SSW D.III
« Reply #175 on: August 20, 2014, 09:44:43 PM »
She's shaping up very nicely Terri!  I really like what you've achieved with the Aviattic loznge decals. :D

Looking forward to assembly and final completion. 

Regards,

Bob
Logged

Offline Vickers

  • Hero Member
  • *****
  • Posts: 600
Re: Eduards SSW D.III
« Reply #176 on: August 21, 2014, 03:45:46 AM »
Looking really good, Terri!  That red really pops in combination with the lozenge fabric. Nice work all around!
Logged
Bruno: "How many rules are there?"

Willi: "I don't know... none of zem have ever been written down."

Offline coyotemagic

  • Hero Member
  • *****
  • Posts: 7710
  • "Here's to not buggering it up." -Winston Chuchill
    • My Models
Re: Eduards SSW D.III
« Reply #177 on: August 21, 2014, 05:08:41 AM »
Outstanding work on the lozenge, T!
Cheers,
Bud
Logged
"All men dream: but not equally. Those who dream in the dark recesses of the night awake in the day to find all was vanity. But the dreamers of day are dangerous men, for they may act their dreams with open eyes, and make it possible." -T. E. Lawrence

Offline BigBlue

  • Hero Member
  • *****
  • Posts: 640
Re: Eduards SSW D.III
« Reply #178 on: August 21, 2014, 07:28:41 AM »
Looks great, Terri.  The lozenge came out quite nicely.

Chris
Logged

Offline lcarroll

  • Administrator
  • Hero Member
  • ******
  • Posts: 8656
Re: Eduards SSW D.III
« Reply #179 on: August 21, 2014, 09:37:35 AM »
That's looking really sharp. Terri. I Can't believe your comment on the Aviattic"s performance with Edmonton's tap water. I've always thought it pretty bad however the difference makes me really wonder! Having said all of that your Lozenge looks terrific now that you've got it on and the scheme is spectacular. I'd love to do this bird in 1:32 however It's quite an undertaking from what I've seen.
Cheers,
Lance
Logged
Pages: 1 ... 10 11 [12] 13 14 ... 22
« previous next »