Author Topic: Toms Model Works Pfalz D.VII/III (Read 45093 times)

Bughunter · « **Reply #105 on:** December 22, 2020, 12:47:16 AM »

Quote from: Terri on December 17, 2020, 11:15:07 AM

Frank , do you think he would do one for the nieuport

Surely, if you ask him nicely.

Cheers,
Frank

kensar · « **Reply #106 on:** December 22, 2020, 11:37:33 PM »

Hey guys, I'm standing right here.

I have contacted T about this topic. I think the Noop needs one.

Alexis · « **Reply #107 on:** December 23, 2020, 10:51:08 PM »

Thanks Rick , not much more body work to do and I can get the PE parts fixed in place . Will be starting the struts soon as well . More to come in the next weeks

Thanks Ken

Terri

Alexis · « **Reply #108 on:** December 25, 2020, 08:35:40 AM »

Setting a side the other bits for the time being I focused on adding the smaller details before I get my nails down . ( I'm pampering myself ) Smaller detail can be hard to work with . I added the induction pipes using those items form junked Dragon Fokker Dr.1 builds . Lead wires are added as well with the pushrods still remaining and additional detail painting .

Terri

Radarman · « **Reply #109 on:** December 25, 2020, 10:20:35 AM »

Frohe Weihnachten! Terri,
Little by little this will come together as another of your unique builds.
Kevin

Alexis · « **Reply #110 on:** December 26, 2020, 04:05:25 AM »

Danke Kevin ,

Frohe Weilnachten und Gott schutze dich !

Terri

Alexis · « **Reply #111 on:** December 27, 2020, 09:28:01 AM »

Push rods are now in place . Went crossed eyed a few times but the detailing is done and not to shabby considering on what I had to work with and it still fits inside the cowl so I will tag this one as positive ! Have a bit of detailing painting left . But for now Will focus on finishing off the fuselage details including the cowl and making the struts .

Terri

kensar · « **Reply #112 on:** December 30, 2020, 12:39:57 AM »

A wash on the crankcase will really make that pop.

Alexis · « **Reply #113 on:** December 30, 2020, 11:49:55 AM »

Hello Ken ,

A wash did add life with the rest of the detailing painting completed . All this was sealed with semi clear .

Alexis

kensar · « **Reply #114 on:** December 31, 2020, 10:48:18 PM »

Alexis · « **Reply #115 on:** January 04, 2021, 07:37:56 AM »

Thanks Ken

Bit more progress moving forward with the Struts completed , start on the axle flairing and the legs cut . The engine frame work should poke through slots in the cowl . I don't have the right tool to cut these in and the cowl will still need hours of thinning it down which I'm not doing . So to represent this detail I heat stretched some half round rod to the size needed .

Alexis

Alexis · « **Reply #116 on:** January 04, 2021, 07:38:24 AM »

Alexis · « **Reply #117 on:** January 04, 2021, 07:38:51 AM »

Monty · « **Reply #118 on:** January 05, 2021, 05:06:36 AM »

What a nice looking engine and cowling, there, Alexis! Great progress and looking good! Regards, Marc.

Alexis · « **Reply #119 on:** January 05, 2021, 11:06:37 AM »

Thanks Marc

Alexis