Author Topic: Encore 1/32nd SE5a 56 Squadron: 4891 JTB McCudden (Read 48192 times)

rhallinger · « **Reply #45 on:** March 06, 2015, 09:31:26 PM »

Quote from: IFF1418 on March 06, 2015, 05:35:11 PM

Hello Rick,

The interior looks gorgeous my friend. The woodpainting is breathtaking. This is a wonderful build you are on!

Kind regards
Patrick

+1. Looking very fine Rick!

Regards,

Bob

NinetythirdLiberator · « **Reply #46 on:** March 07, 2015, 01:49:09 AM »

Nice work, Rick...great wood treatment. I've always thought that darn Se-5 seat looks so uncomfortable!

This is fun to watch...Dan

RAGIII · « **Reply #47 on:** March 07, 2015, 05:27:06 PM »

Quote from: IFF1418 on March 06, 2015, 05:35:11 PM

Hello Rick,

The interior looks gorgeous my friend. The woodpainting is breathtaking. This is a wonderful build you are on!

Kind regards
Patrick

Thanks Patrick. As always I appreciate your comments and following along with my build.
RAGIII

Quote from: ondra on March 06, 2015, 05:45:44 PM

Great job, Rick, there is a lovely build going on in this thread. Thumbs up.

Thanks for posting the pics, S.E.5a is on my wish list too, so I will take inspiration from your progress.

Cheers.

Ondra

Thanks Ondra, I am sure you will build a Masterpiece in your chosen scale!
RAGIII

Quote from: radio on March 06, 2015, 07:30:28 PM

Exellent work and paint Rick.
Martin

Thanks Martin, your comments are always appreciated!
RAGIII

Quote from: rhallinger on March 06, 2015, 09:31:26 PM

Quote from: IFF1418 on March 06, 2015, 05:35:11 PM
Hello Rick,

The interior looks gorgeous my friend. The woodpainting is breathtaking. This is a wonderful build you are on!

Kind regards
Patrick

+1. Looking very fine Rick!

Regards,

Bob

Thanks for following along and the positive comments Bob!
RAGIII

Quote from: NinetythirdLiberator on March 07, 2015, 01:49:09 AM

Nice work, Rick...great wood treatment. I've always thought that darn Se-5 seat looks so uncomfortable!

This is fun to watch...Dan

Thanks for looking in Dan. I appreciate your comment!
RAGIII

mgunns · « **Reply #48 on:** March 10, 2015, 03:41:45 AM »

Hi Rick:

You are a taking on quite the challenge with this kit and doing yeomans work. The pulley access panels really add to the kit, not a job for the faint hearted. I have this kit and would like to do it in McCuddens markings as well, but; for those pulley access panels, I may have started on it.
Looking good Rick and I will be checking in to see how you are coming along.

Best

Mark

dtomko · « **Reply #49 on:** March 10, 2015, 06:06:26 AM »

Looking great, Rick.

Drew

jknaus · « **Reply #50 on:** March 10, 2015, 11:41:00 PM »

Man that looks good. Love the wood work.
James

dr 1 ace · « **Reply #51 on:** March 11, 2015, 07:38:57 AM »

Back home and just catching up, great work so far, it will be up to WNW standard !

Ed

Nigel Jackson · « **Reply #52 on:** March 11, 2015, 08:37:27 AM »

Lovely work, Rick. For me the SE5a was a thoroughbred amongst aircraft and you are really doing it justice.

Best wishes
Nigel

RAGIII · « **Reply #53 on:** March 11, 2015, 09:18:54 AM »

Quote from: mgunns on March 10, 2015, 03:41:45 AM

Hi Rick:

You are a taking on quite the challenge with this kit and doing yeomans work. The pulley access panels really add to the kit, not a job for the faint hearted. I have this kit and would like to do it in McCuddens markings as well, but; for those pulley access panels, I may have started on it.
Looking good Rick and I will be checking in to see how you are coming along.

Best

Mark

Thanks Mark. I agree that the pulley inspection panels add a lot to the kit. On my original doomed SE5a Viper pictured earlier I drilled and cut out the area and scratch built my own pulleys. The resin and PE pieces really make this easier

Overall the Roden/Encore kit is really fairly nice. I just ordered the WNW SE and may add it to this build for comparison... after all There is APF Rhys Davids scheme that would go great with McCuddens

RAGIII

Quote from: dtomko on March 10, 2015, 06:06:26 AM

Looking great, Rick.

Drew

Thanks Drew, Your comment is appreciated!
RAGIII

Quote from: jknaus on March 10, 2015, 11:41:00 PM

Man that looks good. Love the wood work.
James

James, Thanks for the positive feedback!
RAGIII

Quote from: dr 1 ace on March 11, 2015, 07:38:57 AM

Back home and just catching up, great work so far, it will be up to WNW standard !

Ed

Thanks Amigo! I bet you are already missing that grandbaby!
RAGIII

Quote from: Nigel Jackson on March 11, 2015, 08:37:27 AM

Lovely work, Rick. For me the SE5a was a thoroughbred amongst aircraft and you are really doing it justice.

Best wishes
Nigel

Thanks Nigel. I agree that the SE was a Work Horse of aircraft!
RAGIII

WarrenD · « **Reply #54 on:** March 11, 2015, 10:06:30 AM »

Great work so far Rick, and your wood grain is beautiful.

Warren

Ernie · « **Reply #55 on:** March 11, 2015, 11:39:55 AM »

You are doing a wonderful job, Rick. Great wood effects!
Looking forward to the next updates, my friend.

Cheers,
Ernie

BigBlue · « **Reply #56 on:** March 15, 2015, 04:36:50 AM »

Your build continues to impress, Rick. The woodwork looks lovely.

Chris

RAGIII · « **Reply #57 on:** March 31, 2015, 09:53:02 AM »

Quote from: WarrenD on March 11, 2015, 10:06:30 AM

Great work so far Rick, and your wood grain is beautiful.

Warren

Thanks Warren! I was holding off expecting my WNW SE to arrive any day. It seems my order went astray somewhere in the US and returned to New Zealand so I started back just using the WNW directions to add some details. I will post photos in the next day or so. Not a whole lot done due to the delay. I re worked the seat cushion and added a few bits to the interior since the last photos. I am ready to add the control lines for elevators and rudder.
RAGIII

Quote from: Ernie on March 11, 2015, 11:39:55 AM

You are doing a wonderful job, Rick. Great wood effects!
Looking forward to the next updates, my friend.

Cheers,
Ernie

Thanks Ernie! Always appreciate your comments.
RAGIII

Quote from: BigBlue on March 15, 2015, 04:36:50 AM

Your build continues to impress, Rick. The woodwork looks lovely.

Chris

Thanks for looking in and your comment Chris!
RAGIII

RAGIII · « **Reply #58 on:** April 01, 2015, 05:08:47 PM »

The only photo I have taken shows the left fuselage with the re-do of the seat cushion and some beginnings of control details copied from the WNW instructions and built using sheet styrene.
RAGIII

albandse 013 by ragfokker, on Flickr

Adam · « **Reply #59 on:** April 01, 2015, 07:05:09 PM »

RAGIII I have two Roden SE 5 in my stash, one I won here

http://forum.ww1aircraftmodels.com/index.php?topic=4366.0
So I will be looking here to learn.
I wish you to get your WNW SE 5 very quickly.
Adam