Author Topic: WNW DH2: J.T.B. McCudden 29 Squadron: Plus Albatros (Read 57556 times)

RAGIII · « **Reply #210 on:** January 28, 2022, 05:47:16 AM »

Thanks for the Idea Rafael! It is probably above My Paygrade and Skill Level

RAGIII

Bughunter · « **Reply #211 on:** January 28, 2022, 06:04:08 AM »

Rick, the original had a plate with the connected turnbuckles, so I made a plate with 5 wires to and glued 5 Gaspacth turnbuckles to it (in 1/48, you know).

Good luck with the rigging of the booms, I hope they are strong enough!

Cheers,
Frank

RAGIII · « **Reply #212 on:** January 28, 2022, 06:27:06 AM »

Quote from: Bughunter on January 28, 2022, 06:04:08 AM

Rick, the original had a plate with the connected turnbuckles, so I made a plate with 5 wires to and glued 5 Gaspacth turnbuckles to it (in 1/48, you know).

Good luck with the rigging of the booms, I hope they are strong enough!

Cheers,
Frank

You Guys are Killin Me

RAGIII

Rafael Berlin · « **Reply #213 on:** January 28, 2022, 06:49:18 AM »

@Frank: terrific work with that turnbuckles. 1/48... Thumbs up!!

@Rick: I still have the PE parts. So if anything goes wrong I could send them to you.

Best Regards
Rafael

Alexis · « **Reply #214 on:** January 28, 2022, 12:51:04 PM »

Been a bit since I last looked in . Looking fab with the booms in place . Excellent encouragement to get tackling more of my project .

Also awaiting your solution for the turnbuckles for the flight controls , will be facing this stage myself soon with some neat solutions already presented .

Alexis

RAGIII · « **Reply #215 on:** January 29, 2022, 03:05:17 AM »

Quote from: Rafael Berlin on January 28, 2022, 06:49:18 AM

@Frank: terrific work with that turnbuckles. 1/48... Thumbs up!!

@Rick: I still have the PE parts. So if anything goes wrong I could send them to you.

Best Regards
Rafael

Thanks, I will keep this in Mind!
RAGIII

Quote from: Alexis on January 28, 2022, 12:51:04 PM

Been a bit since I last looked in . Looking fab with the booms in place . Excellent encouragement to get tackling more of my project .

Also awaiting your solution for the turnbuckles for the flight controls , will be facing this stage myself soon with some neat solutions already presented .

Alexis

Thanks Alexis. I Look forward to your continuing with your DH2!

While thinking over the remaining rigging on the DH2 I did some Oil work on the Albatros DIII. Just a bit more to do then the final rigging(elevator control lines), then the final clear coats and it is done. Sharp eyes May have noted that I changed the title from Albatri to Albatros. I have decided to put the DII on Hold for a while as even with MY jig I am having difficulty with the upper wing. No Major disasters just Frustration!

RAGIII

KiwiZac · « **Reply #216 on:** January 29, 2022, 04:10:58 AM »

It's still weird for me seeing a D.III with a painted fuselage rather than standard ply finish but it looks so, so good Rick. Excellent work!

Quote from: RAGIII on January 29, 2022, 03:05:17 AM

Sharp eyes May have noted that I changed the title from Albatri to Albatros. I have decided to put the DII on Hold for a while as even with MY jig I am having difficulty with the upper wing. No Major disasters just Frustration!

I have the Roden 1/72 D.II on hold for much the same reason. But I'm optimistic it will be finished this year!

RAGIII · « **Reply #217 on:** January 29, 2022, 04:50:22 AM »

Quote from: KiwiZac on January 29, 2022, 04:10:58 AM

It's still weird for me seeing a D.III with a painted fuselage rather than standard ply finish but it looks so, so good Rick. Excellent work!

Quote from: RAGIII on January 29, 2022, 03:05:17 AM
Sharp eyes May have noted that I changed the title from Albatri to Albatros. I have decided to put the DII on Hold for a while as even with MY jig I am having difficulty with the upper wing. No Major disasters just Frustration!
I have the Roden 1/72 D.II on hold for much the same reason. But I'm optimistic it will be finished this year!

Thanks Zac. All 4 of My Albatros DV/Vas' and MY DI have at least partial ply fuselages. Funny thing is both of My DIIs' are overpainted

( The other one is a red MvR bird. )
RAGIII

kensar · « **Reply #218 on:** January 29, 2022, 06:28:03 AM »

Your D.III is lookin' mighty fine!

RAGIII · « **Reply #219 on:** January 29, 2022, 07:11:28 AM »

Quote from: kensar on January 29, 2022, 06:28:03 AM

Your D.III is lookin' mighty fine!

Thanks Ken, This one should go to completed Models in a day or two

RAGIII

RAGIII · « **Reply #220 on:** January 29, 2022, 09:26:20 AM »

I am calling the DIII Done. More soon in the Completed Models Section:

RAGIII

Link to Completed Models:
https://forum.ww1aircraftmodels.com/index.php?topic=12844.0

KiwiZac · « **Reply #221 on:** January 30, 2022, 03:49:16 AM »

You know what this means: there are no reasons left not to work on the DH.2!!

lone modeller · « **Reply #222 on:** January 30, 2022, 05:39:13 AM »

Yes Zac is completely right Rick!

Stephen.

RAGIII · « **Reply #223 on:** February 01, 2022, 05:35:06 AM »

Quote from: KiwiZac on January 30, 2022, 03:49:16 AM

You know what this means: there are no reasons left not to work on the DH.2!!

Quote from: lone modeller on January 30, 2022, 05:39:13 AM

Yes Zac is completely right Rick!

Stephen.

RAGIII

Alexis · « **Reply #224 on:** February 01, 2022, 09:32:17 AM »

Going to have a peek now !

Alexis