Author Topic: Toms Model Works Pfalz D.VII/III (Read 45136 times)

RAGIII · « **Reply #120 on:** January 06, 2021, 12:28:51 AM »

I thought I had commented earlier but obviously I was wrong. The struts and spreader are looking great. Engine and cowling are Fantastic!
RAGIII

Alexis · « **Reply #121 on:** January 06, 2021, 05:13:02 AM »

Thanks Rick ,

But I'm having troubles getting the plastic to bond to the white metal , but I will get it figured out . Will have another up-date shortly .

Alexis

Brian James Riedel · « **Reply #122 on:** January 07, 2021, 05:30:19 AM »

It took me forever to get the ribs to bond with the cowling when I built it. Just chalked it up to my eternal struggle with super glue.

Brian Riedel

Alexis · « **Reply #123 on:** January 07, 2021, 11:17:40 AM »

Hello Brian ,

Your cowl turned out really nice with the added ribs . I feel this is a detail which could have been molded in but one can't be picky I guess . Thanks for sharing your build again .

Made a bit of progress on the undercarriage legs which I still need include the mounting pins . Next step in getting it put together .

Alexis

RAGIII · « **Reply #124 on:** January 08, 2021, 12:02:45 AM »

The gear looks like it will be awesome Alexis!
RAGIII

Alexis · « **Reply #125 on:** January 08, 2021, 07:55:46 AM »

I hope so Rick

Alexis

Alexis · « **Reply #126 on:** January 10, 2021, 09:06:47 AM »

Past few days go by ending in the landing gear legs and axle being put together . Leaving just the PE parts for the fuselage being left then it's off to painting and decaling !

Alexis

RAGIII · « **Reply #127 on:** January 10, 2021, 09:51:22 AM »

Looks great A👍
RAGIII

Bughunter · « **Reply #128 on:** January 10, 2021, 11:22:24 PM »

You made a nice progress on this one!
The undercarriage and the cowlings looks great.
I would like to add this bird to my stash, if I can find one.

Cheers,
Frank

Alexis · « **Reply #129 on:** January 11, 2021, 03:45:28 AM »

Danke Rick und Frank

Frank , I do hope you are able to find to add to the stash .

Alexis

Monty · « **Reply #130 on:** January 11, 2021, 04:48:47 AM »

That undercarriage looks really good Alexis... some useful mounting pins there... good progress! Marc.

Brian James Riedel · « **Reply #131 on:** January 11, 2021, 08:58:24 AM »

Howdy,

Lone star models still has their future kit listed.

https://lonestarmodels.com/product-category/lsm/1-48/complete-kits-1-48/page/2/

Brian Riedel

Alexis · « **Reply #132 on:** January 11, 2021, 10:57:24 AM »

Thanks Marc

PE parts are in place and ready for primer . I did have to move the location holes on the front of the fuselage struts . The placement points on the kit parts are not correct , but this is do to the shape of the nose which isn't correct . Totally forgot about the cab struts and these will get re-pinned to match the locations in the top wing . Either way , I'm ready for priming and painting

Alexis

Alexis · « **Reply #133 on:** January 11, 2021, 10:57:46 AM »

Alexis · « **Reply #134 on:** January 11, 2021, 10:58:14 AM »

Note all the air bubbles which needed filling , this was done with really thick super glue , sanded and polished to shape .

Alexis