Hi all,
I've pre-rigged the two wings with 0.4 mm diameter blackened Brass tube, 'GasPatch 1:48th Type turnbuckles and 0.08 mm diameter mono-filament.
A line is passed through a tube and turnbuckle then back through the tube and secured.
The free end of the line is then passed through a hole in the wing and a tube and turnbuckle added.
The end result if a free moving and double ended turnbuckle, which should self-align when the landing and wing warp lines are attached to the free end of the turnbuckles.
The two V struts are also fitted with wing warp control cables fitted to the rear strut.
Finally, I've added the tail plane control lever and cable to the fuselage underside.
Now onto fitting the wings and support frame,
Mike