Hi all,
After the trials and tribulations of several resin model builds recently, I thought I'd do a 'mojo' build.
I've chosen the 'Special Hobby' 1:32nd Bristol M1.c 'Bullet'.
This particular model build will depict the Bristol M.1c ‘Bullet’, Serial No. C4907 of No.150 Squadron RAF, operating in Macedonia during 1918.
This aircraft was flown by Lt. K.B. Moseley, who was credited with the shooting down of an Albatros D.V on the 9th of July, 1918 over the Rupel Pass.
This same aircraft was also flown by Lt. J.P. Cavers, who was credited with the shooting down of a LVG on the 1st of September and another LVG on the 2nd of September.
The underside of the wings and fuselage were said to be a light blue colour, apparently to reduce the absorbed heat reflected from the ground.
It's thought the propeller spinner was of the same colour.
The colour of the upper surfaces has been depicted as either a red/brown (PC 12) or an olive green (early PC10).
The kit instructions and the colour profile by artist Ronnie Barr have the PC12 colour, whereas the ‘Windsock’ Data file colour is PC10.
As always the definition of colours from early monochrome photographs has always been problematic and the shade differences between PC10 and PC12 are no exception.
The ’Windsock’ Data file states that it may have been that these aircraft were painted with PC12 when routed through the aircraft depot at Salonika, Greece.
However, it was more likely the colour of aircraft operated in Macedonia were PC10, with the possible exception of No.72 Squadron.
I've decided to use the PC10 colour, based on the ‘Windsock’ data.
Mike