Author Topic: Don't get PUSHY with me ! (Read 32353 times)

ondra · « **Reply #465 on:** August 03, 2022, 04:53:16 PM »

Very nice so far, Alexis, will keep watching with great interest!

Cheers

Ondra

PrzemoL · « **Reply #466 on:** August 03, 2022, 05:51:46 PM »

Great progress, Alexis. And I quite positive that any warp (if there is one indeed) can be fixed by proper tensioning of the cables. Good luck!

pepperman42 · « **Reply #467 on:** August 03, 2022, 10:18:04 PM »

Exceptional work on a trying part of the build!!

Steve

lone modeller · « **Reply #468 on:** August 04, 2022, 06:34:37 AM »

Looking at what you have done so far Alexis, I think that you are being too critical of your work. Tail booms are not easy to assemble or rig, but with patience and experience they do get easier. This is going to be a top notch model when it is finished.

Stephen.

Alexis · « **Reply #469 on:** August 08, 2022, 06:55:54 AM »

Thank you for the vote of confidence guys !

Did start to make progress on producing more turnbuckles after three in it dawned on me , forgot the attachment anchors . So I need to remove three eyelets and and this time wire up the hoop to the said attachment point

These are for the cross bracing wires going from the wing to tail . So I back at it ....

Alexis

IanB · « **Reply #470 on:** August 10, 2022, 01:58:16 AM »

That looks excellent to me, I can't see any warp.

Top job Alexis!

Ian

Rookie · « **Reply #471 on:** August 10, 2022, 02:34:22 AM »

I second that, I can't see anything wrong with it Alexis!

It looks grand!

Willem

Alexis · « **Reply #472 on:** August 12, 2022, 01:29:02 AM »

Thanks guys

Had last night off so a bit of time was spent at the bench to get some joy time in , not much was done but in ways it is a fair bit . Turn buckles for the booms to wings are in place and ready for their wires but I'm thinking that the control lines should be done first for these wires will be in the way . The ones for the landing gear are ready to be installed . Still have lots to make for the control horns now . and the last ones for the forward part of the fuselage .

Alexis

Alexis · « **Reply #473 on:** August 12, 2022, 01:29:29 AM »

Alexis · « **Reply #474 on:** August 12, 2022, 01:29:55 AM »

Allan31 · « **Reply #475 on:** August 12, 2022, 03:10:50 AM »

Looking good. So glad I can not work in this scale because of size limitations for those turn-buckles would make me crazy.
Last shot of the landing gear looks like the real thing....

FAf · « **Reply #476 on:** August 12, 2022, 03:41:49 AM »

Great work overall and specifically very nice turnbuckles!
/Fredrik

Umlaufmotor · « **Reply #477 on:** August 12, 2022, 06:28:07 AM »

Really a lot of detail work on the pusher. Great job!!

Servus
Bertl

Alexis · « **Reply #478 on:** August 13, 2022, 12:44:12 AM »

Quote from: Allan31 on August 12, 2022, 03:10:50 AM

Looking good. So glad I can not work in this scale because of size limitations for those turn-buckles would make me crazy.
Last shot of the landing gear looks like the real thing....

Thanks Allan , so 32 scale is to small for you ? To be honest it is with me as well at times .

Thank you as well Fredrik and Bertl

Alexis

pepperman42 · « **Reply #479 on:** August 13, 2022, 11:34:01 AM »

...think Allan is a 72/48er and there are some things you can do to a somewhat lesser extent whereas 1/32 what's see-able is do-able....your work is coming along very nicely.

Steve