Frank , not sure on being fast but I do plan out each step ahead of time , which in turn makes the build easier .
Thanks Kevin , I try to be different
Rick , not much clamping force needed . I use these to save on tape . Tamiya tape here is on the pricey side , but it is handy for areas the clamps won't work .
End of weekend progress report .
All the hinge detail is finished on the tail and main wings . In the instructions there is the option to leave the top wing solid or cut it down the center section . Well out comes the scriber and with in a few minutes it became two parts . So how is the pinning going to work . Since a 2mm spacer needs to be added in between them . I mount the struts after clean up gluing only the top end . I drilled out some 0.10mm round stock and cutting 2mm length sections . These I glued to the tops and a brass pin on the extra long side . The center bar is 0.9mm rod and this is a far as I got on the fuselage details . I still have a few more bits to added . Landing gear is also under way , but I'm having fit issue with at the moment .
Terri