Author Topic: WNW Salmson 2A2/Aviattic figures: WNW Pfalz DIIIa Jasta 4 (Read 121605 times)

Ernie · « **Reply #120 on:** November 02, 2015, 09:23:29 PM »

Terrific work on the Silbergrau, Rick. I think it looks spot-on.
The lack of seams and satiny look on the fuselage is gorgeous, my
friend.

Cheers,
Ernie

radio · « **Reply #121 on:** November 03, 2015, 02:25:54 AM »

Exellent painting of Silbergrau Rick.
Cheers
Martin

moustique · « **Reply #122 on:** November 03, 2015, 03:10:00 AM »

your paint is terrific
it seem you will find the best tone

Oeli · « **Reply #123 on:** November 03, 2015, 04:01:10 AM »

Hi,

so far so good!

Very good wood painting and the engines are also very nice.

I will be by your side, the next steps.
It´s interesting to see when you build two planes in the same time.

Regards

Jörg

Des · « **Reply #124 on:** November 03, 2015, 06:02:20 AM »

You have achieved an excellent result with the colour mix Rick, well done.

Des.

oldalbie · « **Reply #125 on:** November 03, 2015, 06:45:38 AM »

That was a good choice for the silbergrau Rick. From pictures I've seen of Pfalz D IIIs it also looks like there was a lot of staining from oil, fuel and other random grime and dirt which the mechanics probably tried to clean off as best they could.

coyotemagic · « **Reply #126 on:** November 03, 2015, 08:25:58 AM »

Perfect choice for the silbergrau, Rick! It contrasts brilliantly with the metal cowling.
Cheers,
Bud

RAGIII · « **Reply #127 on:** November 03, 2015, 09:16:16 AM »

Quote from: Ernie on November 02, 2015, 09:23:29 PM

Terrific work on the Silbergrau, Rick. I think it looks spot-on.
The lack of seams and satiny look on the fuselage is gorgeous, my
friend.

Cheers,
Ernie

Thanks Ernie. I always appreciate your comments!
RAGIII

Quote from: radio on November 03, 2015, 02:25:54 AM

Exellent painting of Silbergrau Rick.
Cheers
Martin

Thanks Martin!
RAGIII

RAGIII · « **Reply #128 on:** November 03, 2015, 09:22:47 AM »

Quote from: coyotemagic on November 03, 2015, 08:25:58 AM

Perfect choice for the silbergrau, Rick! It contrasts brilliantly with the metal cowling.
Cheers,
Bud

Thanks Amigo I appreciate you dropping by and commenting!
RAGIII

Quote from: oldalbie on November 03, 2015, 06:45:38 AM

That was a good choice for the silbergrau Rick. From pictures I've seen of Pfalz D IIIs it also looks like there was a lot of staining from oil, fuel and other random grime and dirt which the mechanics probably tried to clean off as best they could.

Thanks for the comments! I agree about the dirt and oil! I have to add the Jasta 4 wound ribbon in black then I will attempt to simulate some grime using oils!
RAGIII

Thanks Des, Hoplahop, and Moustique! I appreciate all of your comments. The Mix looks good to my eyes and I appreciate your agreement I think when I get around to doing my Roden DIII I might try ordering Drooling Bulldogs version to see how it looks as I had forgotten they made the color until reminded by Ondra

RAGIII

moustique · « **Reply #129 on:** November 10, 2015, 01:37:53 AM »

hi Rick
do you use gaspatch turnbuckles on your Pfalz
if yes which type do you use

RAGIII · « **Reply #130 on:** November 10, 2015, 09:09:01 AM »

Quote from: moustique on November 10, 2015, 01:37:53 AM

hi Rick
do you use gaspatch turnbuckles on your Pfalz
if yes which type do you use

Thanks for the question. I am almost... embarrassed to say that to date I have not used Turnbuckles

Something on my list to try soon. So the short answer is I don't know which Gaspatch Buckles you need but I am sure someone will chime in with the answer.
RAGIII

PS: A Very Small update. Just received the Excellent Aviattic Pfalz DIIIa 5 color Lozenge Decal set:

wnwsalmsonandpfalz 003_crop by Richard Geisler, on Flickr

wnwsalmsonandpfalz 002 by Richard Geisler, on Flickr

wnwsalmsonandpfalz 004 by Richard Geisler, on Flickr

wnwsalmsonandpfalz 005 by Richard Geisler, on Flickr

moustique · « **Reply #131 on:** November 10, 2015, 08:08:06 PM »

thank Rick

RAGIII · « **Reply #132 on:** November 18, 2015, 12:42:29 AM »

I have a question reference the Salmson. What color is the cowl ring? I have failed to find any suggestion in the WNW or Pheon directions, ( Probably poor research on my part), other than those that had specific colors for squadron or personal markings. Is it French brown matching the camo with a Silver/Aluminum ring where the exhausts are, or a weathered copper? Any suggestions welcome! Just as a reminder I am doing the Pheon scheme with the Eagle and Dachshund Marking.
RAGIII

PS: Re read the instructions and found my own answer

RAGIII · « **Reply #133 on:** November 19, 2015, 01:17:55 PM »

A small update. I have started to do the preliminary masking of the wound ribbon. This gives the rough basic location for the stripes. Next I will use tape to outline and finalize the ribbon masking, then spray them black. I have also done a little more painting on the Salmson. Next up I will do some weathering on the metal panels.
RAGIII

wnwsalmson 002 by Richard Geisler, on Flickr

wnwsalmson 003 by Richard Geisler, on Flickr

wnwsalmson 020 by Richard Geisler, on Flickr

wnwsalmson 005 by Richard Geisler, on Flickr

wnwsalmson 012 by Richard Geisler, on Flickr

radio · « **Reply #134 on:** November 19, 2015, 08:56:31 PM »

Very nice update Rick.
Cheers
Martin