Good Evening Gentlemen,
Thank you for the very generous comments about my work.
The Ronnie Bar decals certainly helped this one come alive.
The process I used for the wood decals is outlined below.
The Fuselage was sprayed with tamiya acrylics to give light and dark effects on the different panels, I used Flesh, Dark yellow, dessert yellow, white and dark brown. This was then sealed with an acrylic gloss varnish
Next the decals were cut to the shape of the panels using masking tape as a template, then applied using Gunze Sangyo Mr Mark Setter.
As I fitted the panels I sprayed them with acrylic gloss to seal them to prevent damage as I added the other panels
Once the wood decals had all been added I shaded the panels with tamiya clear orange and yellow then applied the markings and applied a satin varnish to finish it off
A full blog of the build can be found here
http://www.militarymodelling.com/forums/postings.asp?th=56961I hope this helps answer your question.
Best Regards
Keith