Author Topic: Sopwith 1B1 Roden 1/48  (Read 3252 times)

Offline iwik

  • Full Member
  • ***
  • Posts: 164
Sopwith 1B1 Roden 1/48
« on: March 10, 2015, 01:23:15 AM »
Hi y'all!
Here's another build that's a few months old.
The roden kit is really nice and the part photoetched sheet I used is virtually useless since all the cockpit will be hidden under the top wing.
Here is part 1:











See you soon for the paint job.
Ciao
Iwik



Offline coyotemagic

  • Hero Member
  • *****
  • Posts: 7710
  • "Here's to not buggering it up." -Winston Chuchill
    • My Models
Re: Sopwith 1B1 Roden 1/48
« Reply #1 on: March 10, 2015, 02:25:32 AM »
You're off to a brilliant start, Iwik!  Beautiful work on the interior and engine.  Is that the kit engine?  It sure is sweet!
Cheers,
Bud
"All men dream: but not equally. Those who dream in the dark recesses of the night awake in the day to find all was vanity. But the dreamers of day are dangerous men, for they may act their dreams with open eyes, and make it possible." -T. E. Lawrence

Offline Alexis

  • Hero Member
  • *****
  • Posts: 7947
  • Love the self
Re: Sopwith 1B1 Roden 1/48
« Reply #2 on: March 10, 2015, 09:30:13 AM »
Well , nice to see you go down a scale Iwik , the one true scale !


I used this kit for my floatplane conversion , how was the fit of the fuselage halves ? And was there any warpage ?

Nice PE parts , shame that none of it will be seen . Only thing which will be visible is the seat and instrument panel .

Nice detail on Vectors engine , what size of wire did you use for the pushrods ? Also like how the turtle deck is shaping up  :)



Terri
Hurra ! , Ich Leben Noch
Body and life is a vessel we use to travel the planet . Femininity is the gift , The miracle comes from what we do with it .

Offline Des

  • Administrator
  • Hero Member
  • ******
  • Posts: 9325
    • ww1aircraftmodels.com
Re: Sopwith 1B1 Roden 1/48
« Reply #3 on: March 10, 2015, 10:05:07 AM »
You have made great progress with this build Iwik, what you have done so far is excellent.

Des.
Late Founder of ww1aircraftmodels.com and forum.ww1aircraftmodels.com

Offline KitRookie37

  • Sr. Member
  • ****
  • Posts: 489
Re: Sopwith 1B1 Roden 1/48
« Reply #4 on: March 10, 2015, 04:12:55 PM »
Hello gentlemen,
What a start !!! Excellent !
Friendly.
Alain.
Use the force, Luke.

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 18859
Re: Sopwith 1B1 Roden 1/48
« Reply #5 on: March 10, 2015, 05:05:17 PM »
Outstanding Iwik!
RAGIII
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline iwik

  • Full Member
  • ***
  • Posts: 164
Re: Sopwith 1B1 Roden 1/48
« Reply #6 on: March 10, 2015, 09:21:49 PM »
Hi!
Thanks for the kind words!

TERRI: No wrappage on my kit that I remember of. The only problem with them is that they are conceived for the two seater version. You have to add an extra top decking to the rear part which of course makes a big step and would make all details dissappear with the sanding process. Hence my decision to level everything and make some grooves in which I glued some copper wires, covered with putty. Careful sanding and voilą! As for the ignition wires, these are just copper wires you can find in any electric wires. Just find an old kitchen ustensil and take the electric cable apart.

Ciao
Iwik

Offline radio

  • Hero Member
  • *****
  • Posts: 3952
Re: Sopwith 1B1 Roden 1/48
« Reply #7 on: March 11, 2015, 05:00:11 AM »
Wonderful work Iwik.
Martin

Offline iwik

  • Full Member
  • ***
  • Posts: 164
Re: Sopwith 1B1 Roden 1/48
« Reply #8 on: March 14, 2015, 05:27:41 AM »
Hi y'all!
Last pics!

















All paint work done without masking tape. I'm done (almost) with those pains...
Hope you like it!
Ciao
Iwik

Offline coyotemagic

  • Hero Member
  • *****
  • Posts: 7710
  • "Here's to not buggering it up." -Winston Chuchill
    • My Models
Re: Sopwith 1B1 Roden 1/48
« Reply #9 on: March 14, 2015, 08:06:59 AM »
She's absolutely stunning, Iwik!  The Strutter is one of my favorites and you've done a remarkable job on her.  When I get around to doing mine, I'll be thrilled if it turns out half as sweet as yours.
Cheers,
Bud
"All men dream: but not equally. Those who dream in the dark recesses of the night awake in the day to find all was vanity. But the dreamers of day are dangerous men, for they may act their dreams with open eyes, and make it possible." -T. E. Lawrence

Offline Pgtaylorart

  • Hero Member
  • *****
  • Posts: 1480
Re: Sopwith 1B1 Roden 1/48
« Reply #10 on: March 14, 2015, 08:20:45 AM »
Amazing work, Iwik, and you built it incredibly fast!

George

Offline Des

  • Administrator
  • Hero Member
  • ******
  • Posts: 9325
    • ww1aircraftmodels.com
Re: Sopwith 1B1 Roden 1/48
« Reply #11 on: March 14, 2015, 08:44:14 AM »
An incredible looking model Iwik, the overall finish on this model is superb and the rigging is excellent, well done.

Des.
Late Founder of ww1aircraftmodels.com and forum.ww1aircraftmodels.com

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 18859
Re: Sopwith 1B1 Roden 1/48
« Reply #12 on: March 14, 2015, 09:28:00 AM »
She's absolutely stunning, Iwik!  The Strutter is one of my favorites and you've done a remarkable job on her.  When I get around to doing mine, I'll be thrilled if it turns out half as sweet as yours.
Cheers,
Bud

Same here! Although I will need to wait until WNW releases one!
RAGIII
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline Alexis

  • Hero Member
  • *****
  • Posts: 7947
  • Love the self
Re: Sopwith 1B1 Roden 1/48
« Reply #13 on: March 14, 2015, 09:35:03 AM »
What can say Iwik , you never let us down . Outstanding job !





Terri
Hurra ! , Ich Leben Noch
Body and life is a vessel we use to travel the planet . Femininity is the gift , The miracle comes from what we do with it .

WarrenD

  • Guest
Re: Sopwith 1B1 Roden 1/48
« Reply #14 on: March 14, 2015, 09:38:38 AM »
Drop dead gorgeoud Iwik!  I love French 1 1/2 Strutters too.  So sorry I came late to watch this build.

Warren