« previous next »
Pages: 1 ... 6 7 [8] 9 10 ... 15

Author Topic: Bentley Br2 1:32  (Read 42390 times)

Offline PrzemoL

  • Hero Member
  • *****
  • Posts: 5296
  • There was Eru... and he made first the Ainur...
    • Przemysław Litewka
Re: Bentley Br2 1:32
« Reply #105 on: August 22, 2015, 08:41:11 AM »
You have built it!  :o Well, I think I will get me that WNW Snipe to accompany this jewel.
Logged
Ash nazg durbatuluk, ash nazg gimbatul,
Ash nazg thrakatuluk, agh burzum-ishi krimpatul.

Offline Jamo

  • Hero Member
  • *****
  • Posts: 1123
  • Wellington, NZ
    • My Smugmug album
Re: Bentley Br2 1:32
« Reply #106 on: August 22, 2015, 10:16:18 AM »
I am eagerly awaiting the release of this model, more than any for a long time. You should be very proud Lukasz, finest craftsmanship.
Great photography too  ;)
Respect!
Cheers
James
Logged
Happy Modelling
James Fahey

Check out my massive photo collection here: https://jamesfahey.smugmug.com/

Offline Pgtaylorart

  • Hero Member
  • *****
  • Posts: 1480
Re: Bentley Br2 1:32
« Reply #107 on: August 22, 2015, 11:58:25 AM »
That is your best engine you have built, Lukasz! And your painting is the best I've ever seen on a rotary engine! Wow, wow, and more wow!! I can't say enough!

George
Logged

Offline lcarroll

  • Administrator
  • Hero Member
  • ******
  • Posts: 8654
Re: Bentley Br2 1:32
« Reply #108 on: August 22, 2015, 12:33:02 PM »
Lukasz,
   That is just amazing! The detail you've designed into this masterpiece is beyond what I'd have thought possible, you can be very proud of this accomplishment. As already said by Des, it looks like the real engine, I'm running out of words!
   My unreserved compliments on some incredibly good work. :o 8)
Cheers,
Lance
Logged

Offline Pgtaylorart

  • Hero Member
  • *****
  • Posts: 1480
Re: Bentley Br2 1:32
« Reply #109 on: August 22, 2015, 02:00:10 PM »
I'm going to have to build my Snipe with the cowl off to show off this masterpiece!

George
Logged

Offline KitRookie37

  • Sr. Member
  • ****
  • Posts: 489
Re: Bentley Br2 1:32
« Reply #110 on: August 22, 2015, 04:56:10 PM »
Hello gentlemen and ladies,
What accuracy !! I can smell burnt oil. Bravo !!!!!
Best regards.
Alain.
Logged
Use the force, Luke.

Offline Thumbs up

  • Hero Member
  • *****
  • Posts: 607
Re: Bentley Br2 1:32
« Reply #111 on: August 22, 2015, 08:31:12 PM »
A masterpiece,a supreme work of art!!!! Bravo BRAVO BRRRAAAAAVVVVVOOOOOOOOOOO!!!!!!!!
Logged

Offline uncletony

  • Hero Member
  • *****
  • Posts: 4384
    • Aircraft In Pixels
Re: Bentley Br2 1:32
« Reply #112 on: August 22, 2015, 09:46:14 PM »
Wow.
Logged

Offline taurusmodels

  • Moderator
  • Full Member
  • *****
  • Posts: 248
Re: Bentley Br2 1:32
« Reply #113 on: August 23, 2015, 12:10:36 AM »
Thanks a lot!

Finally ready. I was going to start selling from now, but I have to wait just a little for protective foams (parts are really fragile!) and box covers. Now engine is available as a pre-order (of course all of you, who booked engines have a first cast series) I will have everything at Wednesday.

Concerning to building - It was little challenging. I had to correct crankcase - I pre-drilled wholes for mounting of cylinders, but a few were slightly shifted, and maintaining correct geometry was impossible. Fortunately I had a "backup" of an early stage and was able to correct it. Evening I'll start a new topic - "how to build Br2" or similar with step-by step building :)

Could you look at the project of the box? If you see any mistake, let me know. Of course not for free :) each mistake = a set from Taurus :)







Logged

Offline uncletony

  • Hero Member
  • *****
  • Posts: 4384
    • Aircraft In Pixels
Re: Bentley Br2 1:32
« Reply #114 on: August 23, 2015, 12:20:44 AM »
box looks great.

I would suggest "wire" instead of "wires" -- unless there is more than 1 piece of wire in the box (i assume it's up to the modeler to cut them to length)

Logged

Offline Pgtaylorart

  • Hero Member
  • *****
  • Posts: 1480
Re: Bentley Br2 1:32
« Reply #115 on: August 23, 2015, 12:43:24 AM »
Just placed my order! :)

George
Logged

Offline the great waldo

  • Full Member
  • ***
  • Posts: 188
Re: Bentley Br2 1:32
« Reply #116 on: August 23, 2015, 04:14:44 AM »
Quote from: taurusmodels on August 23, 2015, 12:10:36 AM
Thanks a lot!

Finally ready. I was going to start selling from now, but I have to wait just a little for protective foams (parts are really fragile!) and box covers. Now engine is available as a pre-order (of course all of you, who booked engines have a first cast series) I will have everything at Wednesday.

Concerning to building - It was little challenging. I had to correct crankcase - I pre-drilled wholes for mounting of cylinders, but a few were slightly shifted, and maintaining correct geometry was impossible. Fortunately I had a "backup" of an early stage and was able to correct it. Evening I'll start a new topic - "how to build Br2" or similar with step-by step building :)

Could you look at the project of the box? If you see any mistake, let me know. Of course not for free :) each mistake = a set from Taurus :)
Hi Lukasz

I just put my order in, thanks in advance

Andrew




Logged

Offline andyw

  • Jr. Member
  • **
  • Posts: 53
Re: Bentley Br2 1:32
« Reply #117 on: August 23, 2015, 05:29:25 AM »
Should be 'Resin model of a British rotary engine Bently BR.2' OK,Ok, I confess! I am clutching at straws here in the hope of 'each mistake=a set from Taurus.'
Logged

Offline taurusmodels

  • Moderator
  • Full Member
  • *****
  • Posts: 248
Re: Bentley Br2 1:32
« Reply #118 on: August 23, 2015, 07:25:18 AM »
Andy, Bo - you hit!!! Thanks a lot! Of course additional sets to yours orders :)

Another question: 1st cast certificate or 1st cast's certificate?
Sorry for such a stupid questions :/
Logged

Offline FarEast

  • Sr. Member
  • ****
  • Posts: 443
Re: Bentley Br2 1:32
« Reply #119 on: August 23, 2015, 07:45:36 AM »
Quote from: taurusmodels on August 23, 2015, 07:25:18 AM
Andy, Bo - you hit!!! Thanks a lot! Of course additional sets to yours orders :)

Another question: 1st cast certificate or 1st cast's certificate?
Sorry for such a stupid questions :/

Hi Lukasz,

WOW, Just wow..... I just read the whole thread and you blow me away sir!

Having just completed your amazing Gnome Monosoupape 100hp British rotary engine I can't even comprehend how these are made from scratch - it left me physically and mentally exhausted - But I'm now addicted to your amazing models!


In regards to your question I would say either "First Casting Certificate of Authenticity" or "Limited Edition First Casting Certificate of Authenticity"

And Yes put me down for one! I have a Snipe that is dying to meet this beauty!
Logged
Pages: 1 ... 6 7 [8] 9 10 ... 15
« previous next »