Author Topic: RWD-10 ( 1/72, Ardpol) (Read 3016 times)

PrzemoL · « **on:** August 04, 2025, 06:08:38 AM »

One more little project from the side line of my interests.
A resin kit of a lovely acrobatics trainer from RWD company dated at mid 1930s.

The kit is long unavailable, yet I was lucky to grab a second hand copy at one of Polish modeling contests last year and now its turn has finally come.

Preparations are now well underway. The enigma interior is built with some guesses, especially regarding the ailerons control gear and throttle linkage, also the surprisingly missing rudderbar was made from scratch wire bits. The flimsy struts are armed with wire inserts, undercarriage struts lengthened by 1 to 1.5 mm plastic bits. More to come.

DaddyO · « **Reply #1 on:** August 04, 2025, 06:44:18 AM »

Following with interest Prze

There was a free flight model of this one which I remember seeing tootling around at one of the indoor events (Scale Nats at Nottingham perhaps?) Seeing your build reminds me how pretty it is. Looking forward to watching your progress

Paul

NigelR · « **Reply #2 on:** August 04, 2025, 07:07:45 PM »

Another little gem in progress.

PrzemoL · « **Reply #3 on:** August 08, 2025, 12:37:19 AM »

Thank you, Nigel and Paul, for your interest in my build.

Fuselage ready for closing.

PrzemoL · « **Reply #4 on:** August 08, 2025, 04:28:57 AM »

Closed. Seams filled with CA, curing, awaiting polishing.

NigelR · « **Reply #5 on:** August 08, 2025, 06:14:56 PM »

Looking very good. I have found CA to be my favourite method of filling seams, especially the VMS black CA.

PrzemoL · « **Reply #6 on:** August 10, 2025, 06:41:35 PM »

Thanks, Nigel.

Main cabane supports attached, the wing dry fit, everything looks promising.

NigelR · « **Reply #7 on:** August 11, 2025, 06:04:34 PM »

It does indeed look very promising!

PrzemoL · « **Reply #8 on:** August 14, 2025, 06:27:00 AM »

Some colours finally...

PrzemoL · « **Reply #9 on:** August 15, 2025, 08:36:28 AM »

And the other sides, decalled and sealed, too.
Now for some delicate shading of linen surfaces.

NigelR · « **Reply #10 on:** August 15, 2025, 06:07:08 PM »

A very colourful looking set of decals Looking forward to your subtle shading, I really admire the way you do that.

PrzemoL · « **Reply #11 on:** August 19, 2025, 04:39:07 AM »

Shading and wash complete, everything is ready for the final assembly.

NigelR · « **Reply #12 on:** August 20, 2025, 06:06:41 PM »

Lovely. I knew I would like the way you did that....

Jorgo · « **Reply #13 on:** August 21, 2025, 03:38:28 AM »

What a lovely bird! Excellent shading and built!

Joerg

PrzemoL · « **Reply #14 on:** August 21, 2025, 08:18:53 AM »

Thank you, Nigel and Joerg.

And some progress with the assembly. Not an easy deal, all the struts had to be adjusted but finally it is almost ready and the geometry is kept.