Author Topic: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)  (Read 1271 times)

Offline PrzemoL

  • Hero Member
  • *****
  • Posts: 3429
  • There was Eru... and he made first the Ainur...
    • Przemysław Litewka
Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« on: October 22, 2020, 12:46:35 AM »
Let me present my vision of Ltn. Emile Paumier's Ni17 from Esc. N76. The early version of CSM kit, basically from the box, just the Gaspatch turnbuckles (in 48th scale variant) and a few connections in the pit were added. All together a lovely kit, with nice detailing, good fit, fine decals, etc. I am only complaining about the fuselage split into very many parts and... the subject itself, as I am not a big fan of sesquiplanes... Still, here it is and now I am eagerly awaiting that promised Caudron G.III...




















Ash nazg durbatuluk, ash nazg gimbatul,
Ash nazg thrakatuluk, agh burzum-ishi krimpatul.

Offline Vickers

  • Sr. Member
  • ****
  • Posts: 401
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #1 on: October 22, 2020, 12:53:28 AM »
I truly enjoyed following your progress on this model. Your Noop turned out beautifully! Great build from rudder to prop hub.
Bruno: "How many rules are there?"

Willi: "I don't know... none of zem have ever been written down."

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 15193
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #2 on: October 22, 2020, 01:26:14 AM »
As I said before a Stunning build all around. One of the Best builds of this kit I have seen!
RAGIII
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline kensar

  • Hero Member
  • *****
  • Posts: 1446
  • Reshaping the world - one piece at a time.
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #3 on: October 22, 2020, 03:04:45 AM »
I'm almost surprised you didn't build a Polish plane.  Excellent results with a nice level of detail.

Offline bobs_buckles

  • Hero Member
  • *****
  • Posts: 3368
  • Wingnutter!
    • Bobs Buckles
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #4 on: October 22, 2020, 03:52:39 AM »
Another masterpiece!  :o
Lovely!

vB  ;)



https://www.bobsbuckles.co.uk/

Perfection is paralysis.

Offline gcn

  • Sr. Member
  • ****
  • Posts: 419
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #5 on: October 22, 2020, 04:07:25 AM »
Nice job as usual, I donít know how you rattle through them so quickly.

Would you consider the fuselage issues as annoying rather than anything difficult to deal with.

Offline Old Man

  • Hero Member
  • *****
  • Posts: 600
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #6 on: October 22, 2020, 04:25:42 AM »
That's a great model, Sir!

I like the Nieuport sesquiplanes, and you've built one up proud.

Offline lone modeller

  • Hero Member
  • *****
  • Posts: 3896
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #7 on: October 22, 2020, 05:39:08 AM »
That is a truly stunning model. I especially like the oil staining under the fuselage and the super overall finish. Many congratulations on another superb build.

Stephen.

Offline Alexis

  • Hero Member
  • *****
  • Posts: 5709
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #8 on: October 22, 2020, 12:08:20 PM »
 :)



Terri
Hurra ! , Ich Leben Noch

Offline PrzemoL

  • Hero Member
  • *****
  • Posts: 3429
  • There was Eru... and he made first the Ainur...
    • Przemysław Litewka
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #9 on: October 22, 2020, 03:50:51 PM »
Thank you, everyone. I am glad that you like this model more than I do. :-)

I'm almost surprised you didn't build a Polish plane.  Excellent results with a nice level of detail.

I would love to. But I learned when the model was released, from Melius Manu staff, who were involved in the kit design, that the several apparent Ni17s in Polish post-war service were actually Ni23s... So I gave it up with some regret.


Nice job as usual, I donít know how you rattle through them so quickly.
Would you consider the fuselage issues as annoying rather than anything difficult to deal with.

Definitely, just annoying. Not difficult at all  ;) Even I managed to cope with those seams :)
Ash nazg durbatuluk, ash nazg gimbatul,
Ash nazg thrakatuluk, agh burzum-ishi krimpatul.

Offline crouthaj

  • Jr. Member
  • **
  • Posts: 94
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #10 on: October 23, 2020, 01:09:22 AM »
Beautiful work! Your rib-taping on the top wings is particularly spectacular. Thanks for sharing the model.

Jason

Offline Nigrivender

  • Jr. Member
  • **
  • Posts: 64
  • Do wrong and it will be good
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #11 on: October 23, 2020, 03:27:40 AM »
Beautiful model. Very nice made, I wonder if I will ever reach your level.
If something can't be repaired it means it's not broken

Offline Marcus.Q1000859

  • Newbie
  • *
  • Posts: 35
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #12 on: October 23, 2020, 04:43:19 AM »
A very nice build and your colours are fantastic!
Marcus

Offline PrzemoL

  • Hero Member
  • *****
  • Posts: 3429
  • There was Eru... and he made first the Ainur...
    • Przemysław Litewka
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #13 on: October 23, 2020, 05:50:11 PM »
Thank you, Jason, Rafał and Marcus. I appreciate very much your kind comments.

Beautiful model. Very nice made, I wonder if I will ever reach your level.
I am sure you will :-)
Ash nazg durbatuluk, ash nazg gimbatul,
Ash nazg thrakatuluk, agh burzum-ishi krimpatul.

Offline lcarroll

  • Administrator
  • Hero Member
  • ******
  • Posts: 7892
Re: Nieuport 17C1 - Emile Paumier (1/32, Copper State Models)
« Reply #14 on: October 23, 2020, 11:24:19 PM »
Beautiful job Prze, the finish is (as always) exceptionally clean and "crisp". Another beautiful model to join all of your others, congratulations!
Cheers,
Lance