Author Topic: Don't get PUSHY with me ! (Read 32335 times)

RAGIII · « **Reply #450 on:** July 26, 2022, 01:57:21 AM »

Quote from: FAf on July 26, 2022, 01:51:57 AM

Can't spot the problem... and they seem awfully small, but think of how much life and interest they will add to your beautiful model!
/F

I agree with Fredrik! The wing rigging looks Awesome!
RAGIII

KiwiZac · « **Reply #451 on:** July 26, 2022, 05:44:33 AM »

I see no issues from here...but then I swapped fore and aft struts on my Wingnut Wings Pup

lone modeller · « **Reply #452 on:** July 26, 2022, 06:47:58 AM »

Looking very good Alexis. You are demonstrating an important fact: pushers are perfectly viable models to make! We just need a few more modellers to make them....

Stephen.

Alexis · « **Reply #453 on:** July 31, 2022, 08:33:57 PM »

I missed for of the turn buckle things on the lower right hand side outer bay on the double wires .

Thanks a bunch guys , adventures continue with the rigging . Engine bay area is done , booms are fixed in place . This are a major issue and still don't fit right . Even though they are same length , the mounting locals on the wings aren't and toss's one hell of a wrap which rigging will not fix . So some had to be trimmed and still not good but better to the point I'm moving on . Might be able to get more of the twist removed once the wires are finally Tension up . The wires pass throw the struts . Rigging on the tail is done as well , I used left over PE parts from Rodens 1/48 Strutter for part of the hard ware mounting brackets .

Alexis

Alexis · « **Reply #454 on:** July 31, 2022, 08:34:36 PM »

Alexis · « **Reply #455 on:** July 31, 2022, 08:35:06 PM »

Alexis · « **Reply #456 on:** July 31, 2022, 08:35:38 PM »

Alexis · « **Reply #457 on:** July 31, 2022, 08:36:10 PM »

Alexis · « **Reply #458 on:** July 31, 2022, 08:36:35 PM »

RAGIII · « **Reply #459 on:** August 01, 2022, 12:22:00 AM »

I can't see a warp Alexis! Just a beautifully built, painted, and rigged DH2

RAGIII

KiwiZac · « **Reply #460 on:** August 01, 2022, 09:24:15 AM »

Quote from: RAGIII on August 01, 2022, 12:22:00 AM

I can't see a warp Alexis! Just a beautifully built, painted, and rigged DH2
RAGIII

Ditto!

DaveB · « **Reply #461 on:** August 02, 2022, 02:34:31 AM »

Lovely, Alexis -

You obviously got one better fitting the taiplane onto the booms than I did ..............

Regards

Dave

Stuart Malone · « **Reply #462 on:** August 02, 2022, 04:28:05 AM »

The turnbuckles look great! You are being very meticulous on this and the results are showing. It's gonna be a stunner!

Stuart

Brad Cancian · « **Reply #463 on:** August 02, 2022, 03:52:50 PM »

Top shelf stuff Alexis - your hard work is paying off!

Cheers,

BC

Alexis · « **Reply #464 on:** August 03, 2022, 10:53:58 AM »

Thank you very much guys for the positive feed back . I might have a bit more progress to share tomorrow if I can find time to spend in front of the bench .

My time seems to be less and less with work and a promotion on a support site , I manage 30 different groups so my plate is full .

Again thanks for the continuing support and following along

Alexis , still awesome and sexy as hell !