Author Topic: New Austrian A/C kit in production at WNW!  (Read 16181 times)

Offline rhwinter

  • Hero Member
  • *****
  • Posts: 1145
Re: New Austrian A/C kit in production at WNW!
« Reply #45 on: August 30, 2019, 03:33:37 PM »
Ah, what a pity! But I guess, CSM will „survive“ WnW's Starstrutter as they have their great resin figures and their beautiful 1/35th scale range of vehicles.

Offline Jeff K

  • Hero Member
  • *****
  • Posts: 702
Re: New Austrian A/C kit in production at WNW!
« Reply #46 on: August 30, 2019, 05:18:42 PM »
as long as it's up to the quality of the Nieuports i'll go with the CSM one, and probably 2 or 3. if CSM's release pattern is similar to the Nieuport they'll cover any significant variants and have the 'crowd pleaser' obvious choices for markings (i'm looking to build planes for Benno Fiala von Fernbrugg and Josef Kiss, possibly more).

if the WNW kit is a significantly different variant to what's available from CSM, or has different markings, i may get a WNW one.

there's some small hope it could be a C.I, but the landing gear looks more like a D.I


Offline drdave

  • Hero Member
  • *****
  • Posts: 1036
Re: New Austrian A/C kit in production at WNW!
« Reply #47 on: August 30, 2019, 06:57:51 PM »
I wonder if CSM will proceed, once WNW make it official. There is simply not the market for what? 4000 kits of these in the world.
It's a niche market and CSM have to feed the kids.

« Last Edit: August 30, 2019, 08:04:26 PM by Drdave »

Offline Jeff K

  • Hero Member
  • *****
  • Posts: 702
Re: New Austrian A/C kit in production at WNW!
« Reply #48 on: August 30, 2019, 07:31:57 PM »
I don't think CSM will proceed, once WNW make it official. There is simply not the market for what? 4000 kits of these in the world.
It's a niche market and CSM have to feed the kids.

Perhaps the Caudron is going upscale?

that's very much not the impression i get from CSM's Facebook page:

"Great news for the model community out there - We`ve been working on several 1/32 projects and the one that was finished recently is a Hansa Brandenburg D.I. Should I mention that there are some 1/35 models in development as well? Anyway, 1/32 kit is planned for early 2020."

Offline drdave

  • Hero Member
  • *****
  • Posts: 1036
Re: New Austrian A/C kit in production at WNW!
« Reply #49 on: August 30, 2019, 08:05:09 PM »
I really hope so, I love the stuff CSM are doing. I want both companies to thrive

Offline Borsos

  • Hero Member
  • *****
  • Posts: 3609
Re: New Austrian A/C kit in production at WNW!
« Reply #50 on: August 30, 2019, 09:18:45 PM »
Great News from CSM! I will definitely buy the CSM Starstrutter, if it’s the only existing kit then or not. I keep my fingers crossed for many other 1/32 or 1/35 releases from CSM.
Andreas
"Deux armées aux prises, c'est une grande armée qui se suicide."
Barbusse.
"Ein Berg in Deutschland kann doch einen Berg in Frankreich nicht beleidigen. Oder ein Fluß oder ein Wald oder ein Weizenfeld."
Remarque.

Offline Jeff K

  • Hero Member
  • *****
  • Posts: 702
Re: New Austrian A/C kit in production at WNW!
« Reply #51 on: August 30, 2019, 10:36:41 PM »
...I keep my fingers crossed for many other 1/32 or 1/35 releases from CSM.
Andreas

"We`ve been working on several 1/32 projects"

"hould I mention that there are some 1/35 models in development as well? "

i'm optimistic.

Offline Borsos

  • Hero Member
  • *****
  • Posts: 3609
Re: New Austrian A/C kit in production at WNW!
« Reply #52 on: August 30, 2019, 11:10:06 PM »
...I keep my fingers crossed for many other 1/32 or 1/35 releases from CSM.
Andreas

"We`ve been working on several 1/32 projects"

"hould I mention that there are some 1/35 models in development as well? "

i'm optimistic.

I read somewhere that there‘s a Romfeld armoured car in the making at CSM.
"Deux armées aux prises, c'est une grande armée qui se suicide."
Barbusse.
"Ein Berg in Deutschland kann doch einen Berg in Frankreich nicht beleidigen. Oder ein Fluß oder ein Wald oder ein Weizenfeld."
Remarque.

Offline Juan

  • Hero Member
  • *****
  • Posts: 2474
  • All gave some, some gave all.
Re: New Austrian A/C kit in production at WNW!
« Reply #53 on: August 31, 2019, 01:19:24 AM »

I read somewhere that there‘s a Romfeld armoured car in the making at CSM.



Listed on CSM site as pre-order

Offline Jeff K

  • Hero Member
  • *****
  • Posts: 702
Re: New Austrian A/C kit in production at WNW!
« Reply #54 on: August 31, 2019, 03:01:11 AM »
looks like the Nieuports were a big enough win that they've now got several projects simmering.

maybe the armored cars did well too but it's not my thing so i've not been watching inventory on the CSM sites.

Offline oldalbie

  • Full Member
  • ***
  • Posts: 185
Re: New Austrian A/C kit in production at WNW!
« Reply #55 on: August 31, 2019, 04:05:05 AM »
Well, it's not my hoped for Berg D. I, but hope springs eternal as they say.

Offline Borsos

  • Hero Member
  • *****
  • Posts: 3609
Re: New Austrian A/C kit in production at WNW!
« Reply #56 on: August 31, 2019, 04:15:46 AM »
Great News from CSM! I will definitely buy the CSM Starstrutter, if it’s the only existing kit then or not. I keep my fingers crossed for many other 1/32 or 1/35 releases from CSM.
Andreas

Somehow I messed up the topics here, I beg your pardon: This is about the new Austro-Hungarian AC prepaired by WNW which of course is also very welcome. I hope that it‘s going to be a two-seater and not the same type CSM is prepairing at the moment.
Andreas
"Deux armées aux prises, c'est une grande armée qui se suicide."
Barbusse.
"Ein Berg in Deutschland kann doch einen Berg in Frankreich nicht beleidigen. Oder ein Fluß oder ein Wald oder ein Weizenfeld."
Remarque.

Offline osterkamp

  • Jr. Member
  • **
  • Posts: 54
Re: New Austrian A/C kit in production at WNW!
« Reply #57 on: August 31, 2019, 08:04:09 AM »
Maybe I'm wrong, but think it's going to be a two-seater ... ;) ;) ;) on the WNW CAD the exhaust outlets are on the left side of the engine, but for a Hansabrandenburg DI the exhausts should be on the right side !!!! so who knows a series of Hansa brandenburg C1 may be coming  :D :D
regards,
Fred

Offline eclarson

  • Hero Member
  • *****
  • Posts: 611
Re: New Austrian A/C kit in production at WNW!
« Reply #58 on: August 31, 2019, 08:31:46 AM »
Maybe I'm wrong, but think it's going to be a two-seater ... ;) ;) ;) on the WNW CAD the exhaust outlets are on the left side of the engine, but for a Hansabrandenburg DI the exhausts should be on the right side !!!! so who knows a series of Hansa brandenburg C1 may be coming  :D :D
regards,
Fred

I believe what you're thinking are the exhaust outlets on the left side are actually the manifold intakes.  Judging from the more recently added undercarriage CAD image I still think it's a D.I.

Cheers,
Eric

Offline Dave Brewer

  • Hero Member
  • *****
  • Posts: 521
Re: New Austrian A/C kit in production at WNW!
« Reply #59 on: August 31, 2019, 08:58:49 AM »
I have this vision of the WNW crew sitting around a table and giggling like schoolgirls about which picture to release next to tease us with.I hope it's a 2 seater when we eventually find out.