Steven, I hope to be able to show that it can be done, but it is all pretty tiny and requires careful handling.
Some additions to the cockpit:
Bo designed some niceties. Here you see the cockpit floor, the rudder pedals, three parts to build the compass and the top of the control column.
The challenges here is the top of the control column. Don't cut anything from it's 3D base, but first drill a small 0,25mm hole in the handles and bend and fit some 0,25mm wire inside. In doing you also glue this wire unto the middle part which is the button for the MG's and underneath connects the handles to the column. Do that all when these three parts are still connected to the base and after the glue has cured carefully cut the parts off.
It all requires a lot of painting still, but here you get the picture how it all fits in the cockpit:
I couldn't resist trying to fit some other parts to get an idea about the finished model.
If I can manage to make control wires running through the fuselage at least the rudder will be controlled from the cockpit. The control stick cannot move the elevator as it doesn't move to the front and back. In theory controlling the ailerons is possible.
regards,
Ivo