Author Topic: 0/400 release  (Read 4727 times)

Online Mike Norris

  • Hero Member
  • *****
  • Posts: 2202
  • RAF Old and Bold
    • Mikes WW1 Aircraft Models
0/400 release
« on: November 01, 2018, 07:31:35 PM »
Hi all,
Copper State Models has a Handley-Page 0/400 in 1:48th scale being release hopefully by the end of the year.

K1025 - 1/48 scale RESIN - Handley Page 0/400 Bomber

200 EUR price tag
1 kg of resin parts
2 meters of wire was used for struts. Another 1 meter for wings

Pre-order will be open at Scale Models World 2019 (Telford, UK)

https://www.facebook.com/copperstatemodels/

Mike


Retired - 27 years RAF service then 20 years Military Aerospace Technical Author/editor.

Offline Ryan

  • Hero Member
  • *****
  • Posts: 615
Re: 0/400 release
« Reply #1 on: November 01, 2018, 10:55:47 PM »
WOW, not my scale currently but I could be swayed.

Great news.

Ryan
In Progress: 1/32 Albatross DV (Richthofen); 1/32 Morane Saulnier Type N; 1/32 Sopwith Pup
Upcoming: Not sure!

Offline Jeff K

  • Hero Member
  • *****
  • Posts: 702
Re: 0/400 release
« Reply #2 on: November 02, 2018, 01:14:30 PM »
i can't be swayed to do 1/48... but i'm glad they're following through on this kit.

magnificent things should exist, even if they're 1/48...

Offline Berman

  • Sr. Member
  • ****
  • Posts: 478
Re: 0/400 release
« Reply #3 on: November 02, 2018, 11:21:24 PM »
This will be fantastic. Hope it has details on the under wing tiger stripe camouflage version. Definitely getting this kit.

Offline mike in calif

  • Full Member
  • ***
  • Posts: 195
Re: 0/400 release
« Reply #4 on: November 04, 2018, 02:24:15 AM »
Agree. A Sopwith Tabloid/ Baby would suit me just fine. A short seaplane, and Albie W4 would be good as well. Let's have a seaplane Christmas.
I still want a Brit bomber to go with the German bombers.

Offline Ryan

  • Hero Member
  • *****
  • Posts: 615
Re: 0/400 release
« Reply #5 on: November 12, 2018, 11:14:29 AM »
WOW, not my scale currently but I could be swayed.

Great news.

Ryan

It seems I do not need to be swayed anymore.
In Progress: 1/32 Albatross DV (Richthofen); 1/32 Morane Saulnier Type N; 1/32 Sopwith Pup
Upcoming: Not sure!

Offline Jeff K

  • Hero Member
  • *****
  • Posts: 702
Re: 0/400 release
« Reply #6 on: November 12, 2018, 06:59:32 PM »
WOW, not my scale currently but I could be swayed.

Great news.

Ryan

It seems I do not need to be swayed anymore.

yep. sorted.

Offline Ryan

  • Hero Member
  • *****
  • Posts: 615
Re: 0/400 release
« Reply #7 on: November 12, 2018, 11:03:23 PM »
WOW, not my scale currently but I could be swayed.

Great news.

Ryan

It seems I do not need to be swayed anymore.

yep. sorted.

My pre-order finger is ready for action.
In Progress: 1/32 Albatross DV (Richthofen); 1/32 Morane Saulnier Type N; 1/32 Sopwith Pup
Upcoming: Not sure!

Offline JimF

  • Newbie
  • *
  • Posts: 48
Re: 0/400 release
« Reply #8 on: November 13, 2018, 02:19:50 AM »
Same here, Ryan.

I'm too bloody far from Telford to do it there LOL

Jim F

Offline Jeff K

  • Hero Member
  • *****
  • Posts: 702
Re: 0/400 release
« Reply #9 on: November 13, 2018, 05:38:42 AM »
WOW, not my scale currently but I could be swayed.

Great news.

Ryan

It seems I do not need to be swayed anymore.

yep. sorted.

My pre-order finger is ready for action.
i'm already primed to accept unwanted overtime. and hide this stuff from My Intended. "baby, baby. you got a rock right? business is what it is. we're not there yet with money for the wedding. what? no. not much spent on little airplanes. "

whoever says relationships are built on trust hasn't been in one ;)

Offline Ryan

  • Hero Member
  • *****
  • Posts: 615
Re: 0/400 release
« Reply #10 on: November 13, 2018, 06:19:37 AM »
My model shack is out back and easily accessed around the house.

No need to take (large) packages through the home.....

Ryan
In Progress: 1/32 Albatross DV (Richthofen); 1/32 Morane Saulnier Type N; 1/32 Sopwith Pup
Upcoming: Not sure!

Offline JimF

  • Newbie
  • *
  • Posts: 48
Re: 0/400 release
« Reply #11 on: November 13, 2018, 07:52:29 PM »
I'm glad I am a member of the "we few, we happy few" :)

All my kits are in plain site in our shared hobby room (granted, I use about 80% of the room).

She is also pretty much aware of the costs, she bought and paid for the WnW Felixstowe as a B'day present for me this past summer.

Ya just gotta find the right keeper, is all, boys! LOL

Jim F

Offline Europapete

  • Sr. Member
  • ****
  • Posts: 433
Re: 0/400 release
« Reply #12 on: November 17, 2018, 09:43:18 AM »
I totally agree, Darlene has bought me most of the WNW's I have.

Online janh

  • Full Member
  • ***
  • Posts: 147
Re: 0/400 release
« Reply #13 on: December 20, 2018, 06:14:00 PM »
today some cad exploded views are available @ WNW

Online janh

  • Full Member
  • ***
  • Posts: 147
Re: 0/400 release
« Reply #14 on: May 09, 2019, 07:07:44 PM »
news from Japan