« previous next »
Pages: 1 2 [3] 4 5 ... 22

Author Topic: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch  (Read 61667 times)

Offline GazzaS

  • Hero Member
  • *****
  • Posts: 1193
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #30 on: April 12, 2018, 02:30:05 PM »
Thos wings came out very sweetly!

Gaz
Logged
There are only two states to be in:  Queensland and blotto.

Offline ondra

  • Hero Member
  • *****
  • Posts: 946
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #31 on: April 14, 2018, 12:30:07 AM »
Many thanks for following the build and leaving such nice comments, Gregory and Gazza, glad to have you on board!

Today I started working on the interior. I made a drawing of the cockpit sides in scale:



Then I fixated the drawing to a piece of aluminium with Tamiya tape, to keep it stable and prevent it from crooking:




Afterwards I started glueing evergreen profiles cut to the desired length to the respective spots with small drops of CA. Then I glued the joints with Tamiya extra thin to weld them together. At the end I got this:




Now the parts have been soaked in debonder, which should dissolve the CA and loosen the parts from the paper. Will see tomorrow, how it works out.

Cheers

Ondra
Logged

Offline krow113

  • Sr. Member
  • ****
  • Posts: 458
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #32 on: April 14, 2018, 01:25:42 AM »
Magnificently tiny.
Logged

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 19693
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #33 on: April 14, 2018, 02:16:10 AM »
The wings are looking awesome Ondra! Your method for creating the side frames is extremely creative!
RAGIII
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline ondra

  • Hero Member
  • *****
  • Posts: 946
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #34 on: April 14, 2018, 05:10:42 PM »
Many thanks for your support, krow and Rick!

I am glad to say the method with dissolving CA has worked, the parts separated from the paper without any problem.

Today I made a fit test using white glue and for the first attempt it is acceptable.




Next up are some parts for the cockpit (seat, gas tank, dashboard etc.)

Cheers

Ondra
Logged

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 19693
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #35 on: April 14, 2018, 10:06:59 PM »
Looks terrific Ondra!
RAGIII
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline ondra

  • Hero Member
  • *****
  • Posts: 946
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #36 on: April 14, 2018, 10:31:27 PM »
Many thanks, dear friend, I really appreciate you following the build!

I want to make sure that my drawings are correct and that all interior parts will fit in, therefore I started working on the main components.

First is the seat, in Camel's case wicker seat. I decided to use a very fine mesh I got years ago from a friend of mine.



Assembly was not as easy as I would have hoped, but eventually I got an acceptable result.




This what the seat and tank look like in the interior (not glued), so far so good.




Cheers

Ondra
« Last Edit: April 15, 2018, 12:15:58 AM by ondra »
Logged

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 19693
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #37 on: April 14, 2018, 10:35:49 PM »
More AMAZING with each update Ondra! That seat is incredible!!
RAGIII
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Online Borsos

  • Hero Member
  • *****
  • Posts: 3595
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #38 on: April 15, 2018, 02:01:07 AM »
Woooof. Simply amazing what you are doing, Ondra! You are surprising us with every post.
Andreas
Logged
"Deux armées aux prises, c'est une grande armée qui se suicide."
Barbusse.
"Ein Berg in Deutschland kann doch einen Berg in Frankreich nicht beleidigen. Oder ein Fluß oder ein Wald oder ein Weizenfeld."
Remarque.

Offline GazzaS

  • Hero Member
  • *****
  • Posts: 1193
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #39 on: April 15, 2018, 06:51:07 AM »
Even considering an interior in 1/144!  I'm totally blown away.  That wicker seat is beautiful!

Gaz
Logged
There are only two states to be in:  Queensland and blotto.

Offline Jeff K

  • Hero Member
  • *****
  • Posts: 702
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #40 on: April 15, 2018, 02:32:50 PM »
It's excellent progress on that 1/72 Camel. However, what I really want to know... Are your hands really that huge, or did you Photoshop that???
Logged

Offline Iancshippee

  • Full Member
  • ***
  • Posts: 238
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #41 on: April 15, 2018, 10:17:39 PM »
Ondra, those side frames and the seat are truly astounding!
Logged

Offline Manni

  • Hero Member
  • *****
  • Posts: 1768
    • Der Militärmodellbauer
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #42 on: April 16, 2018, 03:27:38 PM »
Outstanding work, Ondra. The Seat is the best. I am always impressed, when you start a new build. Would love to see what you can do with a kit in lager scale. Probably it could fly.
Bye,
Manni
Logged
"Ich hab' da mal was vorbereitet.": Jean Pütz
"Warum noch mehr Bausätze?!?": meine Frau

Offline ondra

  • Hero Member
  • *****
  • Posts: 946
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #43 on: April 16, 2018, 10:30:30 PM »
Rick, Andreas, Gazza, Jeff, Ian and Manni, thank you very much for your nice comments and for following the build!

Today I was mainly playing around with small parts for the cockpit, I will add a few details to the machine guns and make the rudder pedals tomorrow. Today my hands are shaky already. :)








Cheers

Ondra
Logged

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 19693
Re: W. G. Barker's Sopwith F.1 Camel B6313 1/144 scratch
« Reply #44 on: April 16, 2018, 10:42:08 PM »
Have I ever said that your work is AMAZING  ;D You do things in 1/144th that I have trouble with in 1/32nd. Astonishing details Ondra!
RAGIII
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler
Pages: 1 2 [3] 4 5 ... 22
« previous next »