Darn, looking at the date on the last post, it has been 2 years since I broke the Pup. I guess that is enough pouting, the wife must be starting to rub off on me after 33 years.
I cleared the bench, slapped down a fresh sheet of white paper and laid out the parts. There is the closed up fuselage, the seat, the ammo chutes, the oil tank and the curved brace that goes between the top longerons and in front of the instrument panel.
The ammo chutes fitted in well and aligned properly as did the oil tank. A few judicious drops of CA and they were set, The fuselage sides had broken away from the little curved formers on the outside of the frame. A gentle pinch and a couple of drops of CA put that right.
Some more tweezer work and a few more drops of CA had the seat in place and the curves cross piece fixed back where it belongs.
The two year hiatus has not all been filled with the joys of flying and crashing RC models. I have read up some on building WnW kits and I now have a much better idea of how much I have to either re-learn or learn anew. So with chastened ego firmly in hand, I will try to get this Pup finished in a reasonable time frame.
sp