« previous next »
Pages: [1] 2 3 ... 5

Author Topic: Albatros D.III Oeffag 253 1/48 Eduard  (Read 9950 times)

Offline LukasTheLight

  • Hero Member
  • *****
  • Posts: 557
  • Addicted to Wingnuts...
Albatros D.III Oeffag 253 1/48 Eduard
« on: March 29, 2015, 05:36:30 AM »
Hello guys!!!

So here we are!!! I've been home almost a week and was rather busy (that would explain my poor performance with reading comments and so on), I built photobox (thanks goes to Bo for his great tutorial), I've been experimenting with oils and pencils on woodgrain(thanks to the rest for tutorials and inspiration) and decided that I need something to practise it... Oeffag won it because It should be rather quick(unfortunatelly I wont be staying on the same place for too long) and because practise makes it "perfect" for my WNW stash :D
Just an quick intro to what I've been doing... or what I started :)

 
photo above shows my 20dollar photobox with 15dollar Oeffag :)


It is such a lovely little kit... looks quite cute compare to the size of WNW :D

Cheerio
Lukas
Logged
"Those Magnificent Men In Their Flying Machines.
They Can Fly Upside Down With Their Feet In The Air.
They Don't Think of Danger. They Really Don't Care.
Newton Would Think He Had Made A Mistake."

Lukas

Offline radio

  • Hero Member
  • *****
  • Posts: 3952
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #1 on: March 29, 2015, 06:10:54 AM »
Nice beginning Lukas.
Martin
Logged

Offline uncletony

  • Hero Member
  • *****
  • Posts: 4384
    • Aircraft In Pixels
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #2 on: March 29, 2015, 08:17:44 AM »
Nice photo box and start!
Logged

Offline LukasTheLight

  • Hero Member
  • *****
  • Posts: 557
  • Addicted to Wingnuts...
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #3 on: April 09, 2015, 07:36:12 PM »
Hello guys!!!

So, here we go again... after lovely week in "sunny" London I was finally able to return in hot seat and get some stuff done. It is hard though as Im also working on my Aussie visa application and that need to be done properly...
Anyway, I finished seat, re-painted wood in cockpit - thanks to Hellboy and good point that Albatros wasnt made out of dark wood, thanks Hellboy ;) painted exhausts aka what can be achieved by combineing Bertl´s idea with my hands...







Im about to paint wings, so hopefully some pictures will be sooner than last time... using HGW decals for linen... I really wanted to use Aviattic but due to my funds limit they will have to wait for proper scale :D

Happy modelling!!!
Lukas
Logged
"Those Magnificent Men In Their Flying Machines.
They Can Fly Upside Down With Their Feet In The Air.
They Don't Think of Danger. They Really Don't Care.
Newton Would Think He Had Made A Mistake."

Lukas

Offline Des

  • Administrator
  • Hero Member
  • ******
  • Posts: 9325
    • ww1aircraftmodels.com
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #4 on: April 09, 2015, 08:45:25 PM »
You are making excellent progress with your build Lukas, you wood looks really good.

Des.
Logged
Late Founder of ww1aircraftmodels.com and forum.ww1aircraftmodels.com

Offline Alexis

  • Hero Member
  • *****
  • Posts: 8029
  • Love the self
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #5 on: April 09, 2015, 09:49:30 PM »
Following with interest  :)




Terri
Logged
Hurra ! , Ich Leben Noch
Body and life is a vessel we use to travel the planet . Femininity is the gift , The miracle comes from what we do with it .

Offline LukasTheLight

  • Hero Member
  • *****
  • Posts: 557
  • Addicted to Wingnuts...
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #6 on: April 09, 2015, 10:51:30 PM »
Thanks guys!!!

Des, wood could be better but at least I know what to do differently next time ;) Hopefully more to follow soon!!!

Lukas
Logged
"Those Magnificent Men In Their Flying Machines.
They Can Fly Upside Down With Their Feet In The Air.
They Don't Think of Danger. They Really Don't Care.
Newton Would Think He Had Made A Mistake."

Lukas

Offline BigBlue

  • Hero Member
  • *****
  • Posts: 640
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #7 on: April 09, 2015, 10:59:22 PM »
The wood looks great, as does the metal of the exhausts.  Nice work!

Chris
Logged

Offline coyotemagic

  • Hero Member
  • *****
  • Posts: 7710
  • "Here's to not buggering it up." -Winston Chuchill
    • My Models
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #8 on: April 10, 2015, 01:38:45 AM »
Great start, Lukas.  That seat and exhaust look fantastic.  This is a wonderful kit with no vices.  I've built two and have a few more in the stash, so I know you're gonna have a blast building it.
Cheers,
Bud 
Logged
"All men dream: but not equally. Those who dream in the dark recesses of the night awake in the day to find all was vanity. But the dreamers of day are dangerous men, for they may act their dreams with open eyes, and make it possible." -T. E. Lawrence

Offline radio

  • Hero Member
  • *****
  • Posts: 3952
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #9 on: April 10, 2015, 07:54:48 AM »
Lovely woodwork Lukas.
Martin
Logged

WarrenD

  • Guest
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #10 on: April 10, 2015, 09:41:29 AM »
Very nice!

Warren
Logged

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 19688
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #11 on: April 10, 2015, 03:43:10 PM »
Great looking wood! I am looking forward to your next update!
RAGIII
Logged
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline LukasTheLight

  • Hero Member
  • *****
  • Posts: 557
  • Addicted to Wingnuts...
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #12 on: April 14, 2015, 04:10:55 AM »
Hello guys!!!

Firstly, thank you for your warm comments and second Im ready with second batch of progress :) This time before closing fuselage (currently drying and closed already), Ive changed tone of wood by using brown filter(thanks to Hellboy again for advice :) ), dashboard will be on pictures of closed fuselage as I forotten about it... On engine I used 3 different techniques for Aluminium - Bertl style, using Uschi powder and polished aluminium from Alclad production :) Well... here we go!!!









It was lovely day... I have a propeller in progress and looking into attaching cowling tomorrow... also my Special Hobby Bristol M.1C arrived :)
Happy modelling and lovely evening!!!
Lukas
Logged
"Those Magnificent Men In Their Flying Machines.
They Can Fly Upside Down With Their Feet In The Air.
They Don't Think of Danger. They Really Don't Care.
Newton Would Think He Had Made A Mistake."

Lukas

Offline uncletony

  • Hero Member
  • *****
  • Posts: 4384
    • Aircraft In Pixels
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #13 on: April 14, 2015, 04:12:05 AM »
Beautiful!
Logged

Offline radio

  • Hero Member
  • *****
  • Posts: 3952
Re: Albatros D.III Oeffag 253 1/48 Eduard
« Reply #14 on: April 14, 2015, 05:24:46 AM »
Wounderful!
Martin
Logged
Pages: [1] 2 3 ... 5
« previous next »