Author Topic: Short 184, Aeroclub, 1:72 (Read 36612 times)

RAGIII · « **Reply #195 on:** December 14, 2015, 06:19:49 AM »

Outstanding work! This one is really going to be Brilliant!
RAGIII

Des · « **Reply #196 on:** December 14, 2015, 06:36:09 AM »

Superb Ian, many would easily be mistaken to think this was a much larger scale, excellent work.

Des.

PrzemoL · « **Reply #197 on:** December 14, 2015, 06:54:52 AM »

Great modelling, Ian. I can't wait to see it completed.

lcarroll · « **Reply #198 on:** December 14, 2015, 07:30:26 AM »

It's been a while since I checked in, Ian, you're doing wonders with this Build. It's already spectacular, I'm looking forward to the finished version.
Cheers,
Lance

TobyCoulson · « **Reply #199 on:** December 14, 2015, 05:10:09 PM »

That does look very good indeed.

Dirigible-Al · « **Reply #200 on:** December 15, 2015, 03:32:03 AM »

Wonderful job Ian
It is great to see it with one of the wings attached. Are they going to be folded when finished?
Alan.

IanB · « **Reply #201 on:** December 15, 2015, 08:23:25 AM »

Thanks for all the positive comments, they are much appreciated!

Al, the wing is only dry fitted to make sure that it does indeed line up with everything, and yes, they will be folded. That's what has caused all the headaches - trying to make sure that the wings actually match the fuselage/centre section and will mount correctly when done....looks like I've cracked it - at least on the right wings!

I finished off the structural rigging today, including the much dreaded outer bay with its very unusual crossed-over rigging, and tied-up landing wires - Very pleased with the result! The landing wires were done by adding one line top-to-bottom at the outer struts, then tying another line around them at a measured distance from the bottom (fixed) point. A dot of ca to secure the knot in the correct place, then the wires were tensioned, held in place with my little dolls-house pegs, and secured with CA. Seems to have worked so I'll use a similar technique for the aileron rigging.

Ian

Des · « **Reply #202 on:** December 15, 2015, 08:30:28 AM »

Beautiful job with the somewhat complex rigging Ian, these finishing touches really make the model come to life.

Des.

RAGIII · « **Reply #203 on:** December 15, 2015, 09:08:58 AM »

Beautiful rigging! You are getting close now to having this beauty finished

RAGIII

coyotemagic · « **Reply #204 on:** December 15, 2015, 12:42:20 PM »

Awesome work all 'round, Ian, especially that intricate rigging!
Cheers,
Bud

radio · « **Reply #205 on:** December 16, 2015, 01:41:40 AM »

Great rigging Ian.
Cheers
Martin

GAJouette · « **Reply #206 on:** December 16, 2015, 01:48:26 AM »

Ian,
Now that's some outstanding rigging my old friend. Well trained spider's ? Well Done.
Highest Regards,
Gregory Jouette

andonio64 · « **Reply #207 on:** December 16, 2015, 02:11:15 AM »

This is spider exploitation! Where is the poor arachnid you chained up to serve you?
Beware of the Spider Workers Trade Union!

...fantastic Ian!

IanB · « **Reply #208 on:** December 16, 2015, 08:42:13 AM »

He has more to worry about from my big feet...he's much safer working on the wings.....

Ian

IanB · « **Reply #209 on:** December 16, 2015, 09:31:21 AM »

I got a good start on the port wings today. They went together a hell of a lot quicker than the first side. I also got the struts painted and the incidence wires done. Hopefully I'll be able to finish most of the rest of the rigging tomorrow and start tidying up the top wings ready for the decals.

Ian