Author Topic: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII  (Read 7247 times)

Offline NigelR

  • Hero Member
  • *****
  • Posts: 2703
Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII
« on: August 01, 2025, 08:57:20 PM »
Here's the first stages of my first entry for the "Aces Mounts" Group Build. It's the Fokker DVII flown by Lothar von Richthofen which he described as his "lovely red bird". Ronny Bar produced a profile of this a while back showing the aircraft entirely overpainted in red, and this provoked some discussion on The Aerodrome. Bottom line is that the all-red scheme is definitely highly speculative but IMO it looks great and Aviattic produced a set of decals for this scheme which I will be using.

It is possible that this DVIIF is in the 4250/18 to 4449/18 series, as JGI received a batch from this series in the July/August timeframe which is when LvR was flying his "lovely red bird". There is a photo of him standing in front of a dark coloured DVIIF which has the cowling arrangement from this series, so that's good enough for me. This photo could be his "lovely red bird" but we don't know for sure.

This aircraft was not in service for long under LvR. He was known to have scored two victories in it but then crashed it on landing, damaging the wing. So weathering will be kept very subtle on this one. This will be a "quick" OOB build as I need a relaxing build after spending so long focused on my "Gassed" diorama......Let's hope it pans out that way.

I had already started this when the GB was announced so don't have any photos of the box and kit before it was started. But most of the interior parts and engine are done, so here's a few photos of where I am at:













 

Online DaddyO

  • Hero Member
  • *****
  • Posts: 1559
Re: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII
« Reply #1 on: August 01, 2025, 10:08:08 PM »
Lovely start Nigel. Quite looking forward to a red kite that wasn't flown by the better known brother  :)

Paul
There cannot be a crisis today, my schedule is full

Offline Jorgo

  • Hero Member
  • *****
  • Posts: 523
Re: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII
« Reply #2 on: August 02, 2025, 12:08:31 AM »
WOW! Excellent engine and weathered seat. I am looking forward to the next updates

Joerg

Offline FAf

  • Hero Member
  • *****
  • Posts: 1241
Re: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII
« Reply #3 on: August 02, 2025, 02:37:13 AM »
Looks great! Looking forward to more pictures

/Fredrik

Offline Dirigible-Al

  • Hero Member
  • *****
  • Posts: 1054
Re: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII
« Reply #4 on: August 02, 2025, 03:19:02 AM »
I too am looking forward to seeing it. I don't know what LVR's D.VII looks like and I'm not going to Google it, gives me another thing to look forward to.
Alan.
I heard that it all started when a bloke called Archie Duke shot an ostrich 'cause he was hungry!

Offline Brad Cancian

  • Administrator
  • Hero Member
  • ******
  • Posts: 1533
  • "This time I've got you, Red Baron!"
    • Brad's Models
Re: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII
« Reply #5 on: August 02, 2025, 07:08:12 AM »
Oh my Nigel, off to a cracking start there! Looking great! Nice choice of subject also :)

Cheers,

BC
Owner and Administrator
forum.ww1aircraftmodels.com


Offline gedmundson

  • Hero Member
  • *****
  • Posts: 1950
Re: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII
« Reply #7 on: August 03, 2025, 02:06:16 AM »
Excellent start to your build, Nigel and great to see something new from your bench. Looking forward to seeing your progress on this interesting subject. Decided to go with the red exhaust flange covers, eh  ;)
Cheers,
Gary

Offline Allan31

  • Hero Member
  • *****
  • Posts: 775
Re: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII
« Reply #8 on: August 04, 2025, 08:55:00 AM »
Great start Nigel, can you please give us scale and manufacturer? Of course it's 1/32.
Thanks,
Allan Buttrick

Youth, talent, hard work, and enthusiasm are no match for old age and treachery.

Offline NigelR

  • Hero Member
  • *****
  • Posts: 2703
Re: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVIIF (WNW 1/32)
« Reply #9 on: August 04, 2025, 07:25:31 PM »
Thanks everyone, there should be more progress shots later this week.

WOW! Excellent engine and weathered seat.
Thanks Joerg. I got a bit carried away trying some new techniques on the seat. Of course I then remembered this aircraft was only in service for a couple of weeks so the seat probably wouldn't be that scratched. But I decided to leave it that way.....

Decided to go with the red exhaust flange covers, eh  ;)
I ummed and aahed and decided to go red to add a bit of colour to the dull side of the engine...... ;) ;D

Great start Nigel, can you please give us scale and manufacturer? Of course it's 1/32.
Sorry Allan, I forgot there were scales other than 1/32....... ;D It's the Wingnut Wings Fokker DVIIF (in 1/32 of course). This is the Goering boxing they did and as I didn't want to do his machine I am using the nice set of Lothar von Richthofen decals that Aviattic produced for this kit.
« Last Edit: August 05, 2025, 06:07:29 PM by NigelR »

Offline Alexis

  • Hero Member
  • *****
  • Posts: 8352
  • Love the self
Re: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII
« Reply #10 on: August 05, 2025, 12:44:46 PM »
Nice work so far  :)


Alexis
Hurra ! , Ich Leben Noch
Body and life is a vessel we use to travel the planet . Femininity is the gift , The miracle comes from what we do with it .

Offline NigelR

  • Hero Member
  • *****
  • Posts: 2703
Re: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII
« Reply #11 on: August 06, 2025, 12:18:16 AM »
Thanks Alexis!

Here's a couple of shots of the completed interior. Most of the detail is now (of course) difficult to see.....





I had trouble with the etched seatbelts from the kit. These seemed flimsy and the buckle parts broke off when I bent them to shape. I didn't have any HGW seat belts to hand so I used some of the Kits-World 3D printed decal seatbelts. These aren't too bad IMO. Not my preferred solution but ok.

Offline Dirigible-Al

  • Hero Member
  • *****
  • Posts: 1054
Re: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII
« Reply #12 on: August 06, 2025, 12:42:42 AM »
Really good work on the interior. I wouldn't have known they weren't the original seatbelts, they look good to me.
Alan.
I heard that it all started when a bloke called Archie Duke shot an ostrich 'cause he was hungry!

Online DaddyO

  • Hero Member
  • *****
  • Posts: 1559
Re: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII
« Reply #13 on: August 06, 2025, 12:45:08 AM »
Cracking along with this one Nigel  8)

Seatbelts worked out well and I love the leather effect on the seat. Soon be time to close it up and start on the exterior (given teh lack of rigging on this one I'm expecting it to be wrapped up by the weekend  ;D ;)
There cannot be a crisis today, my schedule is full

Offline gedmundson

  • Hero Member
  • *****
  • Posts: 1950
Re: Aces Mounts 2025 GB - Lothar von Richthofen Fokker DVII
« Reply #14 on: August 08, 2025, 02:45:00 AM »
Nice progress, Nigel. So much work goes into these cockpits and so little seen afterward - but that's the fun of it. Having built a couple of the WnW D.VII kits myself, I know that joining the fuselage halves can be tricky because of the tight tolerances around the cockpit framing (I'm sure you've heard of this!).
Cheers,
Gary