Some more work on resin preparations. Wing and stabilizer struts required multiple sessions of filling and sanding - the white spots indicate the affected zones
One of the front struts had a too short thinner section - it had to be corrected with razor and sanding paper - now they are identical and fitting to the scale drawings. Cleaning them I removed the raised details of tapes used to fix the Pitot tube pipe to one of those struts - they will be redone using selfadhesive tape.
Furthermore, the test fitting of wings struts and fuselage indicated that the wing sits too high over the fuselage and the cabane struts fell too short. But further measurments with the scale drawings showed that the problem was in too small spacing of the wing mount points for the main struts. The holes which were already prepared for the struts had to be filled and the new correct locations more off the fuselage are now traced - they will be drilled when the filled old places are sanded... Definitely, more to come soon...
And the cabane-outer wing panels joint is finally done.
