Author Topic: Does anyone know of a product to make rib stitching/tapes in 1/32 scale?  (Read 2589 times)

Offline Jamo

  • Hero Member
  • *****
  • Posts: 1115
  • Wellington, NZ
    • My Smugmug album
HGW make something suitable but it's in 1/48 scale

Cheers
James
Happy Modelling
James Fahey

Check out my massive photo collection here: https://jamesfahey.smugmug.com/

Offline Jamo

  • Hero Member
  • *****
  • Posts: 1115
  • Wellington, NZ
    • My Smugmug album
Re: Does anyone know of a product to make rib stitching/tapes in 1/32 scale?
« Reply #1 on: December 04, 2018, 01:33:38 PM »
No I want something raised that looks like stitching not just a tape of fabric
Happy Modelling
James Fahey

Check out my massive photo collection here: https://jamesfahey.smugmug.com/

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 18793
Re: Does anyone know of a product to make rib stitching/tapes in 1/32 scale?
« Reply #2 on: December 04, 2018, 01:38:04 PM »
Archer Transfers Makes some. Somewhat costly but they are well done. Several variants per sheet but would take several to do a larger aircraft.
RAGIII

PS: Transfers with a raised (resin?) imbedded. Certainly 3 dimensional!


http://www.archertransfers.com/
« Last Edit: December 04, 2018, 01:42:35 PM by RAGIII »
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline Jamo

  • Hero Member
  • *****
  • Posts: 1115
  • Wellington, NZ
    • My Smugmug album
Re: Does anyone know of a product to make rib stitching/tapes in 1/32 scale?
« Reply #3 on: December 04, 2018, 01:46:50 PM »
Thanks Rick - its for the old Matchbox Tiger Moth
Happy Modelling
James Fahey

Check out my massive photo collection here: https://jamesfahey.smugmug.com/

Bughunter

  • Guest
Re: Does anyone know of a product to make rib stitching/tapes in 1/32 scale?
« Reply #4 on: December 05, 2018, 06:00:17 AM »
There were some PE available from Eduard, but I think some are out of production right now.
I found some on ebay.

May be the are a bit big, I have used 1/72 on my 1/48 models, so may be the 1/48 will fit to 1/32 models.

Stitching:
https://www.eduard.com/store/index.php?cl=search&searchparam=stitching

Lacing:
https://www.eduard.com/store/index.php?cl=search&searchparam=lacing

Please see the nice PDF manuals for examples, how it looks like and where to use (mostly fuselage).

Cheers,
Frank

Offline Jamo

  • Hero Member
  • *****
  • Posts: 1115
  • Wellington, NZ
    • My Smugmug album
Re: Does anyone know of a product to make rib stitching/tapes in 1/32 scale?
« Reply #5 on: December 05, 2018, 09:01:28 AM »
Thanks Frank
Eduard's PE item look they are meant to represent joins of fabric to metal or fabric to fabric on fuselages than fabric to ribs on the wings. Here is a photo which shows the stitching under the fabric

Happy Modelling
James Fahey

Check out my massive photo collection here: https://jamesfahey.smugmug.com/

Offline RAGIII

  • Hero Member
  • *****
  • Posts: 18793
Re: Does anyone know of a product to make rib stitching/tapes in 1/32 scale?
« Reply #6 on: December 07, 2018, 10:32:32 AM »
Direct link to the Archer Rib Stitching sheet:

http://www.archertransfers.com/AR88044.html
RAGIII
"A man has to know his limitations": Harry Callahan

"Don't slop it on" Lynda Geisler

Offline GAJouette

  • Hero Member
  • *****
  • Posts: 3579
  • " Beware of the Spanish Inquisition"
Re: Does anyone know of a product to make rib stitching/tapes in 1/32 scale?
« Reply #7 on: December 08, 2018, 04:31:23 AM »
  James,
You might check with Richard at Aviattic my old friend. He was kind enough to supply me with PE rib tapes for my SE-5 conversion project earlier. These Aviattic rib tapes I've used really are a major improvement for the Roden wings. I'll post photos on my Conversion thread soon,so you can see the results for yourself.
Highest Regards,
Gregory Jouette

MERRY CHRISTMAS TO YOU AND YOURS
" What Me Worry"

Offline Brad Fallen

  • Newbie
  • *
  • Posts: 21
Re: Does anyone know of a product to make rib stitching/tapes in 1/32 scale?
« Reply #8 on: December 08, 2018, 09:38:36 AM »
As suggested earlier - HGW's 1/48 rib tapes are the go. They are slightly over scale ang look just right on a 1/32 model. In fact, I used them on my 1/28 Revell Dr.1 and they looked great - I don't have pics to hand as I'm travelling,  it will post some later. They go on brilliantly, are robust and look excellent under paint. Cheers Brad

Offline Jamo

  • Hero Member
  • *****
  • Posts: 1115
  • Wellington, NZ
    • My Smugmug album
Re: Does anyone know of a product to make rib stitching/tapes in 1/32 scale?
« Reply #9 on: December 08, 2018, 03:06:52 PM »
Hi Brad. I need the shape of the stitching not just a tape, do the HGW ones have this?
Happy Modelling
James Fahey

Check out my massive photo collection here: https://jamesfahey.smugmug.com/

Dekenba1

  • Guest
Re: Does anyone know of a product to make rib stitching/tapes in 1/32 scale?
« Reply #10 on: December 09, 2018, 09:30:30 PM »
I tend to use RB Productions Rib Stitching strips:

http://www.radubstore.com/index.php?main_page=product_info&cPath=77_116&products_id=694&zenid=49fa243de0ed09d4ee669079cca17be4



At 1/32, it does the job, for me, although from what I understand, you may want detail.

Offline Jamo

  • Hero Member
  • *****
  • Posts: 1115
  • Wellington, NZ
    • My Smugmug album
Re: Does anyone know of a product to make rib stitching/tapes in 1/32 scale?
« Reply #11 on: December 10, 2018, 02:04:28 PM »
That looks quite good, thanks!
Happy Modelling
James Fahey

Check out my massive photo collection here: https://jamesfahey.smugmug.com/