Hi all,
Some progress on the model.
Primed with Mr. Surfacer Black 1500.
Underside and top surface camouflage painted with mixed Tamiya paints to achieve the colour shades required.
The canopies were masked for painting using 1.0 mm wide tape and masking fluid.
I did buy the 1manArmy laser cut masking set but didn't use it in the end.
This model represent the aircraft after it was moved to another unit, where the undersides were brush re-painted.
All off the underside stencil markings were covered with the paint.
So the kit supplied decals were used, as only the fuselage fastener masks could have been used from the 1manArmy set.
The next step is to clear coat the model before adding weathering,
Mike
