Hi all,
A few updates on the build.
The upper wing is fitted and, as expected when using the kit supplied struts, there were problems.
On test fitting the upper wing onto the interplane and cabane struts, I found the cabane struts did not reach outboard enough to contact their attachment lugs on the underside of the wing.
This necessitated drilling out the interplane locating holes in the upper wing enough to allow the struts to insert deeper into the wing.
This reduced the distance between the wings enough for the cabane struts to fit correctly.
I've also fitted and braced the landing gear.
Also fitted are the twin aileron control wires from the cockpit to the underside of the upper wing.
NOTE: The struts look squared in the photographs, but they are in fact aero shaped.
Now it's onto the completing the tail unit,
Mike
