forum.ww1aircraftmodels.com
WW1 Aircraft Modeling => Under Construction => Topic started by: Adam on September 05, 2012, 05:47:22 AM
-
I would like to show my first building in scale 1:32 mode, it is Rodens Fokker Dr.1.
I’m building it for testing such big scale for me.
I found information in internet that it is good for beginners, so I bought this model, mask and PE parts.
If my test will be successful I’m planning to do Rodens 1:32 scale Nieuport 24 bis of course flown by Lt. Gilewicz from soviet army and Polish service than I will describe fantastic story of this pilot and his plane.
All what I have to build Fokker Dr.1:
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC02093.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC02094.jpg)
I’m waiting for delivery Vectors Oberursel motor.
I’m planning to do Lt. Hermann Beckers plane from 12 Jasta.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_SB_profile21.jpg)
My production began 1 August, so I’m showing all was is done to this day.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC02101.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC02103.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC02104.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC02110.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC02114.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC00603.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01172.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01174.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01186.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC02104.jpg)
Adam.
-
Adam,
Outstanding first progress my friend. Love the additional internal rigging you added and your wood work. Looking forward to seeing more and later on that wonderful Nieuport 24 bis.
Highest Regards,
Gregory Jouette
-
Truly brilliant start, Adam. Really looking forward to watching this build.
Cheers,
Bud
-
You have started off very well, what you have done so far is excellent, the frame and bracing wires are well done.
Des.
-
I really like the Dr.I, so I'll be eyeballing with great interest.
-
Very nice Adam, this kit is on my list, so I am watching with great interest!
-
Nice start on my favourite!!!! My only question is - whats the blue card stock being used for?
Steve
-
Hello Adam,
Nice to see you here :)
regards
K
-
Adam,
Looking very nice indeed. I built this one last year, a very nice kit to work with. I got into a little trouble with the interior frame however, and had to do a lot of "shaving" to get the mid wing on properly, my frame was built just slightly too high above the side panels of the fuselage. Other then that a really enjoyable project. Do lots of test fitting as you go and all will be fine.
Looking forward to more photos.
Cheers,
Lance :)
-
Thank you for yours nice opinions my friends. :)
Steve, this blue card isn’t any special material, it is overdue “EU travel health insurance”. I needed some plastic plate for pilots seat cushion and it was close at hand.
Adam.
-
Great progress so far Adam, very nice work.
Andrew
-
Adam, it's a wonderful WIP!
I love the internal rigging (as gregory already said) but the most interesting feature is the way you transformed the panel on the back of the seat!
did you use electric wire to simulate the lacing?
Antonio
-
Adam, it's a wonderful WIP!
I love the internal rigging (as gregory already said) but the most interesting feature is the way you transformed the panel on the back of the seat!
did you use electric wire to simulate the lacing?
Antonio
Antonio.
I removed cener of this part.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC02101.jpg)
and I replaced it by PE part from PART ( I know that you are using PE parts from PART in yours SPAD VII ;D)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC02114.jpg)
Adam.
-
Next small step for me. :)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01192.jpg)
Adam.
-
Very nice Adam. I hope to build one of these one day. I'm looking forward to seeing more of your progress.
Warren
-
Beautiful job on the cockpit, Adam. Love what you did to the seat.
Cheers,
Bud
-
I removed cener of this part.
and I replaced it by PE part from PART ( I know that you are using PE parts from PART in yours SPAD VII ;D)
Adam.
Thanks for the reply Adam, yes I know PART PE, and I like them a lot and always use them on my models.
So the back panel of the seat place comes as PE already with the strings on it?
Antonio
-
I removed cener of this part.
and I replaced it by PE part from PART ( I know that you are using PE parts from PART in yours SPAD VII ;D)
Adam.
Thanks for the reply Adam, yes I know PART PE, and I like them a lot and always use them on my models.
So the back panel of the seat place comes as PE already with the strings on it?
Antonio
YES
Adam.
-
Interior of the fuselage is almost ready.
Control column.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01196.jpg)
Compass was tilted parallelly to the ground because original models compass was parallel to fuselage axis.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01202.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01248.jpg)
On the right side of fuselage is oli level indicator and altimeter, both was made by me.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01250.jpg)
I modified a little fuel and oil tank making hole for oil inlet of course on the upper cover was made additional hole.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01210.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01212.jpg)
Some pictures of cockpit.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01247.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01245.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01244.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01240.jpg)
On pictures showing cockpit isn't showing hand fuel pomp, but Rodens model have it, so I don’t know, what to do with this pomp?
Adam.
-
Beautiful work Adam!
-
Outstanding work on the cockpit Adam.
Des.
-
Adam,
It just keeps getting better and better. Outstanding detail and work; I may have to do another myself, Lothar's yellow is looming due to the inspiration you've provided.
Cheers,
Lance
-
Lance.
I choose Backers because black, white checker painted on his plane looks like polish checker painted on our planes, but colors are different.
Adam.
-
Adam,
The "checkers" are not insignificant to me; the legacy of the Kosciuszko Squadron and their incredible contribution to the success of the Battle of Britain and indeed the entire conflict is a proud one, and I can understand why you'd tend towards the "checkers" scheme. I also like the scheme you've chosen for this build as the "streaked" pattern uninterrupted by over colouring is very nice indeed.
Cheers,
Lance
-
Very nice progress!
BTW, very nice to meet you here, Adam. :)
-
Thank you Przemol.
Now you know why I like three planes :)
Adam.
-
So your next one will be:
http://www.ikb.poznan.pl/przemyslaw.litewka/modele_pliki/albdr116.jpg ???
It is 72nd scale Elf model but WNW 32nd scale conversion should be just feasible.
-
One of my polish friends told me that he has problem with fixing machine guns in this model. I have Masters set.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01256.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01258_zps9638f531.jpg)
And some pictures from montage.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01259_zpsb31ee4ac.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01261_zps1c7cda3f.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01263_zpsd245a04f.jpg)
Adam.
-
These PE Spandaus look great indeed. Fine work!
-
Yesterday evening was fixed tail skid. This allowed to to glue fuselage.
I installed control cables for rudder and elevator.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01272.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01271.jpg)
Next halves of fuselage was glued. ;D
Now I can see how big is my model. ;D
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01274.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01277.jpg)
Adam.
-
Looking very nice, Adam.
-
Lovely work Adam, dont forget to fill out the middle tailplane section before you paint it though, I don't know what Rodens reasoning was for moulding it shallower. Impressive so far.
Keith
-
She's coming along beautifully, Adam.
Cheers,
Bud
-
Thanks my friends .
Keith you are right there is terribly place. :P
Adam.
-
Adam, Beautiful interior work, Stunning!! I am envious of the quality of your work!!
RAGIII
-
Thank you :)
Adam
-
Adam,
This build of yours is maintaining a very high standard; can't wait to see more. Beautiful work!
Cheers,
Lance
-
Putty - sandpaper - putty - sandpaper....... :P
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01278_zpsf8e4668b.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01281_zps9ef3d13a.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01282_zps7648496e.jpg)
In meantime I'm cutting off small parts - monotony :(
Adam.
-
Fuselage is ready for painting.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01338_zps429a5881.jpg)
When I finished my work with bottom of the fuselage one of my polish friend told me, that easier will be putting peace of tinfoil.
On this picture it is pretty visible that it is good idea, probably I will do this:
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC05835_zps99546263.jpg)
Now I'm preparing for painting streaking camouflage.
First test of Lifecolors paints.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01353_zps6a4d2e33.jpg)
I made test model to see result of painting.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01344_zps93887068.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/m_DSC01348_zpsf0c85a2b.jpg)
Adam.
-
Yes, we all know the monotony of filling and sanding... And cleaning the parts cut off the sprues...
The test version of streaking does look fine. Yet, I guess it is 72nd scale Dr.I and I am afraid the same technique may not work so well on larger surfaces... I wish you luck and am looking forward to see the final result.
-
Thanks Przemol.
You are right with painting technique. I made another test on bigger surface, it look not good. I will have to make test with different brushes. I'm using flat brush for small model was OK, but here I have to find bigger and I will do it again. Earlier I tried to do streaking by airbrush, but it wasn't good idea. :-[.
Adam.
-
Great work and progress Adam ;)
Andrew
-
Adam, I am really looking forward to see your results. I can hardly remember a model with convincing streaking, probably what Wojtek Fajga did once using his decals was closest to reality IMHO. That is why I avoid this camo, I have built black Jacob's Dr.I and have plans to build red/white Raben's one later. Streaking intimidates me.
-
Adam,
What PrzemoL said. ;) Seriously, it IS hard to make convincing streaking. I was talked into doing a Fokker tripe as my first kit when returning to scale modeling and this aspect alone frustrated me more than any other aspect, and my learning curve was steep never having worked with p/e, resin, used and airbrush, etc. ever before.
Hang in there, we're all pulling for ya!
Warren
-
Looking quite excellent so far. I have another Encore boxing of the same kit I'll have to crank out one day. When I do, I hope it turns out as nice as yours is looking.
-
My friends, thank you for yours wishes.
I made next test of painting, I painted big surface according principles of painting which i used in 72 scale.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01354_zpsa8a270ae.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01356_zps8f6636f6.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01357_zps8dccc36b.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01358_zps96e1c139.jpg)
I was painting by flat brush and Lifecolor paints mixed with small quantity of water.
When result of this test seems for me acceptable I dared to paint my plane.
Results you can see beneath.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01359_zps88fc4611.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01360_zpsb6f5077b.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01361_zpsb71d7934.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01362_zps677f38fe.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01363_zps6a294430.jpg)
Adam.
-
Hello Adam: As has been said by many here, the streaking is a difficult scheme to paint. It is all subjective. I think yours looks convincing and you did a good job. As the model comes together it all sort of works out. There are as many techniques as there are modelers. Your work is outstanding and I am watching with interest as you progress on this build.
Best
Mark
-
Thank you, Mark.
Yours comment was a motivating factor, to to continue the work.
I sit down in my workshop. This is my temporary workshop. in turn of the year I'm plannig to make better.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01365_zpsdb597b79.jpg)
I set to paint black crosses on the upper wing.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01366_zps6b6e9c4c.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01367_zps58aa9fae.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01368_zpsaa382cc6.jpg)
I couldn't find any picture of my model, I found only left side painthing drawings, so I decided paint similar to the Hptm von Tutschek's plane from 12 Jasta. Black cross with white edging will be paint on the black surface.
Never paint black on black, so I'm chose one of color from Lifecolors set for painting rubber.
I will be next very big test for me.
Adam.
-
I love your working desk, especially for the beer!!!!!
The use you make of old CDs is really ingenious.
Getting back to the model, I like very much the way you painted streaking, you're going very well!
-
Nice job on the beer mug. It looks very realistic. ;)
Cheers,
Chris
-
Hello Adam:
I like the black crosses and markings of Von Tutschek. It is not flashy but very attractive and business like. Your work space looks a lot like others I have seen, including mine to include the occassional adult beverage! ;D
Best
Mark
-
Today first time I used masks for painting.
Sticking on masks and painting was without any problems.
But removing masks was nearly cause of heart attack. :'(
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01375_zps2c5b76fa.jpg)
I will have to manage with this problem. :-\
All others crosses are looking well. :) in my opinion.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01376_zpsacdeb6ce.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01374_zps0ba86312.jpg)
Adam.
-
Adam,
Sorry to read of your masking difficulties my friend. But a least the damage is very much repairable. By the way my compliments on your outstanding streaking camouflage,very well done.
Highest Regards,
Gregory Jouette
-
oh... damn... the damage is huge... I agree the other crosses are perfect! and the streaking in outstanding, so you have to solve that problem without re-doing too much, my friend calm dowm and get back to the bird after a few days (I would do so!)...
Keep us informed!!!!
:(
-
Sorry to read of your mishap, Adam, but as Gregory has said, the repair is not too difficult. Good luck.
Cheers,
Bud
-
You've chosen an excellent scheme. I may have to do one myself, when I crack open my extra Encore kit. Looks sharp.
-
That's a bummer Adam, but with your skills I'm sure you'll have it fixed it up nicely ;)
Great progress.
Andrew
-
bummer on the mishap but overall it looks fantastic, should clean up eh?
-
Thanks my friends for the good word. :)
Now I'm finishing painting of this cross, soon I will show picture with result of my struggle.
Adam.
-
I am confident in your skills, I am sure the result will be even better than the previous situation!
...ENGAGE!
>:(
-
Been there, done that, and will inevitably do it again, so I feel your pain. We put so much work into these models, take all sorts of precautions, and still these incidents rear their ugly head from time to time. The secret as we all know is in perseverance, and not giving up. I look forward to seeing how you fix the problem. And fix it you will!
Cheers,
Chris
-
Chris I agree with you, in such cases my first verb is ....... :-X, but lather I'm singing "Don't worry, be happy ...." and I'm saying too my self you are do it just for relax. ;D
Now this cross is repaired
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01378.jpg)
Next big challenge is painting checker. Masks for it was made by me.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01380.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01381.jpg)
My checker is ready. :)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01386.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01387.jpg)
Now time is for painting machine guns. I used first time Lifecolor set for guns.
Result see bellow ;D
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01388.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01389.jpg)
Yesterday i try to fit this armament but it need small adaptations. "Don't worry be happy....'
To be contiued
Adam
-
Fine recovery, Adam! The masked checkerboard is nice, too. And Spandaus look very realistic.
Looking forward to see more.
-
Adam, although I already knew you would, I must say that you've made a simply astonishing job...
Antonio
-
What fix?? It looks perfect to me! ;D
Cheers,
Chris
-
Lovely recovery Adam, she is shaping up really nicely.
Those Maxims look just about perfect, Lifecolor paint... must get some.
Keith
-
Keith.
This set for gun is rather easy to use, but other paints need a little practice. I'm using of course air brush, and for small parts rather brush. This colors ought to be paint very small layers which should dry before paint the next layer.
Adam.
-
Well done, Adam. Your repair is flawless.
Cheers,
Bud
-
.......................and very nice recovery on the "peeled cross" problem. Just like new and looking very good!!
Cheers,
Lance
-
Its all coming together now. A very sharp bird!!
Steve
-
Thank you for support, my friends. ;D
All three wings and upper wing struts are fixed, and machine guns are ready for action ;)
Installing armament wasn't easy but was very stressful. :P
Now few pictures showing what is done.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01395.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01396.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01397.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01398.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01399.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01400.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01401.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01392.jpg)
Adam.
-
Lovely bird!
Wheels are needed for landing on the desk!
Keep on working Adam ;)
regards
K
-
Wonderful
-
Very, very nicely done!
Cheers,
Chris
-
Adam,
Great progress - looking really sharp now.
Regards
Dave
-
How's this bird going Adam? Looks like you're nearly done.
Andrew
-
Andrew.
It is not at all finished. Now I'm close to finish fuselage. Some of my friends noted that MG in my model are a little cross-eyed, so I took out and I adjusted these guns.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01403.jpg)
Next ailerons, elevator and rudder got lines.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01405.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01407.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01408.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01409.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01406.jpg)
Undercarriage is finished, I bought Mig mud and I tried to muddy wheels.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01411.jpg)
And now I would like to show some pictures o my Fokker.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01413.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01414.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01415.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01417.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01418.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01419.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01422.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/MDSC01424.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01428.jpg)
Engine, his cover and propeller are not glued.
I'm planing to finish the fuselage today .
Few days ago I've got resin engine from Vector, so I have two engines now. I will do this both engines and lather I will decide which will be put in to my model.
Adam.
-
Looks great to me.
-
She looks great sitting on her feet!!
Steve
-
Adam,
Coming along beautifully. I was drawn to the work you did on the controls, particularly the control horns on the ailerons. Are they brass and how did you do the hinges? I really like the realism you achieved and this is going to be one fine model!
Cheers,
Lance
-
Thanks for good opinions.
Lance.
Control horns was taken from PE Part set for this model.
Adam.
-
Very nicely done so far Adam.
Best
Mark
-
Lovely work it shows in the close up shots. Nice
Keith
-
Fantastic Adam, hat off from me!
:)
-
Beautiful Triplane Adam. I am impressed!!
RAGIII
-
Fuselage is finished.
I would like to try Migs mud on wheels, but I done it firs time without any experience, result is not good, so wheels was cleaned after photographing.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01437.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01438.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01439.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01440.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01442.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01443.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01447.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01461.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01469.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01471.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01474.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01479.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01481.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01484.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01489.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01490.jpg)
Now is time for engine and propeller.
Adam.
-
I like your weathering but Im not sure about the mud pattern on the wheels - but theres probably a photo that looks just like that!!
Steve
-
Steve.
Wheels was washed and I will try again.
Now is time for engine or engines ;)
Few days ago I got new engine from Vector.
Roden's engine seems a little to big, but I will do both, on the Rodens I will try painting such big for me engine.
Now some pictures my engines.
Engine from Roden set.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01501.jpg)
From Vector.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01503.jpg)
Here we can see difference.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01506.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01507.jpg)
I think very usefully will be my pictures which I made in Polish Aviation Museum in Krakow.
There is on on the biggest collection of engines.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC08293.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC08295.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC08296.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC08297.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC08298.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC08299.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC08300.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC08301.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC08302.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC08303.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC08304.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC08305.jpg)
Adam.
-
Fantastic pictures Adam, thanks for sharing!
-
Great reference pics. Your wheels prior to the REALLY heavy weathering looked fine.
Steve
-
Now I have time to put in some pictures of the first engine.
Cylinders was painted by Model Master Metalizer.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01511.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01512.jpg)
Next step.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01513.jpg)
Almost ready engine.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01520.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01521.jpg)
Here you can see, engine is a little to big. :-[
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01522.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01523.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01524.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01525.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01528.jpg)
Few days ago I was started with the engine no 2, now I know that this engine is also to big, soon I will put in pictures.
I will have to make correction of the engines cover.
Adam.
-
Adam is that the kit cowl with p/e detail? Is there enough material on the inside of it to grind out? Is the Vector engine also too big?
Steve
-
You're doing some beautiful work, Adam. The engine came out nicely, indeed.
As Steve suggested, can you thin out the cowl? It has to be excessively thick, compared to the real thing, because of the limitations on moulding the parts. Or will you perhaps need to reduce some of the cylinder details to make the cowl fit (which would be a shame).
Dal.
-
Rather than removing details from the tops of the cylinders, you can shorten the cylinders at the base. That will reduce the diameter of the engine while preserving the cylinder head detail.
Peter
-
My friends thanks for advice.
As you suggested, first I will try thin out the cowl.
If it don't help I will try to shorten cylinders in Vector engine.
Adam.
-
Adam,
Whatever you decide I'm looking forward to seeing the results. Outstanding project to date my friend.
Highest Regards,
Gregory Jouette
-
Last time I hadn't any time for modelling. :-\
I only grind out cowl from inside , for Rodens engine it is enough.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01560_zpsc13cd268.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01559_zps3a2993c0.jpg)
I think it is looking good.
In vector engine I reduced a little cylinders sockets at the engine corps. I think that it help.
Today I began painting parts for this engine.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/MDSC01554_zps5cd0e7c0.jpg)
During painting I noticed that in 2 cylinders was broken valves lever, on picture from right side. :-[.
Adam.
-
Glad to see the cowl thinning worked.
Steve
-
I'm sorry that I stopped this thread, but I haven't time to load new pictures. :-\
From time to time I was working with Vectors engine, and I made only few pictures. :-\
Here all parts was painted.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01561_zps143622e5.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01563_zpsba2f06e4.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01564_zpsbb731fe0.jpg)
With propeller not yet finished.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01565_zpsb8be6e9d.jpg)
Here finished engine.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01575_zps8cdca783.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01577_zpsb284a33a.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01578_zps0d0ace29.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01589_zps82803bf8.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01590_zpsa234f1e4.jpg)
Engines cover seems good.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01594_zpse0484246.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01596_zpsa5d7ed9f.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01598_zps23f46fd3.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01599_zpsed7d8a18.jpg)
My Fokker is finished ;D
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01623_zpsab68dee3.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01625_zps95edf182.jpg)
Now some pictures my finished Fokker.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01655_zps772a0b32.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01656_zps2374454c.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01657_zpsb5160e51.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01658_zps92f0091a.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01661_zps319eea77.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01662_zps875d018d.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01664_zpse17b9be3.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01665_zps91dd5e3f.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01666_zpse8d8c165.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/FokkerDr-1/mDSC01667_zps0a6beb92.jpg)
Maybe next week I will find more time to make pictures for Completed models thread.
Adam.
-
Adam,
Absolutely lovely DR1 you have put together there - well done, mate!
Regards
Dave
-
Very nice result Adam, congrats!
-
Brilliant work, Adam! You can really be proud of this one.
Cheers,
Bud
-
Great looking tripe. The Vector engine looks very good!
Steve
-
Adam,
She's one beautiful Tripe my friend. Congratulations Well Done!
Highest Regards,
Gregory Jouette
-
Great work Adam, you've produced an excellent Tripe!!
The engine looks great. Well done!!
Andrew
-
Thank you my friends for yours opinions.
Now I'm preparing for making pictures to completed models gallery.
Adam.