forum.ww1aircraftmodels.com
WW1 Aircraft Modeling => Under Construction => Topic started by: pustota on May 05, 2022, 02:15:03 AM
-
Good day.
I will start building a flying ship. The model has been with me since 2006... the p.h. fret and AIMS decals.
I just wanted to put it all together and put it on the shelf, a
beautiful, colorful boat. But! Out of nowhere, "Wingnut wings" released his Felixstowe and I realized that Roden's model's interior is not good at all. Even with Part photo etched.
And I began to be smart with the boat's skeleton. The white pieces are partitions.
Here's what happened tonight:
(https://i.postimg.cc/3wXpLN6f/20220501-194025.jpg) (https://postimg.cc/bGvsryq1)
(https://i.postimg.cc/nhHCH2w2/20220501-194120.jpg) (https://postimg.cc/zVcJ7CNH)
(https://i.postimg.cc/W39dKk78/20220501-194152.jpg) (https://postimg.cc/S2MQYj3Y)
(https://i.postimg.cc/tCdsQwD7/20220501-194202.jpg) (https://postimg.cc/tYTqFrKH)
(https://i.postimg.cc/GpttD2Rs/20220504-102831.jpg) (https://postimg.cc/xkr9D9c0)
(https://i.postimg.cc/g2qkQhzh/20220504-131942-2.jpg) (https://postimg.cc/DS0Tb8bf)
(https://i.postimg.cc/kGptVb6G/20220504-132043-2.jpg) (https://postimg.cc/xNLdhqPV)
(https://i.postimg.cc/fLkzVgx7/20220504-132849-2.jpg) (https://postimg.cc/XGSShL1X)
(https://i.postimg.cc/pLZ584n3/20220504-133027-2.jpg) (https://postimg.cc/xXXdVs5P)
(https://i.postimg.cc/QxZFzhQR/20220504-133042-2.jpg) (https://postimg.cc/mhVZzx6w)
(https://i.postimg.cc/DzNZPTfp/20220504-133624.jpg) (https://postimg.cc/jWztRB7y)
(https://i.postimg.cc/Gmq99DWC/20220504-133728.jpg) (https://postimg.cc/w1R9G1xf)
-
You are a brave man! I will be following your progress with great interest.
Stuart
-
As Stuart said, you're braver than me! I too will follow with great interest.
WD
-
Looking forward on seeing this unfold
Alexis
-
I'm not a brave, i just young and naive :D
-
Love this - always fancied building one of the Felixstowes so looking forward to seeing how this comes together (Nice start by the way) :)
Paul
-
I will watch this with great pleasure and interest. Felixstowe flyng boats were always close to my heart. I have 3 of them in my collection, two Rodens and one WNW. Unfortunately, I could not correct all the errors on my Roden's ones because WNW was not yet available when I built them. Good luck with your build!
-
Thank you.
Yes, a very beautiful plane, I agree with you. Free time for construction, it's a pity i can't buy it.
-
This is one of those types that fascinates me, and yet I have no desire to own (let alone build!) one, so I'm interested to follow along. A great start!
-
Good day.
Made, painted and installed the base for plank flooring in the hold.
(https://i.postimg.cc/65NBcxtk/20220506-111752-2.jpg) (https://postimg.cc/0rcg536n)
(https://i.postimg.cc/C13S9WDf/20220506-111823-2.jpg) (https://postimg.cc/0M0TwXV8)
(https://i.postimg.cc/CMnKJ4Dq/20220506-111831-2.jpg) (https://postimg.cc/kD99gKTJ)
(https://i.postimg.cc/fbHbq2Bx/20220506-111850-2.jpg) (https://postimg.cc/FfLm7ZtR)
(https://i.postimg.cc/x8LnQtyp/20220506-111930-2.jpg) (https://postimg.cc/m1Z0N3n7)
(https://i.postimg.cc/QNFFwDLV/20220506-112046-2.jpg) (https://postimg.cc/CdVMnWxV)
(https://i.postimg.cc/qvxqyMKD/20220506-112053-2.jpg) (https://postimg.cc/3kW3Hhn2)
(https://i.postimg.cc/1XF5t9PH/20220506-112109-2.jpg) (https://postimg.cc/rR8LZ2D0)
(https://i.postimg.cc/GtTnQz5h/20220506-112146-2.jpg) (https://postimg.cc/YL7P2N7J)
-
Now the oils.
(https://i.postimg.cc/0N5xWnpG/20220506-135229.jpg) (https://postimg.cc/sMLt1pH1)
(https://i.postimg.cc/Hky7WpKv/20220506-135241.jpg) (https://postimg.cc/pmPdqtPK)
(https://i.postimg.cc/qRdcHtvG/20220506-135251-2.jpg) (https://postimg.cc/2q2L4Svq)
(https://i.postimg.cc/2SV7QRtn/20220506-135258-2.jpg) (https://postimg.cc/cvG3Wj0J)
(https://i.postimg.cc/wBrPXQFj/20220506-135511-2.jpg) (https://postimg.cc/nsv0Z76y)
(https://i.postimg.cc/SsyXGcKH/20220506-135514.jpg) (https://postimg.cc/R3DVS6KT)
(https://i.postimg.cc/hjbLDSJR/20220506-135514-2.jpg) (https://postimg.cc/vgTgXwL0)
(https://i.postimg.cc/J75xmQJH/20220506-135522-2.jpg) (https://postimg.cc/t77WNWB9)
(https://i.postimg.cc/vThtzQMt/20220506-143321-2.jpg) (https://postimg.cc/XBZ5N6rr)
(https://i.postimg.cc/1zF0d0st/20220506-143326-2.jpg) (https://postimages.org/)
(https://i.postimg.cc/vTKcMjvd/20220506-143345-2.jpg) (https://postimg.cc/dZ8qj5XW)
image uploader (https://postimages.org/ru/)
-
Very impressive use of PE and scratch building with the interior framework and floor. Looking Lovely!
RAGIII
-
Keep at it, it's looking great!
WD
-
Only just seen this - you are indeed either brave or mad (or both!) trying to attempt this. Looking at what you have done so far I would add skilled to the description.
Stephen.
-
Good day. Finished painting and installing the deck. It was not easy to understand, decipher and depict a deck of three levels. The main structure of the hold is almost finished - there is stairs, one transverse beam and a wooden "slide" missing.
I go further.
(https://i.postimg.cc/rFFjjJNX/20220514-185840.jpg) (https://postimg.cc/rz35F5HQ)
(https://i.postimg.cc/X7H8zCsZ/20220514-185914.jpg) (https://postimg.cc/Xp5dZpS3)
(https://i.postimg.cc/Vvsq7fMB/20220514-185940.jpg) (https://postimg.cc/9RSw0jLr)
(https://i.postimg.cc/fbXfygDX/20220514-185956.jpg) (https://postimg.cc/xkfzF5kT)
(https://i.postimg.cc/4dgb9bx0/20220514-190008.jpg) (https://postimg.cc/4KW9Cctv)
(https://i.postimg.cc/wj1V8jrw/20220514-190017.jpg) (https://postimg.cc/tsHPFpp6)
(https://i.postimg.cc/LX3kBYq8/20220514-190034.jpg) (https://postimg.cc/CBdfwKH3)
(https://i.postimg.cc/fR1vwhnD/20220514-190108.jpg) (https://postimg.cc/sM9WcqgN)
(https://i.postimg.cc/d3W8pbjM/20220514-190128.jpg) (https://postimg.cc/D4XJbYN5)
(https://i.postimg.cc/HW34rMDS/20220514-190145.jpg) (https://postimg.cc/PNp8cPqZ)
(https://i.postimg.cc/rFmGxpqq/20220514-190151.jpg) (https://postimg.cc/G9Ws1dBf)
(https://i.postimg.cc/L6btTMsL/20220514-190206.jpg) (https://postimg.cc/3d208Vmx)
-
That looks excellent!
-
Thank you.
-
Very fine woodwork.
-
Thank you!
-
Excellent work on the painting of the floor and frames. Looking Terrific!
RAGIII
-
Thank you!
-
That’s really cool.
Andreas
-
Beautiful woodwork!
-
Thank you guys!
-
Good day. Began to settle in the hold. Of course, I haven't painted yet.
(https://i.postimg.cc/Wz5qGQdW/20220516-205821-2.jpg) (https://postimg.cc/2LB5m9Fh)
(https://i.postimg.cc/9Mt7M4Cj/20220516-205829-2.jpg) (https://postimg.cc/k6G4Yg2j)
(https://i.postimg.cc/d0CCbHf3/20220516-205841-2.jpg) (https://postimg.cc/sBV1ScsC)
(https://i.postimg.cc/3RHGYjMB/20220516-205852-2.jpg) (https://postimg.cc/Z9VnLd5B)
(https://i.postimg.cc/Qx6c1W58/20220516-205904-2.jpg) (https://postimg.cc/BXK8GbMk)
-
Good day. Continued work with the hold. Finished the fuel department today (the pumps haven't been installed yet). Thank you.
(https://i.postimg.cc/6p7pn2hH/20220518-224324.jpg) (https://postimg.cc/hXBnqG6x)
(https://i.postimg.cc/25hj9sMh/20220518-224354.jpg) (https://postimg.cc/SXQpJvyx)
(https://i.postimg.cc/Jn8rfTCg/20220518-224415.jpg) (https://postimg.cc/67HxRf3L)
(https://i.postimg.cc/ydT1sFVN/20220518-224431.jpg) (https://postimg.cc/S2JFGYY0)
-
Amazing work!
-
As Zac has written, the level of detail that your are adding is truly amazing.
Stephen.
-
I must agree with Zac and Stephen, Amazing!
RAGIII
-
Thank you, friends!
Continued work with the hold.
Radio operator/navigator place.
(https://i.postimg.cc/YqhGpNwm/20220521-224931-2.jpg) (https://postimg.cc/zVYX7gvJ)
(https://i.postimg.cc/BZhP9YR0/20220521-224950-2.jpg) (https://postimg.cc/s1hg5cV6)
(https://i.postimg.cc/Wz4DqgFC/20220521-225000-2.jpg) (https://postimg.cc/jwGqGWh4)
(https://i.postimg.cc/k4qR9knn/20220521-225057-2.jpg) (https://postimg.cc/sBHg4HQ8)
(https://i.postimg.cc/XqDrfq9J/20220521-225105-2.jpg) (https://postimg.cc/vxf8MQqF)
(https://i.postimg.cc/L8g1VtCM/20220521-225124-2.jpg) (https://postimg.cc/tsyJqxGr)
(https://i.postimg.cc/2yjWdgJH/20220521-225137-2.jpg) (https://postimg.cc/DJDmnp7s)
-
Beautiful work.
WD
-
Really nice detail work on inners so far , packed with detail !
Alexis
-
Beautiful detailing and painting!
RAGIII
-
Thank you!
-
I hope this detail will be somewhat visible on the finished model.
-
Good day.
Yes i'll live the top of the fuselage semi-open.
Additions here, as I said, these are two etchings: "Part" and "Brengan", in both sets very few details for the hold.
80 percent of what I made was all Evergreen plastic sheets and sticks.
The construction of the hold is completed, the next stage is stretching in the hold.
Thank you.
(https://i.postimg.cc/9fNpctmT/20220525-223944.jpg) (https://postimg.cc/94ZTp9qF)
(https://i.postimg.cc/vZhhNwC0/20220525-224015.jpg) (https://postimg.cc/CRZbRXh8)
(https://i.postimg.cc/RVrg3RcL/20220525-224048.jpg) (https://postimg.cc/nMk4gqSX)
(https://i.postimg.cc/TPq6S1fZ/20220525-224130.jpg) (https://postimg.cc/v1BkxQ1z)
(https://i.postimg.cc/tJ6DSZH6/20220525-224202-2.jpg) (https://postimg.cc/ctsQ6JC1)
(https://i.postimg.cc/L82vD8Qq/20220525-224220.jpg) (https://postimg.cc/rKZSFMkc)
(https://i.postimg.cc/k55srhmq/20220525-224409.jpg) (https://postimg.cc/fV6mmCyr)
(https://i.postimg.cc/JzH7TRyL/20220525-224450.jpg) (https://postimg.cc/LJRM5KBC)
(https://i.postimg.cc/28K8F1SG/20220525-224508.jpg) (https://postimg.cc/nCqJnc79)
(https://i.postimg.cc/zfnzrpS2/20220525-224521.jpg) (https://postimg.cc/f3Rn7cPY)
(https://i.postimg.cc/PfD4kwBp/20220525-224534.jpg) (https://postimg.cc/s1VSYvfs)
(https://i.postimg.cc/MTqWKR96/20220525-225321.jpg) (https://postimg.cc/DWpVxWVH)
(https://i.postimg.cc/mDtm9pX8/20220525-225716.jpg) (https://postimg.cc/9RHP5bj7)
(https://i.postimg.cc/MKbmn8Zz/20220525-225724.jpg) (https://postimg.cc/N5FHnSrn)
(https://i.postimg.cc/TwLc1L1s/20220525-225740.jpg) (https://postimg.cc/njxmwLvK)
(https://i.postimg.cc/qM8j23wV/20220525-225747.jpg) (https://postimg.cc/562BVjDn)
(https://i.postimg.cc/1RVW5TNz/20220525-225756.jpg) (https://postimg.cc/5j15ssgc)
-
Fantastic work !
Alexis
-
An epic build! Lovely work! Marc.
-
Thank you for so kind words!
-
Beautiful work. Small scale excellence!
Steve
-
Wonderful work so far.
WD
-
This really is quite Beautiful! Outstanding interior in a small space!
RAGIII
-
Good day. Began to sheathe the bottom of the case. Here's what I did today.
Thank you.
(https://i.postimg.cc/43wQHT30/20220528-180336.jpg) (https://postimg.cc/B8LKRkH5)
(https://i.postimg.cc/4xk5r5MW/20220528-180346.jpg) (https://postimg.cc/XpLd5wn5)
(https://i.postimg.cc/c1vPWF9W/20220528-222642.jpg) (https://postimg.cc/0rqVd01X)
(https://i.postimg.cc/gr9VbzMx/20220528-222647.jpg) (https://postimg.cc/GTQ8kCnR)
(https://i.postimg.cc/DZMQ5dLd/20220528-222652.jpg) (https://postimg.cc/LYjZ8Pyn)
(https://i.postimg.cc/FKhxKKhc/20220528-222706.jpg) (https://postimg.cc/HrPMZdcs)
(https://i.postimg.cc/8cfRYJb8/20220528-222712.jpg) (https://postimg.cc/WqjqF4KS)
-
That's a great idea using masking tape to replicate wood planking. Thanks, I will remember that.
Alan.
-
That interior is a model in its own right worthy of display. The wood planking on the hull is also an extremely good novel idea. This will be a must see model when it is finished - and in the True Scale too.
Stephen.
-
The planking should look great! Are you doing something to make sure the tape stays secured to the Hull?
RAGIII
-
Thank you!
-
Wonderful work as usual, pustota, the idea of using masking tape to simulate the planking is great, my concern would be that, being it a low tack tape, it could detach after some time, I imagine you have a plan to properly seal it... How do you think to do that?
Antonio
-
My plan is this: after the tape has been applied all over, I will apply a coat of undiluted matt clearcoat, than the oil and than enother matt clearcoat. I houpe it works.
-
Beautiful work pustota, I do hope your idea works.
WD
-
Great work on the interior!
And interesting idea for the planking of the bottom - I am looking forward to see the final result.
-
Amazing work with the tape, what a clever idea. Fingers firmly crossed that it all works out for you!
-
Thank you.
Here its done:
(https://i.postimg.cc/rmqx1G3V/20220601-151953.jpg) (https://postimg.cc/QBnFs7jw)
(https://i.postimg.cc/XvCQHgs9/20220601-152001.jpg) (https://postimg.cc/DW7rm1kz)
(https://i.postimg.cc/Dyxj80W4/20220601-152014.jpg) (https://postimg.cc/w7scr6Q9)
(https://i.postimg.cc/9fdywgxg/20220601-152034.jpg) (https://postimg.cc/p9dmgCMK)
(https://i.postimg.cc/wTq4qLBd/20220601-152047.jpg) (https://postimg.cc/vDKtX19P)
(https://i.postimg.cc/W3mSj1L3/20220601-152058.jpg) (https://postimg.cc/jw5y4Kj0)
(https://i.postimg.cc/0jcfMXN1/20220601-152117.jpg) (https://postimg.cc/V00M2RMK)
(https://i.postimg.cc/NG4bzFkC/20220601-152127.jpg) (https://postimg.cc/7b5gCxcS)
(https://i.postimg.cc/Ssc1sG8m/20220601-152231.jpg) (https://postimg.cc/wyTQ4L0r)
-
That is absolutely Gorgeous!
RAGIII
-
That is too cool!!
-
This looks so f***ing good ,I guess you 'll not finish this one in high visibility pattern?
-
Looks so fabulous! I do hope that sealing the tape makes it hold permanently.
WD
-
Thank you to all of you!
Now the oil paint is dries up.
After that it will be a matt clearcoat.
-
Fantastic result Pustota!
-
Good day.
The oil dried up, covered with a layer of matte varnish (Vallejo), this is the final look. The fuselage is closed for a while from dust, and I turn to the wings.
Thank you.
(https://i.postimg.cc/6QMc1dRV/20220605-204900.jpg) (https://postimg.cc/gw63xLgr)
(https://i.postimg.cc/fRjBY4Rr/20220605-204947.jpg) (https://postimg.cc/FYzyQBcy)
(https://i.postimg.cc/PqXK46Lr/20220605-205009.jpg) (https://postimg.cc/68Pd6fLD)
(https://i.postimg.cc/J0kGCqBf/20220605-205033.jpg) (https://postimg.cc/H8TpQbzz)
(https://i.postimg.cc/WtctNkGh/20220605-205050.jpg) (https://postimg.cc/K3QmQ4s2)
(https://i.postimg.cc/J4XT4HVm/20220605-205057.jpg) (https://postimg.cc/rK8GfmwY)
(https://i.postimg.cc/dVK57QwC/20220605-205112.jpg) (https://postimg.cc/N5p6ScyG)
(https://i.postimg.cc/mZtXJ6mP/20220605-205149.jpg) (https://postimg.cc/nMfGQTbx)
(https://i.postimg.cc/7PdskMRm/20220605-205204.jpg) (https://postimg.cc/7b1M17w2)
-
Lovely work! I am looking forward to the wings !
RAGIII
-
Beautiful!
WD
-
Spectacular.
-
Wonderful!!!
-
Thank you, frends.
-
The wood finish on the hull is marvellous!
Stephen.
-
Good day. For the last two weeks I have been working on wings.
Here's what happened:
(https://i.postimg.cc/8PNBMcZH/20220614-174836.jpg) (https://postimg.cc/s1HhRjdQ)
(https://i.postimg.cc/mg6QvwBX/20220615-122145.jpg) (https://postimg.cc/gx8XR3w8)
(https://i.postimg.cc/Y21zvYz0/20220615-185524.jpg) (https://postimg.cc/DmwXDWD3)
(https://i.postimg.cc/15h7TyJn/20220615-210157.jpg) (https://postimg.cc/14BKV1xs)
(https://i.postimg.cc/sxS6XLDg/20220617-111928.jpg) (https://postimg.cc/tnqtv2xK)
(https://i.postimg.cc/tgKFT41F/20220617-132808.jpg) (https://postimg.cc/94BDgVYf)
(https://i.postimg.cc/rwp1ZbXR/20220617-132818.jpg) (https://postimg.cc/jLGnLMjR)
(https://i.postimg.cc/yYZnX2K1/20220618-111510.jpg) (https://postimg.cc/GHbkb79V)
(https://i.postimg.cc/J7gPXM9Y/20220618-111519.jpg) (https://postimg.cc/qgssVVB2)
(https://i.postimg.cc/W3Nf58n9/20220618-111546.jpg) (https://postimg.cc/Ff6ZRjwc)
(https://i.postimg.cc/gJ2NVJzQ/20220618-111549.jpg) (https://postimg.cc/3yzX73DF)
(https://i.postimg.cc/tg2z4j35/20220618-111611.jpg) (https://postimg.cc/Y4LFdTyG)
(https://i.postimg.cc/vT1hKN6v/20220618-111624.jpg) (https://postimg.cc/GTCv8zKB)
(https://i.postimg.cc/gJt4NWrJ/20220618-111627.jpg) (https://postimg.cc/8JWhzxRQ)
(https://i.postimg.cc/6Q0M4RXC/20220618-111637.jpg) (https://postimg.cc/1g8GL84z)
(https://i.postimg.cc/2SPD9sb0/20220618-112031.jpg) (https://postimg.cc/0zdFbHCS)
-
Gargrot made half open so that the hold could be seen.
(https://i.postimg.cc/xTBfBJBG/20220618-155156-2.jpg) (https://postimg.cc/TpqvDwdh)
(https://i.postimg.cc/QCWP7tSs/20220618-130357.jpg) (https://postimg.cc/RJ4X5vjb)
(https://i.postimg.cc/Fz7vBNZn/20220618-155204-2.jpg) (https://postimg.cc/p5b39N3D)
(https://i.postimg.cc/BQPs5Ztj/20220618-180754-2.jpg) (https://postimg.cc/56JZbVBJ)
-
The Volume of Masking you have done has paid off in a beautiful paint finish on your Model! Everything looks gorgeous! Cutting out the upper section and making framework to enable all to see your interior work is a Brilliant Idea!
RAGIII
-
Weeks worth of work have certainly paid off for you, beautiful work!
WD
-
Thank you.
I bow to my colleagues who built / will build this aircraft in 1/32 scale.
-
There is some fantastic work going on here, and the wood and fabric tones are brilliant! I would think this subject is even more difficult to make this beautifully in such a small scale... Well done and real inspiration. ATB, Marc.
-
Outstanding finish on the wings,Pustota!I especially like the chipped paint on the overhead tank ..did you use the Roden decals ?
-
Thank you.
Yes it's Roden's decals, and I had lucky with them.
I used a decal medium and decal fix from Vallejo.
So far so good...
-
I never had issues with the late Roden decals...the glossy type seems to work quite good.
The Felixstowe in my oppinion is one of the best Roden kits.
Most important when fixing the wings is to take care of the slight dyhedral of the outer panels of the upperwing to prevent sagging...
the engine support struts are a bit tricky,too.
-
Thank you Malaula.
I don't think that my decals is from the late stash. I bought that kit back in 2006...
Thank you about warning about the wings mounting.
-
Pustota,the dihedral should be applied to the underwing too as a matter of fact...I forgot to mention... :-\
-
Thank you
-
Awesome !
Alexis
-
Excellent work -together with PrzemoL's build from a few years ago this is an excellent reference!
-
Excellent work -together with PrzemoL's build from a few years ago this is an excellent reference!
I remember that build, and that thought crossed my mind as well that both are good references for us that haven't ventured down that road yet.
WD
-
Thank you friends!
-
Good day. The fuselage was covered with masks and painted in the main color. The next step will be applying parts from AISM. Having studied in detail (as far as possible) the photo of the original, I found some inaccuracies in the Roden's instruction:
1. The cockade was not on the lower surface of the upper wings.
2. There were no patterns on the floats
3. Only after the second redan the color was red, before it everything was unpainted, varnished with wood.
4. The drawing in the area of the machine gun ports on both sides of the fuselage is not correct.
Something like that.
(https://i.postimg.cc/2ysPL0p0/03.jpg) (https://postimages.org/)
(https://i.postimg.cc/nVXr7Mbm/10f6959d372b13783c1576cfefb279e3.jpg) (https://postimages.org/)
(https://i.postimg.cc/C1Y5k40L/20220629-103035-2.jpg) (https://postimg.cc/FfWhQ312)
(https://i.postimg.cc/jjyCDFGF/20220629-103051-2.jpg) (https://postimg.cc/NyfQVpG6)
(https://i.postimg.cc/4N3KWw9Y/20220629-123424-2.jpg) (https://postimg.cc/ThZYwVQx)
(https://i.postimg.cc/ZKDW238V/20220629-123500-2.jpg) (https://postimg.cc/BXHZ1jwK)
(https://i.postimg.cc/JnWDKLN8/20220629-123516-2.jpg) (https://postimg.cc/p9qLX3cc)
(https://i.postimg.cc/Kcfk7CRX/20220629-123529-2.jpg) (https://postimg.cc/23qSrcQT)
(https://i.postimg.cc/sxjBd4H0/20220629-123559-2.jpg) (https://postimg.cc/5Yr98LVw)
-
It seems to me that Roden used this drawing as a coloring guide:(https://i.postimg.cc/mZP3DbmX/267-2.jpg) (https://postimages.org/)
(https://i.postimg.cc/C5DDCZ6X/Screenshot-20220629-202502-Chrome.jpg) (https://postimg.cc/308dYwhF)
(https://i.postimg.cc/8PQLpH7S/Screenshot-20220629-202543-Chrome.jpg) (https://postimg.cc/JtxsKj36)
-
Top notch research and outstanding modeling!
There is so much to be learned here!
Willem
-
Awesome pant work!
RAGIII
-
Very nice work on this model. A very challenging scheme, and you've been progressing beautifully.
Cheers,
Gary
-
Very good sir, glad you ferreted that out, and that red looks great!
WD
-
Thank you!
-
Love how this one is shaping up - such an inspiring thread.
May I ask what you are thinning your 'Model air' paint with (I'm continually having trouble with it drying in the airbrush. At the moment I'm using distilled water and adding some Vallejo glaze medium or retarder) :-\
Paul
-
Yes, you are absolutely right.
I thin this (modelAir) paint 1:2 with the original Vallejo thinner. It takes some getting used to... That paint much different from Tamiya's acrylics.
-
Thanks for that - just ordered some of the Vallejo thinners to try. :)
-
Top notch work , love the scheme and well researched :)
Alexis
-
Good day. Started applying decals. Either the decal is old (about 10 years old), or the decal is of poor quality, I don't know. The decal is very hard and brittle. It crumbles to pieces all the way. Here is such a confusion.
(https://i.postimg.cc/gJwwJ25g/20220702-110132.jpg) (https://postimg.cc/DJTfpn7G)
(https://i.postimg.cc/VvndqHzM/20220702-110144.jpg) (https://postimg.cc/GT3LrK8h)
(https://i.postimg.cc/JzPt5XCT/20220702-110150-2.jpg) (https://postimg.cc/87f11j5W)
(https://i.postimg.cc/vZqHVd5k/20220702-110209.jpg) (https://postimg.cc/0zSqTFW0)
(https://i.postimg.cc/1zbmvcCK/20220702-182507.jpg) (https://postimg.cc/zLSYBW1L)
(https://i.postimg.cc/ZKmRkHT7/20220702-182520-2.jpg) (https://postimg.cc/14WPwpVw)
-
Your Felix is looking Fantastic! It is a shame that the decals are giving you issues. Wat you have done looks Great!
RAGIII
-
Looking great, and great job overcoming that difficulty. I'd say it's the age as I've not heard anyone mention this with these before. Microscale makes a product to spray over old decals to prevent this from happening.
WD
-
Good day.
Finished with decals. Topped with varnish and oil wash. The result is in front of you.
(https://i.postimg.cc/MTgLbHgG/20220706-204538.jpg) (https://postimg.cc/BLcNJSSW)
(https://i.postimg.cc/QCkq9M3w/20220706-204553.jpg) (https://postimg.cc/xN8mBnq3)
(https://i.postimg.cc/HsDKrJQZ/20220706-204648.jpg) (https://postimg.cc/kDswZgYK)
(https://i.postimg.cc/25VTcmQL/20220706-204739.jpg) (https://postimg.cc/94HG06Nc)
(https://i.postimg.cc/3xLnFWvH/20220706-204754.jpg) (https://postimg.cc/dhy2qs6W)
(https://i.postimg.cc/d0p6gX6H/20220706-204807.jpg) (https://postimg.cc/XZK9CsTd)
(https://i.postimg.cc/VksKtX5R/20220706-205059.jpg) (https://postimg.cc/2VJdRbQb)
(https://i.postimg.cc/0jfp5HGq/20220706-205150.jpg) (https://postimg.cc/WqdDX8f9)
(https://i.postimg.cc/15vpL25G/20220706-205155.jpg) (https://postimg.cc/ZCyBNfNn)
(https://i.postimg.cc/9QNYqS6m/20220706-205206.jpg) (https://postimg.cc/XrdCR2Nm)
(https://i.postimg.cc/L8hzRDnr/20220706-205219.jpg) (https://postimg.cc/9D54YGPp)
(https://i.postimg.cc/RhXHxJ9S/20220706-205235.jpg) (https://postimg.cc/bSSJQJsW)
(https://i.postimg.cc/13LNSQxq/20220706-205240.jpg) (https://postimg.cc/NKk08Zjs)
(https://i.postimg.cc/zfC31HSs/20220706-205340.jpg) (https://postimg.cc/hJGKLjYs)
(https://i.postimg.cc/8ktJ5WQD/20220706-205351.jpg) (https://postimg.cc/JtH4Yszd)
(https://i.postimg.cc/QtqBcKFQ/20220706-205405.jpg) (https://postimg.cc/JDG4Lnc0)
(https://i.postimg.cc/vHYr2bM8/20220706-205459.jpg) (https://postimg.cc/Z0QvCkCX)
(https://i.postimg.cc/P5L80q7H/20220706-205507.jpg) (https://postimg.cc/Wdv3ksjY)
(https://i.postimg.cc/XqHpzMcX/20220706-205514.jpg) (https://postimg.cc/fSdzVrPh)
-
That is absolutely Gorgeous! I think if you were to post this elsewhere and claim it was the WNW kit Most would believe you!
RAGIII
-
Thank you.
-
Wonderful work, you should be proud of these results. It looks fantastic.
WD
-
Wow... That's awesome!!
-
Truly breathtaking work, bravo for persevering with those decals!
-
She looks very good!
I have the Roden Curtiss H-16 in my stash.
My hands are itching!
Willem
-
Thank you. That wasn't easy to win those decals.
-
Love it. 8)
Frustrating when you have to fight decals, but there's only one winner here
Paul
(https://lh3.googleusercontent.com/jpmmP9-jj89zsXCh4l2R4Yz14YArEzlWvdrsMBpy8067c2XoGSlIBBaFQMc_51Pl0hvQnzAqCHtUv9YWaYoTZxQ3Yyu5Sppk9YAofSPJJtcVEjycoaM0qOSyz6aRjWsQYVUpNypNwQ=w480-h315-p-k) (https://lh3.googleusercontent.com/jpmmP9-jj89zsXCh4l2R4Yz14YArEzlWvdrsMBpy8067c2XoGSlIBBaFQMc_51Pl0hvQnzAqCHtUv9YWaYoTZxQ3Yyu5Sppk9YAofSPJJtcVEjycoaM0qOSyz6aRjWsQYVUpNypNwQ=w2400?source=screenshot.guru)
-
(https://i.postimg.cc/MpFKcQmf/20220724-170850-2.jpg) (https://postimg.cc/HrbCRjKT)
(https://i.postimg.cc/sXFjmC8V/20220724-170909-2.jpg) (https://postimg.cc/t15GRwpf)
(https://i.postimg.cc/rsNwzZfq/20220724-170939-2.jpg) (https://postimg.cc/q6gT5wfF)
(https://i.postimg.cc/s2Gf5gT6/20220724-170952-2.jpg) (https://postimg.cc/67wNXtJn)
(https://i.postimg.cc/jqH58CtB/20220724-171016-2.jpg) (https://postimg.cc/F1KNzrfx)
(https://i.postimg.cc/qMQ7TYtL/20220724-171022-2.jpg) (https://postimg.cc/QH9DgfJ9)
(https://i.postimg.cc/XYJY78d0/20220724-171029-2.jpg) (https://postimg.cc/6ykXMCMH)
(https://i.postimg.cc/X7nvt3vq/20220724-171036-2.jpg) (https://postimg.cc/MXrxjCVJ)
(https://i.postimg.cc/vHy1Mf0Q/20220724-171050-2.jpg) (https://postimg.cc/jC8q4wV9)
(https://i.postimg.cc/Xvrqx8Yg/20220724-171124-2.jpg) (https://postimg.cc/cKNdLfYK)
(https://i.postimg.cc/B618ZgWv/20220724-171143-2.jpg) (https://postimg.cc/njpV0qh8)
-
Excellent work on the engines. This whole build really could be mistaken for a larger scale!'
RAGIII
-
An excellent start!
-
Nice work on the engines , looking forward to the next update
Alexis
-
Good day.
I was out of business with corona covid 19...
Here some progress:
(https://i.postimg.cc/Wb6pxjjL/20220810-204859.jpg) (https://postimg.cc/zVv1RsV0)
(https://i.postimg.cc/yNWVJZRs/20220810-204913.jpg) (https://postimg.cc/CZTyXdJQ)
(https://i.postimg.cc/wjwqTV7w/20220810-204921.jpg) (https://postimg.cc/3kD5t2jG)
-
Great job with the engine's and their mounts. That doesn't look easy.
Alan
-
Beautiful work!
Engines look great and I love the work on the fuselage
Regards
Dave
-
I am late to the party, but what an amazing effort! Very nice looking finish!
/Fredrik
-
Thank you!
More progress:
(https://i.postimg.cc/Yq9mMcQz/20220813-122537.jpg) (https://postimg.cc/mhvry5XP)
(https://i.postimg.cc/sX7bM0Sn/20220813-122559.jpg) (https://postimg.cc/LY4x7Dxf)
(https://i.postimg.cc/WpMPztw2/20220813-122633.jpg) (https://postimg.cc/9zFkNmkS)
(https://i.postimg.cc/028hNnNf/20220813-122702.jpg) (https://postimg.cc/qg51b8yh)
(https://i.postimg.cc/fTBpSdth/20220813-122714.jpg) (https://postimg.cc/nC906CGd)
(https://i.postimg.cc/rwsb1pxR/20220813-122800.jpg) (https://postimg.cc/21p2mrHC)
(https://i.postimg.cc/HLffsCJc/20220813-122839.jpg) (https://postimg.cc/sB4nwq4s)
(https://i.postimg.cc/NjnnpwkJ/20220813-122909.jpg) (https://postimg.cc/CRjJxXtk)
(https://i.postimg.cc/kXqPb9TW/20220813-123000.jpg) (https://postimg.cc/4nL0CCk3)
(https://i.postimg.cc/1zZG9CmR/20220813-123024.jpg) (https://postimg.cc/3kn41Z0z)
(https://i.postimg.cc/Hx6X9TQj/20220813-123041.jpg) (https://postimg.cc/WFJd2LYP)
(https://i.postimg.cc/rszWh7Jj/20220813-123047.jpg) (https://postimg.cc/vxFcTqCx)
(https://i.postimg.cc/v8S51HYN/20220813-123104.jpg) (https://postimg.cc/s17MqzZY)
(https://i.postimg.cc/HscXbDjs/20220813-123127.jpg) (https://postimg.cc/hfnXqY9H)
-
Beautiful work, especially the weathering.
-
She is turning out to be a beauty !
Alexis
-
Thank you, guys!
More progress on tail section:
(https://i.postimg.cc/gJ4ZY6Bj/20220813-214514.jpg) (https://postimg.cc/344R1WhQ)
(https://i.postimg.cc/nVPX0xyy/20220813-214531.jpg) (https://postimg.cc/vD58ZJHh)
(https://i.postimg.cc/Z53vWQD1/20220813-214537.jpg) (https://postimg.cc/cvxLjFWm)
(https://i.postimg.cc/SKh2CGBj/20220813-214552.jpg) (https://postimg.cc/gxg2P3kP)
(https://i.postimg.cc/RhyqF11S/20220813-214624.jpg) (https://postimg.cc/PvbdVwF9)
(https://i.postimg.cc/vB84SZHs/20220813-214704.jpg) (https://postimg.cc/SX5QnqMT)
(https://i.postimg.cc/bJ6ZXfs2/20220813-214730.jpg) (https://postimg.cc/2bZkvJdz)
(https://i.postimg.cc/YqTmq786/20220813-214749.jpg) (https://postimg.cc/9rtfJv60)
(https://i.postimg.cc/brsspVtV/20220813-214757.jpg) (https://postimg.cc/FkX9xZG0)
(https://i.postimg.cc/gkLn75dn/20220813-214817.jpg) (https://postimg.cc/crZxgFvS)
(https://i.postimg.cc/t40YG5CD/20220813-214829.jpg) (https://postimg.cc/hfrS9Vm7)
(https://i.postimg.cc/8CNcjzv6/20220813-214848.jpg) (https://postimg.cc/FYCN6mDr)
(https://i.postimg.cc/2yb8PqsP/20220813-214857.jpg) (https://postimg.cc/tnbj6gC5)
(https://i.postimg.cc/9MffYgJX/20220813-214921.jpg) (https://postimg.cc/PLBht4g0)
(https://i.postimg.cc/43PdtRvF/20220813-214933.jpg) (https://postimg.cc/2qqrRJK4)
(https://i.postimg.cc/FF8K0Zcm/20220813-214958.jpg) (https://postimg.cc/c67ZSfX5)
(https://i.postimg.cc/VvxL1f15/20220813-215009.jpg) (https://postimg.cc/gLKPHPxP)
(https://i.postimg.cc/xCF1xG4v/20220813-215023.jpg) (https://postimg.cc/Fd3v1Smz)
(https://i.postimg.cc/fTdRC9jd/20220813-215045.jpg) (https://postimg.cc/w76zT3rx)
(https://i.postimg.cc/dVKtxV4x/20220813-215055.jpg) (https://postimg.cc/TpC6yf8V)
(https://i.postimg.cc/VkBLQPhL/20220813-215105.jpg) (https://postimg.cc/LJ5MLwRr)
-
Lovely work as always, and I'm sorry to hear of your illness.
-
Very nice ! Is that elastic thread you're using ?
-
This is a complicated aircraft to build in this scale. Your detailing is great and so is the weathering. Great job on the woodplanking. Very clever to use the Tamiya tape. It is very convincing!
I've been watching the build of your engines closely as I need to build 4 of them from WNW sprues. They look the part!
Willem
-
Thank to all of you.
Yes i'm using "EZ line" elastic tread for all my wwi projects.
It's very usefull and frendly to use material.
-
Superb rigging and weathering! I keep having to remind Myself that this is 1/72nd scale and Not a WNW build!
RAGIII
-
Thank you.
-
Some strings on the tail section:
(https://i.postimg.cc/D0YtyXN8/20220819-121100.jpg) (https://postimg.cc/Wqg95hTv)
(https://i.postimg.cc/mgV6bMFR/20220819-121124.jpg) (https://postimg.cc/k26ys2ch)
(https://i.postimg.cc/Sx5C7NBC/20220819-121153.jpg) (https://postimg.cc/hXLXKgPt)
(https://i.postimg.cc/pXcFRLX4/20220819-121205.jpg) (https://postimg.cc/kB84y9Sv)
(https://i.postimg.cc/ydGM7RtW/20220819-121218.jpg) (https://postimg.cc/k6x1c2nd)
(https://i.postimg.cc/PqJhhdJ3/20220819-121239.jpg) (https://postimg.cc/fVG1fnxm)
(https://i.postimg.cc/vmsHdJ9C/20220819-121252.jpg) (https://postimg.cc/fV8hcg8v)
(https://i.postimg.cc/PqXsyT1f/20220819-121303.jpg) (https://postimg.cc/xX44TrsB)
(https://i.postimg.cc/Hnw13xvx/20220819-121320.jpg) (https://postimg.cc/m1gngbsf)
-
I've run out of superlatives to describe this build.
WD
-
Superb rigging and weathering! I keep having to remind Myself that this is 1/72nd scale and Not a WNW build!
RAGIII
I totally agree with Rick!
Willem
-
Thank you, frends.
I was on my weekation in Bulgaria for two weeks.
-
Good day. Continued construction after a long pause. I collected the wings, I turn to the braces. Trying on wings without a glue.
Thank you.
(https://i.postimg.cc/CL1qmXN7/20221001-115511.jpg) (https://postimg.cc/Jtf0hTSH)
(https://i.postimg.cc/htQ7qmN7/20221001-115536.jpg) (https://postimg.cc/0zxNYzk8)
(https://i.postimg.cc/4y3m2Hzy/20221001-115656.jpg) (https://postimg.cc/62DWy3bx)
(https://i.postimg.cc/cJqt1HNk/20221001-115726.jpg) (https://postimg.cc/v4zZ3GT5)
(https://i.postimg.cc/hG9zXBDD/20221001-115734.jpg) (https://postimg.cc/gw2k71LQ)
(https://i.postimg.cc/RF43fDhc/20221001-115800.jpg) (https://postimg.cc/kVYXPwx4)
(https://i.postimg.cc/6pZTPXGr/20221001-122423.jpg) (https://postimg.cc/75xxCj9h)
(https://i.postimg.cc/m2zrcsjv/20221001-161559.jpg) (https://postimg.cc/ppvv73gC)
(https://i.postimg.cc/hvht1WB7/20221001-161615.jpg) (https://postimg.cc/wR8z9r36)
(https://i.postimg.cc/Twdwh5N0/20221001-161626.jpg) (https://postimg.cc/NynYzFc2)
(https://i.postimg.cc/Y2y9q96N/20221001-161638.jpg) (https://postimg.cc/Wtgj5sft)
(https://i.postimg.cc/rmfp4yvk/20221001-161646.jpg) (https://postimg.cc/xJbYDQfx)
(https://i.postimg.cc/HnKsSZYv/20221001-161659.jpg) (https://postimg.cc/JHNL0QBj)
(https://i.postimg.cc/d0KDPx8z/20221001-162506.jpg) (https://postimg.cc/yDv70npP)
(https://i.postimg.cc/FRVLBQ8W/20221001-162531.jpg) (https://postimg.cc/CBd5R9Fk)
-
Those wings look like a lot of work. I bet you will be delighted when they are on, that will be a milestone moment.
Great pleasure to follow.
Alan
-
You absolutely right, Alan.
Thank you.
-
Good day.
Some progress on the port side wings+ rigging.
(https://i.postimg.cc/FFPCP30j/20221010-200249.jpg) (https://postimg.cc/w3mkMtfv)
(https://i.postimg.cc/fRdHTPpK/20221010-200259.jpg) (https://postimg.cc/G4cPXXc8)
(https://i.postimg.cc/CKVcZNVV/20221010-200319.jpg) (https://postimg.cc/0zcYF7Qt)
(https://i.postimg.cc/6QLYCv94/20221010-200337.jpg) (https://postimg.cc/f3ycNkSM)
(https://i.postimg.cc/ZK27mm7n/20221010-205220.jpg) (https://postimg.cc/dLRmRbKc)
(https://i.postimg.cc/1zpYMdKt/20221010-205233.jpg) (https://postimg.cc/Z95c5V2t)
(https://i.postimg.cc/3R891xRS/IMG-20221010-WA0021.jpg) (https://postimg.cc/2qt48mnh)
-
Fantastic Pustota I was reading your thread from the start again, it's really amazing!
-
Bravo Mon Ami.
Tis a stunning build worth bookmarking for those of us with the kit on the shelf in the vague hope that they can aspire to something similar:-[
Paul
-
Fabulous build!
I sold my WNW F2a as I knew I'd never have room to display it - but a 1/72 makes much more sense. But now I can't buy one as I could never aspire to this level of excellence!!!
Sandy
-
You're mad, but I salute you. What a triumph!
-
Thank you guys!
I glad you liked it.
-
Looking mighty fine! Inspiring me to start one of mine.
-
Good luck!
-
Gorgeous.
-
Good day.
Rigging accomplished, wings on their place.
Thank you.
(https://i.postimg.cc/x1hTLJWB/20221017-135031.jpg) (https://postimg.cc/VJ9886sF)
(https://i.postimg.cc/52SW2Hfw/20221017-135040.jpg) (https://postimg.cc/tsJMr4ZT)
(https://i.postimg.cc/QM6LcR9C/20221017-135047.jpg) (https://postimg.cc/mcF6spSW)
(https://i.postimg.cc/FHWGpmZM/20221017-135102.jpg) (https://postimg.cc/ZWNrYGXH)
(https://i.postimg.cc/50GZRLmM/20221017-135110.jpg) (https://postimg.cc/G8F7BBNM)
(https://i.postimg.cc/QtV2m01b/20221017-143033.jpg) (https://postimg.cc/njbScKdj)
(https://i.postimg.cc/g2d1QY3r/20221017-143039.jpg) (https://postimg.cc/2VcHBNcf)
(https://i.postimg.cc/d3yzP3WZ/20221017-143046.jpg) (https://postimg.cc/p5P0KWMP)
(https://i.postimg.cc/BbBBKGbw/20221017-150208.jpg) (https://postimg.cc/xNqzwhKK)
(https://i.postimg.cc/x1D9CDMS/20221017-150219.jpg) (https://postimg.cc/mtwvXnmd)
(https://i.postimg.cc/3Nk3y3t3/20221017-150229.jpg) (https://postimg.cc/q6HPSHfF)
(https://i.postimg.cc/wv7BN5vK/20221017-150242.jpg) (https://postimg.cc/gXbdFZ84)
(https://i.postimg.cc/9MnhHvCK/20221017-150257.jpg) (https://postimg.cc/ZBpgrs9x)
(https://i.postimg.cc/NFZBmZnm/20221017-151916.jpg) (https://postimg.cc/SYLBp1kx)
(https://i.postimg.cc/1Rd9kNzX/20221017-151932.jpg) (https://postimg.cc/Rqc5fhKx)
(https://i.postimg.cc/fLLNFwnY/20221017-151942.jpg) (https://postimg.cc/4KrqHR33)
-
Congratulations on a spectacular build!
I enjoyed every post :)
Willem
-
Thank you!
Wing tip float trestles+ aft hull trestle made from scratch:
(https://i.postimg.cc/prShSspB/20221018-095435.jpg) (https://postimg.cc/RJcZ6Q13)
(https://i.postimg.cc/k4pgMBqJ/20221018-113125.jpg) (https://postimg.cc/Q9c30NFw)
(https://i.postimg.cc/gr9cRQx1/20221018-113142.jpg) (https://postimg.cc/9wpjHxtB)
(https://i.postimg.cc/cH2t9DKB/20221018-113201.jpg) (https://postimg.cc/62VQTff8)
(https://i.postimg.cc/XvvZVMdg/20221018-113621.jpg) (https://postimg.cc/0zL5fBt6)
(https://i.postimg.cc/fT40YrQw/20221018-113643.jpg) (https://postimg.cc/c6mHSTJj)
(https://i.postimg.cc/RZ46DJ0y/20221018-113649.jpg) (https://postimg.cc/tYv41TWN)
(https://i.postimg.cc/QxLj6LMy/20221018-113705.jpg) (https://postimg.cc/fkK4Lrmc)
(https://i.postimg.cc/J0XD9bZV/20221018-122854-2.jpg) (https://postimg.cc/8f1zvfZt)
(https://i.postimg.cc/9XkYKb3S/20221018-122859.jpg) (https://postimg.cc/9zG9qGQt)
(https://i.postimg.cc/268xRXSp/20221018-122904.jpg) (https://postimg.cc/06FS7nSZ)
(https://i.postimg.cc/PJ0bDXzh/20221018-123135.jpg) (https://postimg.cc/SY7zFpvt)
(https://i.postimg.cc/cJGDjm3Z/20221018-123142.jpg) (https://postimg.cc/hXMbQVM3)
(https://i.postimg.cc/yxxn9pMh/20221018-123211.jpg) (https://postimg.cc/K3Xnhfv4)
(https://i.postimg.cc/br1r6qfq/20221018-123223.jpg) (https://postimg.cc/wRT9M8Br)
(https://i.postimg.cc/4dLQJbYY/20221018-123236.jpg) (https://postimg.cc/qhK3wKXr)
(https://i.postimg.cc/kgv8JFZ7/20221018-123250.jpg) (https://postimg.cc/RWqqGf4Y)
-
That’s really looking nice! Great idea with the scratch built trestles. Looking forward to seeing the finish.
-
I agree with all three of Tim's points, excellent progress!
-
Good day.
Scarff ring and guns.
(https://i.postimg.cc/JnWw8zYT/20221023-192946.jpg) (https://postimg.cc/LqvQB2pf)
(https://i.postimg.cc/jd3G5Xkn/20221023-193008.jpg) (https://postimg.cc/xcHspKQ9)
(https://i.postimg.cc/59gcc1B3/20221023-194140.jpg) (https://postimg.cc/w314JCby)
(https://i.postimg.cc/HskqdK3C/20221023-213301.jpg) (https://postimg.cc/XXtHgsT2)
(https://i.postimg.cc/RF1kZxjv/20221023-213314.jpg) (https://postimg.cc/k641TzJH)
(https://i.postimg.cc/6qYFCLWS/20221023-213425.jpg) (https://postimg.cc/ZvvfSNyF)
(https://i.postimg.cc/1zm5QMgn/20221023-213456.jpg) (https://postimg.cc/w1rd5XQg)
-
Those Mini World Scarff gun rings are just a brilliant design. I found them to be relatively easy to assemble and incredibly detailed. Yours are looking wonderful
-
Yes i love them.
-
Those castings are beautiful and your assembly is far cleaner than I expect mine would be. Lovely work!
-
Thank you.
-
Unbelievablely excellent work at such a small scale. Your construction, rigging, paint & weathering are in a league of their own.
Cheers,
Gary
-
I completely agree with Gary: this is an amazing piece of modelling in the One True Scale.
Stephen.
-
Good day.
Rigging accomplished, wings on their place.
Thank you.
(https://i.postimg.cc/x1hTLJWB/20221017-135031.jpg) (https://postimg.cc/VJ9886sF)
"I approve of your color scheme."
(https://i.imgur.com/YViqrlCm.png)
-
Thank you frends.
Here are the guns: (https://i.postimg.cc/tgKQQ0wb/20221027-200551-2.jpg) (https://postimg.cc/R3LbKYvp)
(https://i.postimg.cc/nVvZxznP/20221027-200602-2.jpg) (https://postimg.cc/YjqTftG6)
(https://i.postimg.cc/RhTjHWFC/20221027-202013-2.jpg) (https://postimg.cc/K3RqXvBC)
(https://i.postimg.cc/wBy8GxWF/20221027-202037-2.jpg) (https://postimg.cc/Y4Hs47Bm)
(https://i.postimg.cc/tJHjP0Nk/20221027-202133-2.jpg) (https://postimg.cc/2bTMRKJL)
(https://i.postimg.cc/gcq95TD9/20221027-202150-2.jpg) (https://postimg.cc/QVtnKSwS)
(https://i.postimg.cc/xT52k4JG/20221027-202203-3.jpg) (https://postimg.cc/TpKSFQch)
(https://i.postimg.cc/Cx6p7n4z/20221027-202212-2.jpg) (https://postimg.cc/ZW3QKR2S)
(https://i.postimg.cc/LsZwVCXb/20221027-202223.jpg) (https://postimg.cc/kVqTJyWQ)
(https://i.postimg.cc/cJ9CQJvm/20221027-202223-2.jpg) (https://postimg.cc/VStzwmBr)
-
Props:
(https://i.postimg.cc/Z5Vs7mCY/20221029-182516.jpg) (https://postimg.cc/5XQmyZBD)
(https://i.postimg.cc/NfxdFt88/20221029-183203.jpg) (https://postimg.cc/4mm62rSn)
(https://i.postimg.cc/xdX56bwg/20221029-183212.jpg) (https://postimg.cc/NywRMLfr)
(https://i.postimg.cc/1zbH23PS/20221029-183220.jpg) (https://postimg.cc/4KbVhZm2)
-
Spectacularrrr.
-
Thank you.
-
Brilliant work! I love every detail.
-
The build is finished, see the result in compleated models section, thank you.
-
I missed a bit in the end but must say the entire build and result is awesome!
RAGIII