forum.ww1aircraftmodels.com
Modelers Lounge => The World of Scale Models => Topic started by: kensar on May 10, 2021, 12:33:28 AM
-
After a short foray into the dark side (an automotive project I have going on the side) I have settled on this different subject - the Marine One Presidential helicopter from the early sixties. This bird carried a few US Presidents around and also brought astronauts to the White House.
This 1/48 scale model kit is from Gallery/MRC. It is one of the best looking 'in the box' models I have ever seen. Only WNW surpasses it with photos of the actual aircraft in the instructions. All sprues are in separate plastic bags and the clear parts are also protected in a separated cardboard partition with foam rubber padding around the parts.
I am finding some parts need some adjustment to fit together, but that gives a good fit. This is a very detailed kit with photoetch parts included. I am using a colorized Eduard PE set for the cockpit.
Box art
(https://i.postimg.cc/xTzsF1vn/UH34-Choctaw-01.jpg) (https://postimages.org/)
I have added a few details to the engine area. Gallery did leave out some prominent details.
(https://i.postimg.cc/T1ZtYzXz/UH34-Choctaw-03.jpg) (https://postimages.org/)
(https://i.postimg.cc/25w9F94W/UH34-Choctaw-04.jpg) (https://postimages.org/)
(https://i.postimg.cc/k4YjLVYX/UH34-Choctaw-06.jpg) (https://postimages.org/)
I am using an Eduard PE set in the the cockpit. I'm not certain this is an improvement over the molded plastic details. Details are perfectly printed, but everything is 2-dimensional.
(https://i.postimg.cc/KcVqNMg0/UH34-Choctaw-07.jpg) (https://postimages.org/)
(https://i.postimg.cc/T1ykxRBj/UH34-Choctaw-08.jpg) (https://postimages.org/)
(https://i.postimg.cc/Z5Pw4ssQ/UH34-Choctaw-09.jpg) (https://postimages.org/)
(https://i.postimg.cc/VNYD693k/UH34-Choctaw-10.jpg) (https://postimages.org/)
I have added the collective stick to the left of the seats. This is one major detail that was left out.
So far, I've been enjoying this build. I haven't built a helicopter model in many years.
-
I am constantly surprised by the quality of modern mouldings and the amount of detail in thse kits. However it takes a very good modeller indeed to achieve the finish that you have done. This will be most impressive when finished.
Stephen.
-
Hi Ken ,
This is different . Not the prettiest of helo's but the kit looks not bad at all . Nice job on the engine details with the plumbing . The Eduard PE does add to it , but being 2D everything is flat . What was the detail on the kit parts before the etch parts got added ?
Alexis
-
Excellent construction and painting/ detailing to date Ken! This will be an interesting Model for sure.
RAGIII
-
Thanks for commenting, Stephen, Alexis, and Rick.
The molded detail on the control panels was the typical knobs and switches. This had to be removed to place the Eduard PE parts there. I'm tempted to add the larger knobs back onto the panels using styrene rod.
-
Wow, that engine is a little jewel!
Cheers,
Frank
-
Beautiful detailing as usual, Ken. Your precise, clean work is exceptional.
Cheers,
Gary
-
Superb work! The engine looks great. Nice to see this unusual model. I will follow with interest.
Bye,
Manni
-
A quick update with the ugliest aircraft interior ever made.
I don't think any other colors could clash more.
I've added some gray fleece carpet and curtains.
(https://i.postimg.cc/dVK49MWH/UH34-Choctaw-11.jpg) (https://postimages.org/)
(https://i.postimg.cc/gkhgRcKL/UH34-Choctaw-12.jpg) (https://postimages.org/)
(https://i.postimg.cc/2SFTcHMz/UH34-Choctaw-13.jpg) (https://postimages.org/)
Closing up the fuselage will be happening soon. Then a lot of PE bits to go on the outside.
-
Yup , I agree about the colours , they do clash and those seats don't look like they would be very comfortable for the long haul . But nice clean work Ken and I look forward on seeing the fuselage button up .
Alexis