forum.ww1aircraftmodels.com
WW1 Aircraft Art => Paintings/Drawings/CGI of WW1 aircraft => Topic started by: Jim52 on December 03, 2012, 01:08:32 PM
-
I'm not sure if this is the right place for this. I'm sure that Des will move it to where He
thinks it's best if it's not. A bit of background. Since I wasn't getting any decent job offers,
I decided to go back to school this Fall. That has put an end to just about all my modeling
in plastic. However, my "Final Project" is due in my Solidworks class in a few weeks and I thought
that a WW1 subject would fit the bill and that maybe some of you might want to watch it as
it develops. Here's a screen shot of the lower Fuselage. 1/32nd scale.
(http://i480.photobucket.com/albums/rr169/Jim652/Sopwith%20Baby/Baby0002.jpg)
Jim
-
Jim,
Very interesting project my old friend. Count on me to be following here with a great interest.
Highest Regards,
Gregory Jouette
-
I definitely want to watch this. Explain a bit more if you dont mind. You start with drawings and then you manufacture the project? How, what material etc...enquiring minds want to know...
Steve
-
Thanks, Guys!
Steve,
This is just an end of Semester project to show that my one remaining Brain Cell
has absorbed something! :o Although, I might take it a bit farther and send it off to a
rapid prototyping service for a quote on a short kit....ie: just the fuselage and floats. Today's
a short day at School and I need to get going on this so, look for some more updates later
on today.
Jim
-
Sounds good. Im watching this space for details.
Steve
-
Jim,
That rapid prototyping is something else isn't it. I believe it's fairly expensive though,but what a process. Like Steve I'll be watching this space for details my old friend.
Highest Regards,
Gregory Jouette
-
Interesting Jim, what actual course are you doing at school?
Andrew
-
Sorry for the delay. Things are a bit hectic at the moment! :o
Andrew, I'm headed for a CAD Certificate but may have enough of the
right credits for an AS degree too.
Gregory, We do have a machine at school that I can play with so that will help with the costs.
I do want to get a quote from an outside firm though, just for reference.
Anyway, here's another photo of where I'm at right now. It needs a lot of tweeking in places but,
I think you'll get the general idea. My Instructor is leaving for England Tuesday to visit with his Daughter over
the Holidays so, the pixels are flying! Hopefully, another update over the weekend.
Jim
(http://i480.photobucket.com/albums/rr169/Jim652/Sopwith%20Baby/Baby_003.jpg)
-
Interesting work. So if I understand correctly at a later stage you have the ability to mfg the part created.
Steve
-
Steve,
Basicly, that's correct. Mostly, it's a matter of cost and that's something I'll
look into.
Jim
-
Jim,
Excellent update my old friend. I'm looking forward to watching more of this very interesting project.
Highest Regards,
Gregory Jouette
-
For a 1/32 Sopwith Baby I'll pony up ;)
Steve
-
Steve,
Unfortunately the software is for "Academic use Only". Both AutoDesk
and Dessault both have dire warnings of Heaven sent lightening bolts if their
software is use for commercial purposes. ::) ::) ::) But, if you're serious, I do have
access to AutoCad and might be able to set you up with a set of pattern drawings
over Semester break. I sense that this could work out for me too as my second
semester "Final Project" 8)
Jim
-
OK, School's out for the Semester so here's a small update that I did to celebrate! :)
(http://i480.photobucket.com/albums/rr169/Jim652/Sopwith%20Baby/MainFloat.jpg)
It's just the start of a main float but I wanted to keep up with this.
Jim
-
Another quick update....I got bored this morning so I thought I'd work on the rear float. I realize
that these aren't much to look at so I'll try to get an assembly shot uploaded later today.
Jim
(http://i480.photobucket.com/albums/rr169/Jim652/Sopwith%20Baby/RearFloat.jpg)
-
Jim,
Very interesting update my old friend. This CAD tech is amazing and much more interesting visually than the standard drafting type drawings. Keep up the excellent works my friend.
Highest Regards,
Gregory Jouette
-
Thank you, Gregory! I really do enjoy it. After spending a lot of years as a Machinist, it's
kind of nice to be on the other side of the plotter! :) :) One more update for today. These
old eyes need a break! :o :o
Jim
(http://i480.photobucket.com/albums/rr169/Jim652/Sopwith%20Baby/Baby_004.jpg)
(http://i480.photobucket.com/albums/rr169/Jim652/Sopwith%20Baby/Baby_006.jpg)
-
Outstanding work Jim.
Highest Regards,
Gregory Jouette
-
Very interesting. Im paying close attention to this!!
Steve
-
Thanks Guys! I was in a hurry to get the Fuselage done for my course and there are a
few things that I think need improvement. One's internal and can't be seen but, the other
is the cockpit opening. It's too shallow in the side profile but, that should be an easy fix.
I Hope. ::)
Jim