forum.ww1aircraftmodels.com

WW1 Aircraft Modeling => Under Construction => Topic started by: RAGIII on April 11, 2020, 04:04:06 AM

Title: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 11, 2020, 04:04:06 AM
So nearing completion of the Camel and figure I am starting on My next project. I am joining SPAD mania. I plan to build Three:
#1: Frank Luke 27th Aero Squadron. Using Aviattic Decals and Frank Luke figure. Doing #21 to be different
#2: Eddie Rickenbacker 94th Aero Squadron using the Kit Decals.
#3: A SPAD from Esc. SPA. 3 ( Perhaps Guynemer) but might do another.


(https://i.postimg.cc/cCSwX85v/89614179-3430716503622064-2865170277979914240-o.jpg)


(https://i.postimg.cc/bY934z07/s-l1600.jpg)



(https://i.postimg.cc/ZKhzxKbX/89539576-3430771083616606-8661827448272322560-o.jpg)



(https://i.postimg.cc/m27JN84T/89173238-2590962297891578-5593134754787491840-o-1.jpg)


I need to find or take New Photos of the Aviattic Decals and Parts. I will Post photos of the reference also when I get them taken.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on April 11, 2020, 04:30:56 AM
I will keep an eye on this thread!
One day I want to put Eduards "American Eagles" edition on my bench. I guess I can learn here, which colors to use and watch a great build!

Have a lot of fun (in this crazy times),
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on April 11, 2020, 05:38:53 AM
RAGIII,
I will look forward to watching this and all the other builds of the Hobbycraft Spad. I've a few in the stash.
This is a kit that seems to have been ignored by the aftermarket world except a few bits from Aviatic and Tom's Model Works.

                                                                                                     As my Irish wife would say, "Go on ya boy ya!!"

                                                                                                                                                                 Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on April 11, 2020, 05:57:39 AM
Rick, by any chance are you fitting an alternative windscreen to any of these aeroplanes? My kit is missing one

I can offer a Roden Nieuport style one from a SPAD VII, there might be another one in there too

Otherwise I'll make one

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 11, 2020, 06:59:28 AM
Rick, by any chance are you fitting an alternative windscreen to any of these aeroplanes? My kit is missing one

I can offer a Roden Nieuport style one from a SPAD VII, there might be another one in there too

Otherwise I'll make one

Richard

I will need to check and see what style My chosen subjects have. As I don't have a Photo of Lukes #21 I could perhaps fudge on that one! I have several Roden SPADS so won't need a trade. I will get back ASAP.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 11, 2020, 08:00:52 AM
Thanks Guys. Here are the Reference Photos and also the Aviattic Elite series stuff for Frank Luke.
RAGIII


(https://i.postimg.cc/ZqCkwSrn/92733596-3515896425104071-3888237024099958784-n.jpg)



(https://i.postimg.cc/T3kMjw5B/92864848-3515896498437397-2333098910328815616-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Juan on April 11, 2020, 08:28:10 AM
Fantastic Rick, you are going to be busy.  I love your multiple builds and look forward to your progress.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on April 11, 2020, 09:00:23 AM
This is going to be a great project, will be following along again. Nice multi build to keep you busy in lock down.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on April 12, 2020, 04:07:44 AM
Your multi-builds are always worth following Rick. If I tried that I would be in a muddle before the first evening was out! I will of course being dropping by regularly to keep an ey on how you progress.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 12, 2020, 04:22:27 AM
Fantastic Rick, you are going to be busy.  I love your multiple builds and look forward to your progress.



This is going to be a great project, will be following along again. Nice multi build to keep you busy in lock down.



Your multi-builds are always worth following Rick. If I tried that I would be in a muddle before the first evening was out! I will of course being dropping by regularly to keep an ey on how you progress.

Stephen.


Thanks Guys! It has been a year or so since I did a Dual build so figured I would Make up for the lack  8) Who knows, I may even add a fourth SPAD  :o
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 16, 2020, 07:06:46 AM
So while building three new ones I figured I would go back and fix some Major Mistakes with this one built years ago. Not sure how it will end up painted and what Markings!
RAGIII



(https://i.postimg.cc/nrBQ2fSD/93173457-3528747567152290-3489876874660675584-n.jpg)



(https://i.postimg.cc/CLCqfYqy/93430305-3528747467152300-1436260776296841216-n.jpg)



(https://i.postimg.cc/QCGFHnNx/93655785-3528747507152296-7656084714733699072-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on April 16, 2020, 07:30:22 AM
You need to fix errors on that? It looks fantastic!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 16, 2020, 07:47:39 AM
You need to fix errors on that? It looks fantastic!

Thanks Richie but Yes, Lots of errors! The wing camo is wrong, the rigging doesn't represent the double wood filled wires, and the triangle on the upper fuselage should be red, white and blue!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on April 16, 2020, 09:54:01 AM
Other then the errors rick , you did do a fantastic job on this one  :) Still three on the go .... just remember that the decals don't go all on one plane ! ;)



Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Borsos on April 16, 2020, 06:53:45 PM
Three new planes on the making; well, you don’t loose time, Rick! I am keen on seeing your progress on these as I have one in the stash but couldn’t feel the motivation to think about starting it yet.
Andreas
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on April 17, 2020, 12:26:41 AM
Quite an ambitious project, Rick.  I'll be following along.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: petrov27 on April 17, 2020, 12:30:14 AM
wow yes this is ambitious - the rigging of those double wires and double bays scares me enough for only a single SPAD but good luck and will be following for sure!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lcarroll on April 17, 2020, 05:22:16 AM
Rick,
    A Triple Play??!! ......  and as pointed out by Petrov27 already the rigging ain't "no small walk in the park"! I'm just curious, where do you display all these beauties? You must have a "subscription" to a display case manufacturers line :o!!
Cheers,
Lance
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Vickers on April 17, 2020, 06:47:44 AM
You need to fix errors on that? It looks fantastic!

Thanks Richie but Yes, Lots of errors! The wing camo is wrong, the rigging doesn't represent the double wood filled wires, and the triangle on the upper fuselage should be red, white and blue!
RAGIII

I used to fret over errors on models mostly based on things I didn't know at the time. Sounds to me like all you really need to do is a bit of masking to convert the upper deck marking to tricolor. For my own purposes, unless I'm gonna lay awake about it at night, life is too short to partially disassemble and refinish models and moving on to the next build is a perfectly acceptable option. For what it's worth, I dig your Nungesser SPAD. It looks marvelous!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lcarroll on April 17, 2020, 12:09:26 PM
 Rick, 
     It is very nice and I had the same thought as Vickers, convert that white chevron to a tricolor and it's a wrap! :)
Cheers,
Lance
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 17, 2020, 11:39:18 PM
Other then the errors rick , you did do a fantastic job on this one  :) Still three on the go .... just remember that the decals don't go all on one plane ! ;)



Terri

Thanks Terri. Hopefully I will keep those Decals sorted out  ::)
RAGIII


Three new planes on the making; well, you don’t loose time, Rick! I am keen on seeing your progress on these as I have one in the stash but couldn’t feel the motivation to think about starting it yet.
Andreas

Thanks Andreas. I think Richards and Mike Norriss' builds will be My inspiration so you have several to choose from  8)
 RAGIII


Quite an ambitious project, Rick.  I'll be following along.

I figure this will keep Me busy until the CSM Nieuports come out !
RAGIII

wow yes this is ambitious - the rigging of those double wires and double bays scares me enough for only a single SPAD but good luck and will be following for sure!

I have a "Cunning" plan for the rigging  ;D
RAGIII

Rick,
    A Triple Play??!! ......  and as pointed out by Petrov27 already the rigging ain't "no small walk in the park"! I'm just curious, where do you display all these beauties? You must have a "subscription" to a display case manufacturers line :o!!
Cheers,
Lance

I have room for about 12 more 1/32nd WW1 fighters in MY 2 cases. After that things will get rough  :(
RAGIII

Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 17, 2020, 11:42:22 PM
You need to fix errors on that? It looks fantastic!

Thanks Richie but Yes, Lots of errors! The wing camo is wrong, the rigging doesn't represent the double wood filled wires, and the triangle on the upper fuselage should be red, white and blue!
RAGIII

I used to fret over errors on models mostly based on things I didn't know at the time. Sounds to me like all you really need to do is a bit of masking to convert the upper deck marking to tricolor. For my own purposes, unless I'm gonna lay awake about it at night, life is too short to partially disassemble and refinish models and moving on to the next build is a perfectly acceptable option. For what it's worth, I dig your Nungesser SPAD. It looks marvelous!

Not so much worried about the inaccuracies as looking at an opportunity to at least correct some of them  8)
RAGIII

Rick, 
     It is very nice and I had the same thought as Vickers, convert that white chevron to a tricolor and it's a wrap! :)
Cheers,
Lance

It May end up the way you and Vickers suggest or I might try adding another color to the upper wing at least? Time will tell!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 19, 2020, 08:23:17 AM
I have started the basic interior work on all three SPADS. I am only showing one that I have advanced a bit further on than the other two. Basic Linen and wood done and added the canvas bag to the right side. Still Much to do!
RAGIII



(https://i.postimg.cc/nrqwRx2b/93876254-3536702759690104-3923171274473340928-n.jpg)


(https://i.postimg.cc/C13Qs5js/93822915-3536702813023432-5004551298377318400-n.jpg)



(https://i.postimg.cc/7ZKtQm36/93782784-3536702993023414-614848886527229952-n.jpg)

PS: Looking at My build that was completed years ago you really won't see much if any of that bag  8)

PPS: I based the size of the bag on the box included in the Roden SPAD VII. Seems to work!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on April 19, 2020, 08:58:21 AM
Starting to look Spadly Rick. I like your interpretation of the bag. I have no idea what they would have carried in it.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 19, 2020, 09:11:08 AM
Starting to look Spadly Rick. I like your interpretation of the bag. I have no idea what they would have carried in it.
sp

Thanks SP. I have No Idea either  8) I used a box made of sheet styrene then covered it with dried out lens wipe papers. Painted it a light beige color...Bone White from Valejo.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on April 19, 2020, 11:49:00 PM
Nice wood tones Rick  :)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 19, 2020, 11:52:47 PM
Nice wood tones Rick  :)


Terri

Thanks Terri! Two More to do today!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on April 20, 2020, 07:14:33 AM
Great start Rick!

I have no idea what they would have carried in it.
Could that be for bullet sleeves?
The german aircrafts collects them already in early types (looks like the need more brass and copper). On my actual build Sopwith Dolphins the sleeves are dropped, but some hit the radiators on the side and caused problems. So some Dolphins got tubes for the sleeves on the cockpit sides. A bag would catch them there?
Only a idea ...

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on April 20, 2020, 07:18:47 AM
Thanks for the idea about the lens wipes Rick - another one to put away for possible future use. Good strt  too - but I still do not quite understand why you have to build three simultaneously!

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 20, 2020, 07:35:14 AM
Great start Rick!

I have no idea what they would have carried in it.
Could that be for bullet sleeves?
The german aircrafts collects them already in early types (looks like the need more brass and copper). On my actual build Sopwith Dolphins the sleeves are dropped, but some hit the radiators on the side and caused problems. So some Dolphins got tubes for the sleeves on the cockpit sides. A bag would catch them there?
Only a idea ...

Cheers,
Frank

Good thought but no, the belts were collected in a box up front on later SPAD VII's and XIII's. The shell casings were indeed ejected. I think it was just for carrying items, perhaps luggage or personal gear when moving to a new location. First Aid Maybe? They were large!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 20, 2020, 07:36:20 AM
Thanks for the idea about the lens wipes Rick - another one to put away for possible future use. Good strt  too - but I still do not quite understand why you have to build three simultaneously!

Stephen.

Thanks Stephen! The reason for three is because they are there  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 20, 2020, 08:13:34 AM
The basic wood tones are done in all three now. I will go back and do a little with Tamiya clear yellow and orange...but not much!
RAGIII


(https://i.postimg.cc/26Kdvhjy/94088610-3539406929419687-3165877997982973952-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on April 20, 2020, 08:24:07 AM
Three Spads makes sense in that Spads have a lot of colors and details not too common to other WWI planes. Once you round up all the stuff for one Spad you might as well gather a little extra and do 3 rather than 6 mos or a year later, you have to round up paint and details again.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on April 20, 2020, 07:16:45 PM
Good start Rick, this will be a big test of you organisational skills but I know you'll do a great job! My workbench is a major disaster area, must have a clear up!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 21, 2020, 12:54:48 AM
Three Spads makes sense in that Spads have a lot of colors and details not too common to other WWI planes. Once you round up all the stuff for one Spad you might as well gather a little extra and do 3 rather than 6 mos or a year later, you have to round up paint and details again.
sp

Thanks for the Idea SP! I just used it on Face Book as an answer to why build 3  ::)
RAGIII

Good start Rick, this will be a big test of you organisational skills but I know you'll do a great job! My workbench is a major disaster area, must have a clear up!

Richie you obviously have not seen My bench photos in the thread for show us your work bench.  :P I am not organized at all! I just accidentally move forward...unless I have one of those backward moments!
RAGIII

PS: here is a link to the thread but Mine is after a major cleanup. I mention 4 bags of trash! There is another thread somewhere that shows My bench in its usual status!

https://forum.ww1aircraftmodels.com/index.php?topic=9814.0
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Vickers on April 21, 2020, 02:47:39 AM
3 SPADs is an ambitious endeavor and these are already looking good! I tend to build in pairs, although I've occasionally built 3 or 4 WWII types in parallel. I agree with smperry, it does seem more efficient. Sometimes I almost dread the more tedious tasks like pin washing panel lines on three or four models; I usually end up feeling like Jack Nicholson sitting at a typewriter. I once built an H-75, a Fiat G.50, and a Bf 109G-2 that were all in the same Finnish livery and by the time I was 2/3rd finished with all of the masking I was about ready to just dip the last one into a bucket or black paint and call it recognition model. Discipline and patience, I suppose.

This will be a fun project to watch, RAGIII, and I'll be paying close attention to learn all I can from your build.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on April 21, 2020, 02:59:53 AM
Haha, Rick that is a great thread! I see what you mean, 4 bags of trash on top of that would have looked spectacular. I must add one of mine too although I'm not feeling quite so bad about it now. ;)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 21, 2020, 03:09:52 AM
3 SPADs is an ambitious endeavor and these are already looking good! I tend to build in pairs, although I've occasionally built 3 or 4 WWII types in parallel. I agree with smperry, it does seem more efficient. Sometimes I almost dread the more tedious tasks like pin washing panel lines on three or four models; I usually end up feeling like Jack Nicholson sitting at a typewriter. I once built an H-75, a Fiat G.50, and a Bf 109G-2 that were all in the same Finnish livery and by the time I was 2/3rd finished with all of the masking I was about ready to just dip the last one into a bucket or black paint and call it recognition model. Discipline and patience, I suppose.

This will be a fun project to watch, RAGIII, and I'll be paying close attention to learn all I can from your build.

Thanks for commenting, greatly appreciated!. I have been known to do a Multi build from time to time  ::) Yes they can become trying.
 RAGIII


Haha, Rick that is a great thread! I see what you mean, 4 bags of trash on top of that would have looked spectacular. I must add one of mine too although I'm not feeling quite so bad about it now. ;)

Looking forward to seeing your bench Richie!
RAGIII

PS: I found the original Thread. Sadly Photo Bucket screwed it up! You can still make out My work Bench in it's usual state  ;D

https://forum.ww1aircraftmodels.com/index.php?topic=4133.0
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on April 21, 2020, 03:32:06 AM
The bench pics are up, I knocked a bottle of lacquer thinner over and splashed it over my tripe's cabanes in the process, whoops! :)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 21, 2020, 03:53:33 AM
The bench pics are up, I knocked a bottle of lacquer thinner over and splashed it over my tripe's cabanes in the process, whoops! :)

I  Did that Very thing yesterday, other than the tripe struts. I was lucky to contain the spill before it spread! You need to stop following My Lead  ??? ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on April 21, 2020, 04:06:10 AM
LOL, I won't be rushing to build 3 Spads at once....2 Roden SE5a might be on the cards though. ;)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 22, 2020, 10:59:58 AM
I have started to do a bit of construction and further painting on the first airframe. I have painted some appropriate areas Horizon blue and added the fuel(Oil) line from the tank going forward.
RAGIII


(https://i.postimg.cc/TPSXMK2m/94148724-3544571405569906-740067610070089728-n.jpg)



(https://i.postimg.cc/qv1Twm91/94179164-3544571538903226-17185688864686080-n.jpg)



(https://i.postimg.cc/xCzV09qZ/94711569-3544571472236566-8099576075576672256-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on April 23, 2020, 02:46:02 AM
Some first class modelling going on here Rick....x 3!!!

Stephen
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on April 23, 2020, 03:32:16 AM
Looking good already Rick.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 23, 2020, 03:32:58 AM
Some first class modelling going on here Rick....x 3!!!

Stephen

Thanks Stephen. After checking pictures again on the Memorial Flight SPAD XIII I have made some changes already  ::) Version 2 of the bag is more rectangular than square and I had the piping wrong. I also have given the blue a second coat!
RAGIII


Looking good already Rick.

Thanks Richie!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 23, 2020, 06:15:18 AM
A couple of photos to show todays work. Changed the piping and did a rework of the canvas bag. I also did some more painting. As always still a lot to do!
RAGIII



(https://i.postimg.cc/TYYYyrVx/94485161-3546784145348632-6638591070932303872-n.jpg)



(https://i.postimg.cc/4NL4pmP9/94713359-3546784262015287-3475075871897812992-n.jpg)

PS: Please excuse the Pen in the photo. I added this to show My Non Modeling Friends on Face Book the general size of what I am working on.

PPS: There is some touch up needed where the earlier incorrect Pipe was located and the seat is not attached.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on April 23, 2020, 06:26:42 AM
RAGIII,
Looking good. I'm really enjoying this, or should I say, these builds.

                                                                                      Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: FAf on April 23, 2020, 06:36:43 AM
Good work! I've done some triple and quadruple builds, but never in this scale and certainly not WWI subjects with all that rigging and aligning of wings, etc. You must have a good system in place for organising this!?

Cheers Fredrik
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 23, 2020, 08:39:11 AM
RAGIII,
Looking good. I'm really enjoying this, or should I say, these builds.

                                                                                      Kevin

Thanks Kevin. I appreciate you following along, and of course, the comment!
RAGIII


Good work! I've done some triple and quadruple builds, but never in this scale and certainly not WWI subjects with all that rigging and aligning of wings, etc. You must have a good system in place for organising this!?

Cheers Fredrik

Thank You Fredrik. Greatly appreciated.
RAGIII


So the end of todays painting session. The remaining fuselage halves are painted...save one as I am still not sure if I am doing Guynemers as the third. If I do the panel behind the cockpit on the left side is not there so it would remain Linen. Decisions, Decisions!
RAGIII


(https://i.postimg.cc/V6kg2Zyv/94264608-3547035701990143-7867266710489792512-o.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on April 23, 2020, 09:32:43 AM
Excellent effect with the wood grain Rick , must say you are making good progress on these three . Good for you !  :) But you know , that orange pen isn't to scale ! ;) Now if you can scratch build one ...now we're talking !  ;D


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on April 23, 2020, 10:43:08 AM
Three schmee Rick...you're using mirrors :-)
Well whatever you do, you'll have it down pat by the time you get to #3.
A most ambitious project. You look to have gotten off to a great start. I look forward to seeing your progress. If I time it right you will stay a step or two ahead of my Spad build and I can make use of some of your good ideas.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kkarlsen on April 23, 2020, 04:17:36 PM
Great work Richard, if you don't mind, I will be following your build as I managed to get my hands on a Hobbycraft SPAD XIII

Kent
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: bobs_buckles on April 23, 2020, 05:20:37 PM
Excellent progress, Rick  :o
I'd be happy with one Spad on the flight line...but 3? Now that's just showing off  ;D

Good luck!
vB  ;)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 23, 2020, 10:05:55 PM
Excellent effect with the wood grain Rick , must say you are making good progress on these three . Good for you !  :) But you know , that orange pen isn't to scale ! ;) Now if you can scratch build one ...now we're talking !  ;D


Terri

Thanks Terri! Not going to scratch build a pen...maybe a pencil in the Map Holder  ::)
RAGIII

Three schmee Rick...you're using mirrors :-)
Well whatever you do, you'll have it down pat by the time you get to #3.
A most ambitious project. You look to have gotten off to a great start. I look forward to seeing your progress. If I time it right you will stay a step or two ahead of my Spad build and I can make use of some of your good ideas.
sp

Mirrors, I should have thought of that as it would make this Much easier  ;D Thanks for the comments SP!
RAGIII


Great work Richard, if you don't mind, I will be following your build as I managed to get my hands on a Hobbycraft SPAD XIII

Kent
.

Thanks Kent, Greatly appreciated! Glad you got ahold of a SPAD It lacks in some details but overall is fairly nice. As for Me, I am following Richards and Mikes builds although mine will not be anywhere near to the details !

RAGIII




Excellent progress, Rick  :o
I'd be happy with one Spad on the flight line...but 3? Now that's just showing off  ;D

Good luck!
vB  ;)


Thanks Bob, greatly appreciate your support!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on April 23, 2020, 10:55:24 PM
You are a modelling machine Rick, I'm finding lockdown has meant I'm spending less time at the bench but you are motoring along.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 23, 2020, 10:59:53 PM
You are a modelling machine Rick, I'm finding lockdown has meant I'm spending less time at the bench but you are motoring along.

Thanks Richie. I am Retired so Lockdown has not really been Much of a change for Me  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Juan on April 24, 2020, 01:57:23 AM
The triplets are coming along beautifully Rick.  To quote others, you are a machine.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on April 24, 2020, 02:38:03 AM
You certainly build quickly Rick. Never mind the touching in - when all is done the results are first class in every case.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 24, 2020, 03:36:58 AM
The triplets are coming along beautifully Rick.  To quote others, you are a machine.

Thanks Juan. I am working on the other two cockpit floors today. Trying a couple things differently on these new ones. Hoping it will be easier.
RAGIII


You certainly build quickly Rick. Never mind the touching in - when all is done the results are first class in every case.

Stephen.

Thanks Stephen! I just took a look at My Old build and pretty much nothing can be seen forward of the stick....but as the saying goes, I will know it is there  ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GAJouette on April 24, 2020, 07:50:36 AM
 Rick,
It's always great to see a SPAD under construction,but three at once is amazing. Looking forward to following along my old friend.
Highest Regards,
Gregory Jouette
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on April 24, 2020, 08:05:09 AM
Congratulations on making it to retirement Rick, I love seeing folks make it that far and still have the ability to pursue their interests. I need a Spad in my collection so this is of great interest. I made Eddie Rickenbacker's Spad in 1/72 as a young lad, didn't do any rigging though.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 24, 2020, 12:19:41 PM
Congratulations on making it to retirement Rick, I love seeing folks make it that far and still have the ability to pursue their interests. I need a Spad in my collection so this is of great interest. I made Eddie Rickenbacker's Spad in 1/72 as a young lad, didn't do any rigging though.

I retired in February of 2019  ;D So over a year ago. This is todays progress. All three cockpit floors and piping, control wires etc. are done.

RAGIII


(https://i.postimg.cc/fRB0J7nF/IMG-20200423-190050095.jpg)



(https://i.postimg.cc/jSrTVBDQ/94362638-3549974858362894-8609296046872330240-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on April 24, 2020, 12:42:50 PM
OK, so you have access to Star Trek replicator technology. Why did you stop at three?

Great work Rick and not a drop of oil leakage from all those tanks and pipes. Very clean assemblies.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 24, 2020, 10:11:33 PM
OK, so you have access to Star Trek replicator technology. Why did you stop at three?

Great work Rick and not a drop of oil leakage from all those tanks and pipes. Very clean assemblies.
sp

 ;D

Thanks SP. The hardest part is coming up, making three of the filler pipes hat go up through the fuselage  :o I will also need to add the hammer and do a little weathering.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on April 25, 2020, 07:19:06 AM
Nice work on cockpit parts and I like, that you do slight differences between those individuals.

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 25, 2020, 08:20:22 AM
Nice work on cockpit parts and I like, that you do slight differences between those individuals.

Cheers,
Frank

Thanks Frank. As for the "Slight differences" one is going to be SPAD built, One Bleriot, and one Kelner. Thats My Story and I am sticking to it  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on April 26, 2020, 01:54:46 AM
It's a good story Rick , I believe it ! Excellent progress on the 3 pits , like Frank the slight variations in the tones is very pleasing , well done  :)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 26, 2020, 05:21:06 AM
It's a good story Rick , I believe it ! Excellent progress on the 3 pits , like Frank the slight variations in the tones is very pleasing , well done  :)


Terri

Thanks Terri! I actually have gone back and taken out a couple of the bends in the piping on two of the pit floors. I also started sanding the left fuselage panel off of the third XIII. I decided to go with the conversion to an early model  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 26, 2020, 07:46:22 AM
Most probably won't see the changes but after looking at more photos and Richards build I went back and corrected some of the piping angles on all three floors.( Still not perfect but better to My Eye)  I also added the basic hammer, ( still need to add brackets and maybe tone down the head). I have decided to go forward with doing a Guynemer version of  SPAD XIII so I sanded off the panel on the left fuselage. The total work doesn't look like much but it took up several hours today  8)
RAGIII


(https://i.postimg.cc/HxZrc27n/94887847-3554993454527701-8567033590154526720-n.jpg)


(https://i.postimg.cc/sxMvphpc/95206907-3555001294526917-1985053731531522048-o.jpg)


(https://i.postimg.cc/ZYQ9JwSD/94654954-3554993547861025-3683472955024605184-n.jpg)

PS: I also added an instrument face to the location in front of the rectangular box.
PPS: I like the shape of the Roden SPAD VII seat so having a couple to spare I decided to use them. My SPAD VII kits will be using a seat patterned off of the Eduard PE set.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: PrzemoL on April 26, 2020, 07:54:52 AM
What an efficient little factory you have producing such lovely aircraft! Great progress, Rick.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on April 26, 2020, 07:57:00 AM
Very nice Rick. Are those oil tanks kit parts or scratched? That is a first rate job of sanding away the metal panel. So easy to make a mess of it and you pulled it off perfectly.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 26, 2020, 08:05:47 AM
What an efficient little factory you have producing such lovely aircraft! Great progress, Rick.

Thanks Przemo!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 26, 2020, 08:18:39 AM
Very nice Rick. Are those oil tanks kit parts or scratched? That is a first rate job of sanding away the metal panel. So easy to make a mess of it and you pulled it off perfectly.
sp

Thanks. The oil tanks are kit parts. I had to move the location of the pipes and so forth. Thanks also about the sanding. Still a bit to clean up but I am happy so far!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on April 26, 2020, 08:42:43 AM
It is all looking very good from where I am sitting Rick. At your rate of production they could have made use of your talents in 1918!

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 26, 2020, 08:53:45 AM
It is all looking very good from where I am sitting Rick. At your rate of production they could have made use of your talents in 1918!

Stephen.


Thanks Stephen. I don't think they had Super Glue in 1918  ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on April 26, 2020, 09:43:04 PM
All coming along nicely here.

That hammer is one of the parts that made my 'stop right there!' alarm go off, so my XIII hasn't got one. I notice in the pictures it is connected to a cable, and that there is a cable that goes to the rip off panel on the bottom of the main tank. I wonder if that is the same cable?



Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on April 26, 2020, 10:30:42 PM
All looking very impressive, very neatly painted. Pipework looks great, how neat is your bench now Rick? ;)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 26, 2020, 10:58:36 PM
All coming along nicely here.

That hammer is one of the parts that made my 'stop right there!' alarm go off, so my XIII hasn't got one. I notice in the pictures it is connected to a cable, and that there is a cable that goes to the rip off panel on the bottom of the main tank. I wonder if that is the same cable?



Richard

Thanks Richard. I didn't go as far as trying to shape the handle or the head on the hammer. Just a couple of different sizes of rod glued together. Really won't be seen that much once all is assembled. I will be working on a simple solution to make it look like something is holding the Hammer in place today, as well as the control stick. Then on to the fuselage side detailing  8) At least that is the plan!
RAGIII


All looking very impressive, very neatly painted. Pipework looks great, how neat is your bench now Rick? ;)

Thanks Richie. I will see if I can get a shot of the "Desk" up today  ;D

RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 27, 2020, 02:39:51 AM
Here you go Richie. What My desk looks like this Morning after yesterdays session  :-[
RAGIII


(https://i.postimg.cc/x1VGDhXn/94650510-3557014620992251-17137185799012352-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on April 27, 2020, 02:56:19 AM
Haha, that's a brilliant work space. "Untidier than mine!" I just told Mrs W. She didn't agree. We just spent an hour looking for a small SE5a part, the wood splinters from my propeller whittling caused many oaths to be sworn. ;)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Monty on April 27, 2020, 03:04:22 AM
Looking very good Rick... all three of them! I do like the French blue bits, got to use some of that myself! ATB, Marc
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on April 27, 2020, 03:28:12 AM
Great progress in the Spad factory (didn't know there was one here in NC).  Doing the research on the different variations makes for interesting going.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 27, 2020, 04:39:30 AM
Thanks Guys!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on April 27, 2020, 05:10:40 AM
The far most important tool on the bench seems to be the dark glass bottle on the right side ;D Do not confuse the bottle with thinner!

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 27, 2020, 07:16:00 AM
The far most important tool on the bench seems to be the dark glass bottle on the right side ;D Do not confuse the bottle with thinner!

Cheers,
Frank

Nevr confused a good Black and Tan with thinner  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: jeroen_R90S on April 28, 2020, 02:10:52 AM
Nice work!

I do my modelling on the kitchen table, so I'm forced to clean things up every time I stop modelling! :P
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on April 29, 2020, 10:41:43 AM
Here you go Richie. What My desk looks like this Morning after yesterdays session  :-[
RAGIII


(https://i.postimg.cc/x1VGDhXn/94650510-3557014620992251-17137185799012352-n.jpg)


HOLY COW RICK !


Beside that , those pits continue to get better and better .  ;)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 29, 2020, 10:31:07 PM
Thanks Terri!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 30, 2020, 08:33:06 AM
The first of the three right fuselage halves is almost done. Some touch up and tweaking needed. I have added the Map and holder and bracing wires. Need to do Smoke and Mirrors turnbuckles on the wires. Cockpit floor is resting in place...Like Me  ::)
RAGIII


(https://i.postimg.cc/HkrjWwP3/95245517-3565258730167840-3799017342042636288-n.jpg)



(https://i.postimg.cc/8zxc772G/95435433-3565258803501166-489348142546812928-n.jpg)



(https://i.postimg.cc/9F8rj81r/95495176-3565258870167826-1899433541305892864-n.jpg)



(https://i.postimg.cc/tgDcr69Q/95559924-3565292656831114-8400790850828763136-o.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on April 30, 2020, 11:31:40 AM
Nice job on those details Rick  :)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 30, 2020, 11:12:57 PM
Nice job on those details Rick  :)


Terri

Thanks Terri. I am going to finish the other two today. Then I will do all of the touch up. After that it will be the Seats, seatbelts, and instruments.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on April 30, 2020, 11:24:09 PM
I don't see how you keep going Rick. Once I get done with a section of a model like a cockpit or engine, I'm ready to move on to something else. Last thing i want to do is repeat the same process two more times. I tried a triple build of Breguet Br.14s, one is still sitting on the shelf of Doom.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on April 30, 2020, 11:27:58 PM
Hi Rick!  This is a fascinating build, and I guess a good way to get to things you might otherwise put off (by doing them simultaneously--no excuses once you've committed ;D).  All the pain at once! ;)  I admire your patience and perseverance.  The modeling is top notch too, as your triple cockpits demonstrate.  Well done!

Best regards,

Bob 
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on April 30, 2020, 11:40:52 PM
I don't see how you keep going Rick. Once I get done with a section of a model like a cockpit or engine, I'm ready to move on to something else. Last thing i want to do is repeat the same process two more times. I tried a triple build of Breguet Br.14s, one is still sitting on the shelf of Doom.
sp

Thanks SP. Some things are done at the same time, like the compass for instance. The positive thing is that the first is the hardest. After that one the others "usually" go much faster as I have learned the process.
RAGIII


Hi Rick!  This is a fascinating build, and I guess a good way to get to things you might otherwise put off (by doing them simultaneously--no excuses once you've committed ;D).  All the pain at once! ;)  I admire your patience and perseverance.  The modeling is top notch too, as your triple cockpits demonstrate.  Well done!

Best regards,

Bob 


Thanks Bob! Yes if I built just one the other two would probably remain in the stash forever...if not Longer  ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 01, 2020, 04:20:29 AM
Lovely detailing Rick, despite the untidy work bench you are being so organised and methodical. Really impressive!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 01, 2020, 05:16:21 AM
Lovely detailing Rick, despite the untidy work bench you are being so organised and methodical. Really impressive!

Finished up the added details on the other two right fuselage halves this Morning. Thanks for the comments, very encouraging!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 01, 2020, 10:48:40 AM
Todays session: All three interiors are pretty much done. Next up will be three seats and all of the seat belt/buckles. One fuselage is assembled.
RAGIII


(https://i.postimg.cc/P5021tHm/95410035-3568113559882357-8388887035435286528-n.jpg)



(https://i.postimg.cc/k58wckML/95436579-3568157093211337-1720101476828708864-o.jpg)


(https://i.postimg.cc/yxrFBPYF/95592920-3568113463215700-4754951773641244672-n.jpg)



(https://i.postimg.cc/Jzd4q2Y3/95513060-3568098809883832-2926066334347296768-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 01, 2020, 11:37:25 AM
Looking real good Rick. Those look like pretty decent kits. You've handled the interiors very cleanly, too bad Spads have such tight cockpit openings. I am enjoying following your progress and learning.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: bobs_buckles on May 01, 2020, 07:33:55 PM
Man alive! I never thought I could be topped for modelling myself into a postage stamp, but you win, Rick! LOL

Lovely work on those office spaces  8)

vB
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on May 01, 2020, 09:39:44 PM
Those interiors are looking great, Rick.  Nice detail!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 01, 2020, 10:07:18 PM
Looking real good Rick. Those look like pretty decent kits. You've handled the interiors very cleanly, too bad Spads have such tight cockpit openings. I am enjoying following your progress and learning.
sp

Thanks SP! The Hobby Craft kits are far more basic than WNW but they really aren't bad at all. If one compares they are enlarged versions of the Old Dragon 1/48th kits with the PE parts eliminated. My Main Challenge still lies ahead with the struts and rigging  ::)
RAGIII

Man alive! I never thought I could be topped for modelling myself into a postage stamp, but you win, Rick! LOL

Lovely work on those office spaces  8)

vB

Thanks Von B! I guess any Victory is Good  8)
RAGIII


Those interiors are looking great, Rick.  Nice detail!


Thanks Ken. Greatly appreciated!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on May 01, 2020, 11:48:41 PM
Rick, I hope you used a different maps on the right walls :D
Nice cockpits!

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 01, 2020, 11:58:24 PM
Rick, I hope you used a different maps on the right walls :D
Nice cockpits!

Cheers,
Frank

Thanks Frank, and Yes I used 3 different Maps, Paris, Orleans, and Northern France. No one will be able to tell anything other than they are folded maps  ;D
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 02, 2020, 12:28:58 AM

Thanks Frank, and Yes I used 3 different Maps, Paris, Orleans, and Northern France. No one will be able to tell anything other than they are folded maps  ;D
RAGIII

I'm sure you noticed the map I put in my SPAD XIII is of the exact spot where MvR fell

Richard

(you're not going to go and check, are you???)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 02, 2020, 12:58:03 AM

Thanks Frank, and Yes I used 3 different Maps, Paris, Orleans, and Northern France. No one will be able to tell anything other than they are folded maps  ;D
RAGIII

I'm sure you noticed the map I put in my SPAD XIII is of the exact spot where MvR fell

Richard

(you're not going to go and check, are you???)

I will take your word for it Richard as I don't have magnifiers that strong  :o
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on May 02, 2020, 02:15:01 AM
Lovely interiors Rick - pity about the maps being folded though - the pilots would get lost if they had opened them and then they had blown away. You need to make sure that they are folded with the print on the outside - then we can all check if they are of the areas you mention!

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Monty on May 02, 2020, 02:33:41 AM
Ooh, some really good detailing and neat work, there Rick! These are coming together really well... Regards, Marc.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Borsos on May 02, 2020, 04:36:06 PM
Great work on the interiors, Rick, all look wonderful. I never saw so many SPADs being build like these days. I am keen on seeing how these kits look when finished. Will they all be in American colors or are you going to do a French one as well?
Best regards,
Andreas
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 02, 2020, 09:28:18 PM
Those interiors are fantastic Rick, these little beauties are moving along at quit a tempo!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 02, 2020, 09:33:53 PM
Lovely interiors Rick - pity about the maps being folded though - the pilots would get lost if they had opened them and then they had blown away. You need to make sure that they are folded with the print on the outside - then we can all check if they are of the areas you mention!

Stephen.

Thanks Stephen. Just a single fold so front and back can be read  ::)
RAGIII


Ooh, some really good detailing and neat work, there Rick! These are coming together really well... Regards, Marc.

Thanks Marc. I appreciate the comments!
RAGIII


Great work on the interiors, Rick, all look wonderful. I never saw so many SPADs being build like these days. I am keen on seeing how these kits look when finished. Will they all be in American colors or are you going to do a French one as well?
Best regards,
Andreas

Thanks Andreas. Two Late Models, Rickenbacker ( Bernard built),and Luke (Bleriot built). The third will be an Early XIII as flown by Guynemer.

RAGIII


Those interiors are fantastic Rick, these little beauties are moving along at quit a tempo!

Thanks Richie. I appreciate your comments!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 02, 2020, 10:06:28 PM
All three fuselages are buttoned up. Took a bit longer than I thought it would so still need to start on the seats and instruments.
RAGIII


(https://i.postimg.cc/Y9SmzVx7/95564440-3571854076174972-5980438064974004224-n.jpg)



(https://i.postimg.cc/mrjHMRCV/95800668-3571854202841626-6622450755632627712-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on May 02, 2020, 10:06:59 PM
Looks superb Rick.  Careful---you're making this look easy enough that you might inspire some of us to try a multi-build as well! ;) ;D  Nicely done.

Best regards,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 02, 2020, 10:10:52 PM
You need to have a word with your compass man...

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 02, 2020, 10:27:58 PM
Looks superb Rick.  Careful---you're making this look easy enough that you might inspire some of us to try a multi-build as well! ;) ;D  Nicely done.

Best regards,

Bob

Thanks. Like I said earlier the hard part lies ahead with the struts and rigging!
RAGIII


You need to have a word with your compass man...

Richard

There are 4 dierections figured odds were good that one of the three would be correct  ::) Sometimes I am not too good at alignment of these small details.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on May 02, 2020, 10:47:00 PM
Damn the COVID, full speed ahead!

Your assembly line is in full swing!

Seeing all three next to each other is really cool.

Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 02, 2020, 10:59:06 PM

You need to have a word with your compass man...

Richard

There are 4 dierections figured odds were good that one of the three would be correct  ::) Sometimes I am not too good at alignment of these small details.
RAGIII

Shouldn't they all be pointing the same way when the fuselages are aligned?

Yes, yes - I know - I'll go and do something useful instead....

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 02, 2020, 11:15:59 PM
Damn the COVID, full speed ahead!

Your assembly line is in full swing!

Seeing all three next to each other is really cool.

Thanks Ken. Hoping to get to work on the seats and belts today. All Virus protocols are in place for the Factory workers  ;D
RAGIII



You need to have a word with your compass man...

Richard

There are 4 dierections figured odds were good that one of the three would be correct  ::) Sometimes I am not too good at alignment of these small details.
RAGIII

Shouldn't they all be pointing the same way when the fuselages are aligned?

Yes, yes - I know - I'll go and do something useful instead....

Richard

Funny thing is Richard, that I actually stopped to think when I applied the decals if the red arrow "Had" to be pointed the same direction on all three  ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on May 03, 2020, 01:18:46 AM
RAGIII,
These are really looking nice. I wish I could keep up with your pace.

                                                             Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 03, 2020, 04:59:16 AM
RAGIII,
These are really looking nice. I wish I could keep up with your pace.

                                                             Kevin

Thanks for dropping in and the kind comment Kevin! Things will slow down a bitt when I get to the strut mounting phase  ::)

RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 03, 2020, 07:30:37 AM
I wasn't planning an update today but I couldn't resist placing the seat and other panels on the model for a photo or two. All of that work and not much will be seen as usual  8)
RAGIII


(https://i.postimg.cc/C5KxQhw1/95615092-3572914552735591-8605325603010248704-n.jpg)



(https://i.postimg.cc/3NbxMswZ/95702269-3572914492735597-6812340944940040192-n.jpg)



(https://i.postimg.cc/wv2B2y8Z/95809529-3572914422735604-4424207427486875648-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on May 03, 2020, 07:39:10 AM
Really Rick it is a shame when you show us all of your excellent handiwork in the cockpits and then you go and cover it all up with the blooming pilot's seat!  I know that you know the details are all there, but can anyone else know and appreciate them if they cannot see them?

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 03, 2020, 07:40:28 AM
And here I was kicking myself for forgetting to install the seat belts before I closed the fuselage. I'm chalking it up to "Great minds think alike" :-)
Lookin good Rick
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 03, 2020, 07:45:58 AM
Really Rick it is a shame when you show us all of your excellent handiwork in the cockpits and then you go and cover it all up with the blooming pilot's seat!  I know that you know the details are all there, but can anyone else know and appreciate them if they cannot see them?

Stephen.

It is all part of the Game I guess  8)
RAGIII


And here I was kicking myself for forgetting to install the seat belts before I closed the fuselage. I'm chalking it up to "Great minds think alike" :-)
Lookin good Rick
sp


I hate to disappoint you but the seat and other upper cockpit parts are not glued in place. Just posed for the photos  :-X I do have to admit to doing similar in the past!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 03, 2020, 09:19:38 AM
The seats undergoing painting...as well as the cushions!
RAGIII



(https://i.postimg.cc/V6FXQknP/95887463-3573127189380994-5756076605587849216-o-1.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 03, 2020, 09:25:07 AM
Blimey, those seats look good enough to sit on Rick. :D
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 03, 2020, 09:30:55 AM
Blimey, those seats look good enough to sit on Rick. :D

Thanks Richie
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on May 03, 2020, 09:36:22 AM
Rick, did you take those photos in a museum?!  The seats look to be 1:1.  Beautiful Work!

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 03, 2020, 09:46:26 AM
Rick, did you take those photos in a museum?!  The seats look to be 1:1.  Beautiful Work!

Best,

Bob

Thanks Bob.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 03, 2020, 10:01:59 AM
Real good job with the seats Rick. I have read how things like the cushions are painted so as to show lighting and wear, but I can't visualize it for trying. I can see it and appreciate it, but brush in hand, I'm useless. Way to go X 3.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 03, 2020, 10:14:52 AM
Real good job with the seats Rick. I have read how things like the cushions are painted so as to show lighting and wear, but I can't visualize it for trying. I can see it and appreciate it, but brush in hand, I'm useless. Way to go X 3.
sp


SP, the leather is not difficult. I use a mix of burnt umber and mars brown. I paint it over a base of acrylic. All I do after is add a bit of mars orange on high points and blend.
RAGIII

PS: If I want to make it look a little more worn I will blend in some yellow ochre and white.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on May 03, 2020, 11:29:58 AM
Moving right along with these Rick , seats are shaping up very well so far .


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 03, 2020, 08:45:55 PM
Moving right along with these Rick , seats are shaping up very well so far .


Terri

Thanks Terri!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 04, 2020, 06:57:09 AM
Here is another Update that I really didn't intend to do. I am Very pleased with how the belts turned out on My first SPAD. I used some WW2 Pe and imagination  8) The seat is glued in now. The deck is also glued but of course the photos showing the upper fuselage in place are just placed there.
RAGIII


(https://i.postimg.cc/0QT4HzV8/95772270-3575524415807938-4639309779196444672-n.jpg)



(https://i.postimg.cc/KjtWXmWt/95777240-3575524345807945-7563616336593551360-n.jpg)



(https://i.postimg.cc/KcTw35Y4/95791759-3575524245807955-5507688506442383360-n.jpg)



(https://i.postimg.cc/g2gTbSgt/95814115-3575524822474564-1581829862342000640-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 04, 2020, 08:08:09 AM
Lookin good Rick. Your Hobby Craft Spads seem to fit like my old Revell clunker only dreams about.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 04, 2020, 08:28:07 AM
Lookin good Rick. Your Hobby Craft Spads seem to fit like my old Revell clunker only dreams about.
sp


Thanks SP. Considering the age difference Revelle didn't do too badly!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 04, 2020, 09:01:36 AM
The old bird put a dent in my stock of Squadron Green. I guess that is kinda like Geratol for old models.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Ryan on May 04, 2020, 11:17:52 AM
(https://i.postimg.cc/0QT4HzV8/95772270-3575524415807938-4639309779196444672-n.jpg)
(https://i.postimg.cc/KjtWXmWt/95777240-3575524345807945-7563616336593551360-n.jpg)
(https://i.postimg.cc/KcTw35Y4/95791759-3575524245807955-5507688506442383360-n.jpg)
(https://i.postimg.cc/g2gTbSgt/95814115-3575524822474564-1581829862342000640-n.jpg)

RAGIII, really like that wood tone!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 04, 2020, 10:21:47 PM
Thanks Ryan!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 05, 2020, 12:38:01 AM
The modelling machine is working smoothly through the triple build. Good going Rick, I'm enjoying this multi build epic!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 05, 2020, 01:20:42 AM
The modelling machine is working smoothly through the triple build. Good going Rick, I'm enjoying this multi build epic!


Thanks Richie. I hope to have the other two in the same place today...and Maybe do a few instruments on the deck also.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on May 05, 2020, 01:39:29 AM
You're cruising right along Rick! The pits are most excellent.  I am so looking forward to seeing this three beauties in full livery. 

Best regards,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 05, 2020, 03:20:33 AM
You're cruising right along Rick! The pits are most excellent.  I am so looking forward to seeing this three beauties in full livery. 

Best regards,

Bob

Thanks Bob. I appreciate your comments!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: jeroen_R90S on May 05, 2020, 04:59:17 AM
Looking very nice!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 05, 2020, 06:33:01 AM
Looking very nice!
Thanks for the comment! The other two are now in the same stage of construction.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: gbrivio on May 05, 2020, 06:52:05 AM
I was missing this triple build, you are really doing an excellent work on these. Lovely interiors and a great workflow. Following for next steps.
Ciao
Giuseppe
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 05, 2020, 07:24:08 AM
I was missing this triple build, you are really doing an excellent work on these. Lovely interiors and a great workflow. Following for next steps.
Ciao
Giuseppe

Thanks Giuseppe! Greatly appreciate you dropping by and the positive comment!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GAJouette on May 05, 2020, 01:44:13 PM
 Rick,
Wow the triplets just get better and better my old friend. Looking forward to seeing more.
Highest Regards,
Gregory Jouette
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 05, 2020, 08:53:49 PM
Rick,
Wow the triplets just get better and better my old friend. Looking forward to seeing more.
Highest Regards,
Gregory Jouette

Thanks Old Friend!! It is great to see you back posting again!!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 06, 2020, 08:37:07 AM
Almost done with the three interiors. Just a couple more instruments and some switches left on each. All I can say is don't look too closely as the faces and dials are the right color but are not necessarily correct  ::)
RAGIII


(https://i.postimg.cc/fy4CTwvR/96230004-3580853731941673-2075065878004629504-n.jpg)



(https://i.postimg.cc/gJL4Ww87/96082387-3580853868608326-4438216558539440128-n.jpg)



(https://i.postimg.cc/fyxKV6Hj/96085467-3580853935274986-7838815399717109760-n.jpg)



(https://i.postimg.cc/KYHQw7kL/96130910-3580853988608314-4108143008967294976-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 06, 2020, 09:26:59 AM
Rick
You are displaying a great deal of discipline to keep all three going as closely together as you have them. Makes my head ache thinking about it  :-)
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 06, 2020, 09:36:49 AM
Rick
You are displaying a great deal of discipline to keep all three going as closely together as you have them. Makes my head ache thinking about it  :-)
sp

I don't know about discipline but it takes one day to figure things out on the first one, then one more to do the other two  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on May 06, 2020, 03:54:01 PM
Two albatrosen and now three SPAD's.  Amazing work, mate!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 06, 2020, 08:19:47 PM
Two albatrosen and now three SPAD's.  Amazing work, mate!

THanks for dropping in and the comment!
RAGIII

PS: The SPADS may be joined by their cousin the Nieuport 23 soon  8)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on May 06, 2020, 10:54:41 PM
Rick, your triplets are looking very fine indeed.  This will be a learning experience for me, as I have this kit in the stash.  Carry on!

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 06, 2020, 11:05:20 PM
Rick, your triplets are looking very fine indeed.  This will be a learning experience for me, as I have this kit in the stash.  Carry on!

Best,

Bob

Thanks Bob. I hope you are also following Richards build and have looked through the PDF of the build by Mike Norris!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on May 06, 2020, 11:12:50 PM
I am, and thanks for the .pdf tip Rick!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 06, 2020, 11:27:39 PM
I am, and thanks for the .pdf tip Rick!

You are welcome. My builds show what can be done with basic modeling tools and skills. Mike shows what can be achieved with all of the Bells and Whistles  ;D
RAGIII


PS: A link to Mikes build that gives a link to the PDF: https://forum.ww1aircraftmodels.com/index.php?topic=9691.msg177205#msg177205
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 07, 2020, 02:17:41 AM
Super stuff Rick, an impressive rate of progress, I find getting the fuselage joined to be one of the most worrying steps. You've got this done very neatly....3 times! Definitely earned a black and tan or 1 there!

Would love to see a Nieuport up next. :)

Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 07, 2020, 03:32:30 AM
Super stuff Rick, an impressive rate of progress, I find getting the fuselage joined to be one of the most worrying steps. You've got this done very neatly....3 times! Definitely earned a black and tan or 1 there!

Would love to see a Nieuport up next. :)


Thanks Richie. The fuselage joints will require some filling and sanding but overall I am pleased!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 07, 2020, 08:52:35 AM
Todays Progress:
1. I finished the instrument panel switches on all three upper fuselage parts.
2. I added the last instrument to the right side of one of the SPADS.
3  I began the process of rounding off and converting one of the SPADS wings to the early version
4. I carved My Very first ever strut using a Bamboo skewer. I wonder if I can get 11 more just the same ?

RAGIII


(https://i.postimg.cc/LXJG5795/96285915-3583233518370361-8649773906023940096-n.jpg)



(https://i.postimg.cc/q7MPVqW8/96087914-3583308461696200-2526230077662822400-n.jpg)



(https://i.postimg.cc/qRWS3LqL/96241899-3583233291703717-6034896566660104192-n.jpg)



(https://i.postimg.cc/0jm3dwJq/96233089-3583233595037020-6889489857635155968-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 07, 2020, 10:05:01 AM
Rick
I have used bamboo skewers for years. At the risk of telling Grandpa how to suck eggs, here are a few tips to save some hassle:

In the larger scales, only make one plank out of the the skewer, right out of the center, half the thickness of the plank on either side of the centerline.

Split the plank out of the skewer with a #11 blade. You want it a little thicker than needed. Sand both sides of the plank smooth and end up with the desired thickness.

Sand an airfoil cross section to the plank. (See Harry Woodman's method in his scale models in plastic card book.)

Make more planks than just enough. You may only get half  the length of the plank usable if the skewer does not split evenly. Don't worry about it, just make enough to compensate and for broken or lost attempts. The skewers come a whole bunch to a pack, so only settle for the best examples.

Cut to length, use some kind of benchmark or jig to ensure they are all exactly the same length and trim ends as per the needs of your model.

Finally drill the ends and insert your favorite pin material. Bamboo grain is like tubes, so it drills real easy. Careful not to poke holes in your fingers.

I finished them with a watercolor pencil and then multiple coats of Pledge, tinted or clear as dictated by the subject. You can also paint them as you would plastic or resin ones,

Bamboo is incredibly strong, being slightly flexible adds to that strength. It is easy to work and looks good, you are going to like it.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on May 07, 2020, 03:20:15 PM
I must try this bamboo strut idea!  Thank you for sharing!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 07, 2020, 05:34:31 PM
Are the Hobbycraft struts that bad? They look quite finely moulded compared to some

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 07, 2020, 09:14:22 PM
I must try this bamboo strut idea!  Thank you for sharing!

Good Luck on your carving. My experimental strut only took about 15 minutes. The real ones will perhaps take longer  ::)
RAGIII


Are the Hobbycraft struts that bad? They look quite finely moulded compared to some

Richard

The kit struts are indeed finely molded. It the shape of the H struts that is troubling. The large indentation on the trailing edge of both front and rear is what bothers me. If the struts have an indentation it is not as prominent as Hobby Craft have Molded it. We will see how things go. I may end up using Alternate Plan B   8)

RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 07, 2020, 09:49:37 PM
Don't the struts neck down to the central fixing? My understanding is the vertical struts are in two parts

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on May 07, 2020, 10:34:10 PM
Excellent job on those instruments, Rick.
I have made struts from coffee stirring sticks.  Don't know what kind of wood they are.  They were a bit flimsy, so I glued two together, then sanded both sides down until I got the thickness I wanted.  With the glue seam in the middle, they are significantly stiffer and stronger.  Then drilled holes in each end for a mounting wire.
Good luck with the struts.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: petrov27 on May 07, 2020, 11:45:29 PM
everything continues to look great!

For the instrument panel details, are the switches from an etched set? Are the instrument bodies parts that come in the kit or scratched?

Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 07, 2020, 11:47:11 PM
Don't the struts neck down to the central fixing? My understanding is the vertical struts are in two parts

Richard

First I think you are correct as to the two part construction. As for the "Neck Down" part again It think you are correct. My question is to what degree? Compare the Hobby Craft H strut to the Roden kit H strut. It is there on the Roden kit but more subdued...or am I imagining things  :o Knowing My skills I May end up going with the kit struts slightly modified or as is !
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 07, 2020, 11:50:47 PM
Excellent job on those instruments, Rick.
I have made struts from coffee stirring sticks.  Don't know what kind of wood they are.  They were a bit flimsy, so I glued two together, then sanded both sides down until I got the thickness I wanted.  With the glue seam in the middle, they are significantly stiffer and stronger.  Then drilled holes in each end for a mounting wire.
Good luck with the struts.

Thanks Ken. Like I have said we shall see how My strut making goes!
RAGIII


everything continues to look great!

For the instrument panel details, are the switches from an etched set? Are the instrument bodies parts that come in the kit or scratched?



Thanks Patrick. The switches were made from wire. I cut some bezels and used the pieces to sort of represent the surroundin parts. As for the instruments they are a combination of kit parts, sprue backings, and some have PE bezels. The faces are Airscale.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 08, 2020, 12:46:09 AM
I suspect you are running into a real world physics/model world thing.

My bet is the real struts (these are not struts of course) were actually quite thin - far thinner than you can easily injection mould. If I'm right, both kits are compromises, and you are seeing different ways around the problem.

If so, thin struts represent a greater risk than thick ones, likewise thin necks are more risky than thick ones. It's possible the Hobbycraft kit was pushing the technology more than Roden and taking a chance on failed mouldings

I have noticed the Hobbycraft kit tends to be much finer in detail than the Roden ones - the trailing edge of the wing for instance

We need some real-world information to know which is more accurate

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 08, 2020, 01:30:13 AM
I suspect you are running into a real world physics/model world thing.

My bet is the real struts (these are not struts of course) were actually quite thin - far thinner than you can easily injection mould. If I'm right, both kits are compromises, and you are seeing different ways around the problem.

If so, thin struts represent a greater risk than thick ones, likewise thin necks are more risky than thick ones. It's possible the Hobbycraft kit was pushing the technology more than Roden and taking a chance on failed mouldings

I have noticed the Hobbycraft kit tends to be much finer in detail than the Roden ones - the trailing edge of the wing for instance

We need some real-world information to know which is more accurate

Richard

If you have the SPAD XIII Datafile look at the photo on page 31. If not I am attaching a link to Mikes PDF. His strut work and reference  photos are on page 14.

I also find it interesting looking at the seats. I used the Roden seat because it more closely matched the one in the restored Memorial Flight SPAD 13. The seat ends right at the bottom of the Head rest and Pad, blocking the V shaped brace.( Revelles Old 1/28th kit seat is even closer). But looking at the reference photos in Mikes build the seat ends lower and the bracing shows behind. Probably one of those things that could vary by Manufacturer...too late to change Mine Now  ::)
RAGIII

PS: Just checked and the Memorial flight SPAD is Kelner built so at Least Rickenbackers SPAD will be close. Revelle probably used his in Making the 1/28th kit  ;D


http://igavh2.xara.hosting/index_htm_files/Spad13.pdf
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on May 08, 2020, 02:20:34 AM
RAGIII,
Nice looking cockpits. Following these Spad builds are a great help for my future plans. I'd like
to build one on the guise of the 13th, 22nd or 93rd Aero Squadron.

                                             Thanks for posting,
                                                               Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 08, 2020, 02:31:23 AM
RAGIII,
Nice looking cockpits. Following these Spad builds are a great help for my future plans. I'd like
to build one on the guise of the 13th, 22nd or 93rd Aero Squadron.

                                             Thanks for posting,
                                                               Kevin


Thanks Kevin! I hope to see your builds someday!!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on May 08, 2020, 06:12:19 AM
I am catching up Rick and you have moved so fast that I have had to spend more time than usual doing so! Your instruments are really the bees knees - I forget sometimes just how small these parts are even in this giant scale. I have got to make some for my build shortly and I am not sure than they are going to be anywhere near as good as yours, and mine are going to be much more visible!!

Excellent modelling .... x3!!

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 08, 2020, 06:30:59 AM
Great work on the instruments Rick. Bet you had fun carving the strut, might as well make the rest of them now. The kit parts will still be there if you don't like the results. At this rate you'll have them all made and the wings on in no time! :)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 08, 2020, 07:07:18 AM
Right. I have looked at lots of pictures of SPADS

Those false struts look pretty straight to me

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 08, 2020, 08:02:09 AM
I am catching up Rick and you have moved so fast that I have had to spend more time than usual doing so! Your instruments are really the bees knees - I forget sometimes just how small these parts are even in this giant scale. I have got to make some for my build shortly and I am not sure than they are going to be anywhere near as good as yours, and mine are going to be much more visible!!

Excellent modelling .... x3!!

Stephen.

Thanks Stephen! I am sure with your skills all will be fine with your instruments!
RAGIII


Great work on the instruments Rick. Bet you had fun carving the strut, might as well make the rest of them now. The kit parts will still be there if you don't like the results. At this rate you'll have them all made and the wings on in no time! :)

Thanks Richie! Yes, I will carve a bunch of struts, but I do plan to use the kit supplied outer struts....unless I suddenly get really good at this  8)  Alternate plan "B" is to use card and superglue to fix the kit inner struts.
RAGIII


Right. I have looked at lots of pictures of SPADS

Those false struts look pretty straight to me

Richard

I was afraid you would come to that conclusion  :-X I was sort of hoping fpr the opposite  ;D
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 09, 2020, 06:59:45 AM
Moving along:
1. I added sheet styrene rounded tips to the upper wing of the "Early Guynemer" version  wing  and removed what was necessary from the original "Square" tipped wings. Next process will be to use Milliput , then sand away anything that isn't correct  8)
2. I filled the fuselage seams on two out of three fuselages. One is the early Guynemer fuselage and I sanded a bit more on the removed panel from the left fuselage.

Next will be to fill and sand the third fuselage and work on the lower wing of the Early version.
RAGIII



(https://i.postimg.cc/5NyQFxhn/96298395-3588301367863576-7723460833073692672-n.jpg)



(https://i.postimg.cc/KjqKsVMP/96300317-3588301551196891-7599777830922092544-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on May 09, 2020, 07:17:10 AM
I'm loving this mass production Rick!  The Guynemer wing tips look good.  Keep going! ;D

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 09, 2020, 07:23:24 AM
Excellent looking tip mod Rick.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 09, 2020, 07:39:43 AM
Very neat work on the wing tips Rick,  I'm enjoying seeing the surgery going on.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on May 09, 2020, 07:51:40 AM
This "shelf" for the instruments at the SPAD always looks funny! 8)
your instruments looks fantastic! And very good attention to specific details and differences.

I couldn't build like that. Knowing me, I'd glue the wrong wing to the wrong fuselage ::)

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 09, 2020, 08:06:07 AM
I'm loving this mass production Rick!  The Guynemer wing tips look good.  Keep going! ;D

Best,

Bob


Thanks Bob! The wing tips have a long way to go but I am encouraged up to this point with My work  :o
RAGIII


Excellent looking tip mod Rick.
sp

Thanks SP. ! Like I said above, still a ways to go!
RAGIII


Very neat work on the wing tips Rick,  I'm enjoying seeing the surgery going on.

Thanks Richie!
RAGIII


This "shelf" for the instruments at the SPAD always looks funny! 8)
your instruments looks fantastic! And very good attention to specific details and differences.

I couldn't build like that. Knowing me, I'd glue the wrong wing to the wrong fuselage ::)

Cheers,
Frank

Thanks Frank. There is still a possibility of MY doing just waht you said  :o I must be careful!
RAGIII


Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on May 09, 2020, 10:11:22 AM
At this rate you will have all 3 done in time at all . Have you thought about starting your own production line and sale them  ;)
Fantastic work on those details . Really like the instruments , well done  8)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 09, 2020, 10:41:12 AM
At this rate you will have all 3 done in time at all . Have you thought about starting your own production line and sale them  ;)
Fantastic work on those details . Really like the instruments , well done  8)


Terri

Thanks Terri! I don't think doing these things to sell would be profitable. Maybe Me 109s, but then taht would be dull  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 10, 2020, 07:31:19 AM
A small update.
1. I have added the basic tip conversion to both wings. Final shaping still to be done.
2. I rolled a PE barrel for one of the Vickers. Just resting in place so not lined up. ( I still have need for 4 more Vickers if anybody wants to sell some at a reasonable cost( From WNW Camel, Snipe, or Dolphin).

RAGIII


(https://i.postimg.cc/Kj6sQ5nc/97152166-3590905947603118-4937753359944777728-o.jpg)



(https://i.postimg.cc/2ybK4tLX/96565618-3590906360936410-9112908428644188160-o.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 10, 2020, 07:41:29 AM
That photo etch barrel looks incredible. Hope you can get enough to fully arm the trio.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 10, 2020, 07:53:33 AM
That photo etch barrel looks incredible. Hope you can get enough to fully arm the trio.

Thanks Richie. I happened to have a Part set for the Hobby Craft/ Academy Camel that I won't be using so figured the MGs would work for the SPAD, at least one of them. Hopefully I will find someone that is using Gaspatch Guns for their Camel, Snipe, or Dolphin  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on May 10, 2020, 08:19:14 AM
Your jacket looks great!
I don't find a 1/32 PE set from Part (strange company name), but for 1/48 there is a Vickers only PE set. You can build 12 jackets (4 of each type). But I think this is not available in 1/32.

There are also sets available from Eduard, may be better available for you and much cheaper as Gaspatch:
https://www.scalemates.com/kits/eduard-632067-vickers-mki-wwi-gun--958537
https://www.scalemates.com/kits/eduard-632068-vickers-colt-mki-wwi-gun--967255

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on May 10, 2020, 11:12:44 AM
Indeed, that jacket looks awesome!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on May 10, 2020, 10:08:59 PM
Great work all the way around, Rick.
Just curious, how do you roll the PE for the guns?  I haven't tackled that job yet, but will soon as a Roden Dr.1 is on deck after the Tommy.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 10, 2020, 10:26:11 PM
Great work all the way around, Rick.
Just curious, how do you roll the PE for the guns?  I haven't tackled that job yet, but will soon as a Roden Dr.1 is on deck after the Tommy.

I'm glad Rick used these - I'm using them on my SPAD and I couldn't remember where they came from! I annealed mine and they bend easily

They're a good representation of the French Colt/Vickers with the vents front and rear

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on May 10, 2020, 10:33:38 PM
Ken, I use a set of cheap drills (without thicker shaft at the end) from ebay. The drills are junk, but so I have HSS shafts in 0.1mm steps.
It starts from 0.4mm with 10 drills, for the bigger ones are only 5 included.
They are blacked, so I can use them for hold parts during soldering without the danger that the part is stick to them.

Just my 2 cents,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 11, 2020, 01:33:05 AM
Your jacket looks great!
I don't find a 1/32 PE set from Part (strange company name), but for 1/48 there is a Vickers only PE set. You can build 12 jackets (4 of each type). But I think this is not available in 1/32.

There are also sets available from Eduard, may be better available for you and much cheaper as Gaspatch:
https://www.scalemates.com/kits/eduard-632067-vickers-mki-wwi-gun--958537
https://www.scalemates.com/kits/eduard-632068-vickers-colt-mki-wwi-gun--967255

Cheers,
Frank

Thanks for the LInks Frank. I am going to Make Do with what I have around the stash. I have a couple of Roden Vickers and a Copperstate version. The Roden Jackets are better(Not Great) and I will need to drill the ends out and fabricate the end cover. I will use the Copperstate version with the Gaspatch Vickers 11 mm Balloon Gun that came with the Aviattic Decals so all will have two MGs although they will look slightly different.  I will eventually have to replace the Roden ones in  the Nieuport 24 and 27 but that can wait  ;D
RAGIII[

quote author=GazzaS link=topic=10981.msg205046#msg205046 date=1589073164]
Indeed, that jacket looks awesome!
[/quote]

Thanks, Greatly appreciated.
RAGIII

Great work all the way around, Rick.
Just curious, how do you roll the PE for the guns?  I haven't tackled that job yet, but will soon as a Roden Dr.1 is on deck after the Tommy.


Thanks Ken. I anneal and use My Waldron punch set or steel rod, screwdrivers, drills whatever matches the diameter!
RAGIII

Great work all the way around, Rick.
Just curious, how do you roll the PE for the guns?  I haven't tackled that job yet, but will soon as a Roden Dr.1 is on deck after the Tommy.

I'm glad Rick used these - I'm using them on my SPAD and I couldn't remember where they came from! I annealed mine and they bend easily

They're a good representation of the French Colt/Vickers with the vents front and rear

Richard

Richard is correct! Once annealed they are pretty easy to bend. Not as tricky as Spandaus with all of those holes  8)

RAGIII


Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on May 11, 2020, 05:55:27 AM
I keep getting triple vision when I look in on your thread Rick. I agrre with Frank - if I were to do what you are doing I would be in such a muddle I would give up! I have managed to muddle some wing ribs on my current build as it is, and I am making one model!!

Yours are progressing well though - keep it up!

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on May 11, 2020, 05:58:11 AM
Go Rick Go !  ;)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 11, 2020, 06:51:44 AM
I keep getting triple vision when I look in on your thread Rick. I agrre with Frank - if I were to do what you are doing I would be in such a muddle I would give up! I have managed to muddle some wing ribs on my current build as it is, and I am making one model!!

Yours are progressing well though - keep it up!

Stephen.


You think you have Triple Vision, you should see things from My perspective  :o Thanks, for the comment and I have begun to do a little improvement on the struts. I learned quicklly that even being VERY CAREFUL the best method is to leave the H on the sprue and work from there! I have used "SUper Filla" , Superglue and talcom powder, to change the H strut profile. Working pretty well. I will post photos soon. As for the original trial strut that I cut loose, I broke it in about 4 places even trying to be super careful. I can only hope My repairs work!
RAGIII


Go Rick Go !  ;)


Terri

Thanks T!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on May 11, 2020, 06:54:23 AM
Thanks, all, for posting your MG tips.

Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 11, 2020, 06:59:42 AM
Thanks, all, for posting your MG tips.

For My Part, You are Welcome!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 11, 2020, 07:52:51 AM
Here is the promised Photo of the Strut re shaping:
RAGIII




(https://i.postimg.cc/sxc83sJh/96593952-3593721187321594-5946398615202168832-o.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 11, 2020, 08:06:53 AM
Very nice, the parts weren't too bad, but refining them will do wonders for the overall impression of the finished models. Tedious time well spent.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 11, 2020, 08:22:57 AM
Very nice, the parts weren't too bad, but refining them will do wonders for the overall impression of the finished models. Tedious time well spent.
sp

Thanks SP. I wish I had thought of taking a before photo. The ones on the sprue have been refined also so only those who have the kit will see a difference  :o
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 11, 2020, 08:32:25 AM
I had the kit, but traded it off a while back. I noticed the difference.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 12, 2020, 04:18:55 AM
I had the kit, but traded it off a while back. I noticed the difference.
sp

Just make sure Richard knows it wasn't Me on the receiving end...this time. Speaking of receiving... time for a New Thread  8)


(https://i.postimg.cc/5tC3z2qL/97263321-3595907017103011-5716399693412433920-o.jpg)

RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 12, 2020, 06:17:41 AM
Nice Rick, that the new CSM kit?
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 12, 2020, 07:23:38 AM
Nice Rick, that the new CSM kit?

Yes it is the New CSM kit! Also a NIce French Pilot figure  ;D
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 13, 2020, 08:48:18 AM
The last couple of bench sessions have been dealing with the early wing tip conversion. More difficult than I had thought it would be...Probably My own Fault! That being said I think I am almost there. Some final shaping and filling /sanding still to do!
RAGIII


(https://i.postimg.cc/prZzHBpC/96938347-3598899703470409-1871853627857960960-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on May 13, 2020, 10:41:14 AM
Wing tips are coming along really well so far  :)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 13, 2020, 10:31:31 PM
Wing tips are coming along really well so far  :)


Terri

Thanks Terri!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 13, 2020, 10:35:09 PM
Might have been difficult but they look so good Rick! Time well spent I'd say.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Ryan on May 13, 2020, 10:44:13 PM
Love it.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 13, 2020, 11:15:12 PM
Might have been difficult but they look so good Rick! Time well spent I'd say.

Thanks Richie! I Hope to get the tips done today.
RAGIII


Love it.

Thanks Ryan!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on May 13, 2020, 11:41:45 PM
RAGIII,
It's good to see there is so much interest in your builds. I have a few of these kits in my stash.
It makes one wonder where the molds have ended up. Thanks for posting your progress.

                                                                                                            Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 14, 2020, 12:05:35 AM
RAGIII,
It's good to see there is so much interest in your builds. I have a few of these kits in my stash.
It makes one wonder where the molds have ended up. Thanks for posting your progress.

                                                                                                            Kevin


I am happy that some like watching My processes  8) I also wonder about the Molds. This was IMHO, the best of the Hobby Craft 1/32nd WW1 subjects and has Never been released again by anyone!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on May 14, 2020, 02:26:19 AM
I do like the work that you have done on the wingtips Rick.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: jeroen_R90S on May 15, 2020, 12:43:27 AM
Very nice work -the wing mods look great as well :)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 15, 2020, 07:53:47 AM
I do like the work that you have done on the wingtips Rick.

Stephen.

Thanks Stephen. I must say I have had some frustration in trying to add ribs to the modified section. I may be getting close to something I can accept ::)
RAGIII


Very nice work -the wing mods look great as well :)


Thanks. I am progressing. Today I attached the lower wings to the fuselage on all three. Painting is getting closer  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 16, 2020, 08:52:19 AM
Well, I am getting close to painting on two of the three. The Luke and Rickenbacker SPAD just need some final tweaking before paint. The Guynemer bird is lagging a bit behind...More to convert than I had originally thought  8)
RAGIII


(https://i.postimg.cc/vTC4812m/97272472-3607587772601602-7969824675477848064-n.jpg)



(https://i.postimg.cc/Gmw4Zys7/97603374-3607587642601615-7830925828262199296-n.jpg)



(https://i.postimg.cc/tRcZNfRH/97979712-3607587399268306-1800509217434501120-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 16, 2020, 09:02:13 AM
I'n the wise words of the philosopher Meatloaf - two out of three ain't bad

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 16, 2020, 12:06:42 PM
Way to go Rick! You have done a great job of keeping them all pretty much together. That old Revell kit has about turned me off on Spads. There are several Spad XIIIs I would like on my display shelf and have been hesitating, but those kits look so much more fun to deal with than Ole Big and Clunky.
I am so waiting to see some color on them. (I'm about out of masking ideas for French camo).
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Borsos on May 16, 2020, 05:24:27 PM
Just impressive what you are doing with these kits. They look absolutely wonderful.
Andreas
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 16, 2020, 09:43:22 PM
I'n the wise words of the philosopher Meatloaf - two out of three ain't bad

Richard

 ;D Thanks Richard, those are wise words! The third will get there, it is just taking more than I thought it would.
RAGIII

Way to go Rick! You have done a great job of keeping them all pretty much together. That old Revell kit has about turned me off on Spads. There are several Spad XIIIs I would like on my display shelf and have been hesitating, but those kits look so much more fun to deal with than Ole Big and Clunky.
I am so waiting to see some color on them. (I'm about out of masking ideas for French camo).
sp

Thanks SP! You will be Amazed at my sophisticated Masking Method  8)
RAGIII


Just impressive what you are doing with these kits. They look absolutely wonderful.
Andreas

Thanks ANdreas. Greatly Appreciated!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on May 17, 2020, 07:00:54 AM
What I am I now only seeing double?

These look really good Rick. As others have written, what you are doing with these kits is super in every way (x 3 of course!)

I admire your patience to keep working at three models simultaneously - as I have written before, one at a time is enough for me!

Stephen. 
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 17, 2020, 07:52:33 AM
What I am I now only seeing double?

These look really good Rick. As others have written, what you are doing with these kits is super in every way (x 3 of course!)

I admire your patience to keep working at three models simultaneously - as I have written before, one at a time is enough for me!

Stephen.

As always, thank you Stephen! I worked on the third one today, still applying ribs to wings and started adding some cut outs in the cowling. I also worked on Varying the control surfaces on two of the upper wings.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 17, 2020, 08:45:37 AM
Number three moving forward....at least I hope  ::) Added the ribs which are rough in places, ok, all places, but I will be taping over some so may work out ! By tomorrow all should be ready for paint.
RAGIII


(https://i.postimg.cc/d3rc1TpW/98052103-3611086428918403-5110757859558162432-o.jpg)



(https://i.postimg.cc/Y2WH8J01/98206601-3611087592251620-4269183898652508160-o.jpg)

PS: Looking at the photos I see that My sanding and priming, then sanding really doesn't show much of the ribs...Oh Well, Just as well  ;D I also noticed a chip in the Aileron. This is something I have found pretty easy to fix. Super filler works great to repair thin surfaces!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on May 17, 2020, 01:11:51 PM
RAGIII,
Looks like this will be another great one. Along with
the others two you continue to impress.
                                                          Kevin
           
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 17, 2020, 04:57:30 PM
Another highly productive day done Rick. You really are showing us how to crack on and get things done. This is definitely an example I need to follow you in! :)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 17, 2020, 10:21:58 PM
RAGIII,
Looks like this will be another great one. Along with
the others two you continue to impress.
                                                          Kevin
           

Thanks Kevin. Today's Mission is cutting holes in the Early Model cowling. After that all should be ready for paint....I Hope  ::)
RAGIII


Another highly productive day done Rick. You really are showing us how to crack on and get things done. This is definitely an example I need to follow you in! :)

Thanks Richie. As long as you work at a pace you are enjoying you are going fast enough  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: FAf on May 18, 2020, 01:30:50 AM
Good work! Building in parallel makes sense, but are you planning on painting in parallel as well? I've found that when I've been building several kits at the same time, I've had to go back to one at the time when I started the painting and finishing process.
/Fredrik
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on May 18, 2020, 05:08:12 AM
That's better Rick: I can cope with one model at a time. All this double and triple vision is making my eyes (and brain) hurt!

The ribs look fine to me - making new ones on such small tips cannot be easy but I think that you have cracked it. It looks to me as though that was a right fiddly job too - better out of the way.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 18, 2020, 07:18:31 AM
Good work! Building in parallel makes sense, but are you planning on painting in parallel as well? I've found that when I've been building several kits at the same time, I've had to go back to one at the time when I started the painting and finishing process.
/Fredrik

Thanks Fredrik! As for painting two will be painted at the same time as they share the same colors, if not the same pattern( One being Bleriot built and one Kelner). The third will require separate treatment as it is an early model from the "Yellow" period  8)
RAGIII


That's better Rick: I can cope with one model at a time. All this double and triple vision is making my eyes (and brain) hurt!

The ribs look fine to me - making new ones on such small tips cannot be easy but I think that you have cracked it. It looks to me as though that was a right fiddly job too - better out of the way.

Thanks Stephen. Time for Triple vision as todays session went as planned. All three are at the same stage with just a bit to touch up before painting.  I added the cooling openings to the cowl of the Guynemer bird. Far from perfect but to get it exact would have required removing the shutters and screen area and scratch building replacements. As a Matter of fact in actuality the cowling itself "should have " been replaced as it represents the two piece version with rolled opening.... I really didn't want to go that far! Lazy perhaps but it is My Model  ::)
RAGIII


(https://i.postimg.cc/cHZMJgzT/98170664-3614412751919104-5663482762863050752-n.jpg)



(https://i.postimg.cc/Lsj3RBxn/98048917-3614412378585808-6535014932407123968-n.jpg)




Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on May 18, 2020, 07:45:53 AM
That's some feat of coordination Rick!  I can barely keep track of one model. :o  Looing really nice.  Good luck in the paintshop.  3x there must be a real challenge. 

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 18, 2020, 08:20:41 AM
That's some feat of coordination Rick!  I can barely keep track of one model. :o  Looing really nice.  Good luck in the paintshop.  3x there must be a real challenge. 

Best,

Bob


Thanks Bob, I am getting close to My Happy Place of Painting!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on May 19, 2020, 03:15:22 AM
Oh dear I am confused again.... but not so confused that I cannot see three good models in the making. I doubt whether most observers would know about the finer points of Guynemer's aircraft cowling. I for one would not. What matters most to me is the overall quality of the uild and painting - something you excell at regularly Rick.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 19, 2020, 03:20:11 AM
I doubt whether most observers would know about the finer points of Guynemer's aircraft cowling.

Point of order - he had several

Aeroplanes, not cowls. Although he did have several cowls too, at least one per aeroplane

I'll shut up now...

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 19, 2020, 07:10:08 AM
Oh dear I am confused again.... but not so confused that I cannot see three good models in the making. I doubt whether most observers would know about the finer points of Guynemer's aircraft cowling. I for one would not. What matters most to me is the overall quality of the uild and painting - something you excell at regularly Rick.

Stephen.

Thanks Stephen, greatly appreciated!
RAGIII


I doubt whether most observers would know about the finer points of Guynemer's aircraft cowling.

Point of order - he had several

Aeroplanes, not cowls. Although he did have several cowls too, at least one per aeroplane

I'll shut up now...

Richard

 :D Yes he had Many SPADS but only One XIII, S504 !
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 19, 2020, 07:10:34 AM
Damn!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 19, 2020, 07:27:40 AM
Damn!

 8) ;D


So, I am ready to paint now. On the two camo versions. I am looking at the Mysterious "Ecru"underside  color. WNW suggests a mix of Deck Tan and white. OK that is fine but.... The Kelner factory drawing lists it as light blue grey! So All Opinions will be considered. Let Me know Your thoughts!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 19, 2020, 07:31:15 AM
Excellent as always Rick, really looking forward to seeing some colour on these now. The machine is going along very smoothly!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 19, 2020, 11:48:28 AM
Excellent as always Rick, really looking forward to seeing some colour on these now. The machine is going along very smoothly!

Thanks Richie. I hope No One comes up with a definitive answer to my question as I have Moved forward on My own  8) I used a Mix of Valejo Deck Tan, Light Blue Grey, and White for the Ecru. It is actually hard to tell in persons if the color is a light beige-ish grey or a greyish blue with a hint of beige, or just a light Deck Tan  8)
RAGIII


(https://i.postimg.cc/d3CXWzKH/98593913-3617925498234496-1289012585672212480-n.jpg)



(https://i.postimg.cc/mZ102FFY/98597401-3617925261567853-6666920666626785280-n.jpg)



(https://i.postimg.cc/sDpq5dm1/99059109-3617925421567837-8515985451415240704-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 19, 2020, 11:50:59 AM
That looks like what I have on my Luke Spad.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 19, 2020, 04:49:18 PM
I have gone for one of each, my SPAD VII is brown, the XIII is grey

You can find both on preserved aeroplanes

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on May 19, 2020, 06:35:10 PM
Looking good, Rick!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 19, 2020, 09:56:43 PM
That looks like what I have on my Luke Spad.
sp

It is good to know that Mine will be close to at least one other  8)
RAGIII


I have gone for one of each, my SPAD VII is brown, the XIII is grey

You can find both on preserved aeroplanes

Richard

One of mine will end up in the "Yelow" period scheme.
RAGIII


Looking good, Rick!

Thanks Gaz!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Daryl_Huhtala on May 20, 2020, 12:48:47 AM
I've really learned a lot from this thread to use for my Frank Luke build. Great job Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: bobs_buckles on May 20, 2020, 03:04:02 AM
Wonderful work, Rick  :o
You're motoring away at a great pace - well done!

vB
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 20, 2020, 04:42:36 AM
I've really learned a lot from this thread to use for my Frank Luke build. Great job Richard

Thanks! I am glad My builds are giving you some ideas!
RAGIII

Wonderful work, Rick  :o
You're motoring away at a great pace - well done!

vB

Thanks von B!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: FAf on May 20, 2020, 07:01:14 AM
Good work! However fun it is to follow the building process, this is when it really gets interesting - the painting stage! I have no idea about ecru though - hadn't heard it before today actually.
/Fredrik
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: PrzemoL on May 20, 2020, 07:16:07 AM
I truly admire your strong resolution to build three of these. And the results are just spectacular. Great effort, Rick.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 20, 2020, 08:47:50 AM
Good work! However fun it is to follow the building process, this is when it really gets interesting - the painting stage! I have no idea about ecru though - hadn't heard it before today actually.
/Fredrik

Thanks Fredrik! Tomorrow evening you will most likely see "Ecru" version #2  8)
RAGIII


I truly admire your strong resolution to build three of these. And the results are just spectacular. Great effort, Rick.


Thank You Przemo! This is where I usually have to deal with a disaster of some sort and today was No Exception. I should be back on Track Tomorrow   :-X
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on May 20, 2020, 09:25:47 AM
Man , these are really shaping up awesome so far Rick  :)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on May 20, 2020, 10:12:39 PM
Nice set of triplets, Rick.
Looking forward to seeing some paint on them.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 20, 2020, 10:50:23 PM
Nice set of triplets, Rick.
Looking forward to seeing some paint on them.

Thanks Ken. Like I said I had a Minor Setback yesterday. I noticed that there was a scratch in the paint that looked odd. A little testing showed that the paint was not adhering. I was forced to strip all three(using just a soft cloth and rubbing) ! So I mixed a new batch of "Ecru" using Tamiya paint. I think I have matched this batch pretty well with the Booklet from Aviattic.  So two days lost but Today I will be back on track!

RAGIII


(https://i.postimg.cc/9QjVspSD/99054119-3621526627874383-6074506022079168512-o.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bill_S on May 21, 2020, 12:56:45 AM
Very impressive, Rick! I have a couple of these birds in my "someday" pile. I too got the Aviattic Luke decals - no gun (I bought that separately), but I got the Frank Luke figure.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 21, 2020, 02:50:01 AM
Very impressive, Rick! I have a couple of these birds in my "someday" pile. I too got the Aviattic Luke decals - no gun (I bought that separately), but I got the Frank Luke figure.

Thanks Bill, I appreciate the comment! So I am now back to where I was two Days ago. Both SPADS have had the New Tamiya Ecru Mix painted. One needs some touch up, scratched while handling too soon. Just to be sure I tried to remove more by rubbing and all seems safe  ::)
RAGIII



(https://i.postimg.cc/m2NTMrTc/99004121-3622028524490860-1845199043639115776-n.jpg)



(https://i.postimg.cc/YCdknyGM/99123272-3622028334490879-309361563708424192-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on May 21, 2020, 03:49:41 AM
Oh dear, triple vision agin! My Rick you have really motored through these three but you have not any quality issues are far as finish is concerned (second time that is). I really admire modellers who can follow multiple builds and not make serious errors (as I would do).

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 21, 2020, 04:28:19 AM
Oh dear, triple vision agin! My Rick you have really motored through these three but you have not any quality issues are far as finish is concerned (second time that is). I really admire modellers who can follow multiple builds and not make serious errors (as I would do).

Stephen.

Thanks Stephen, greatly Appreciated!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 21, 2020, 07:59:44 AM
Top persistence Rick, I have thrown in the towel many times after setbacks on builds but you have just rolled up your sleeves and cracked on. The Spads are looking great, really looking forward to seeing more progress on these. Spads ar very purposeful looking fighters, they remind me a little of the P47 Thunderbolt with that big radial engine and robust appearance.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 21, 2020, 08:16:45 AM
Top persistence Rick, I have thrown in the towel many times after setbacks on builds but you have just rolled up your sleeves and cracked on. The Spads are looking great, really looking forward to seeing more progress on these. Spads ar very purposeful looking fighters, they remind me a little of the P47 Thunderbolt with that big radial engine and robust appearance.

Thanks for the comments Richie! This was a minor setback. Like I said removing the paint was easy as it just rubbed off, no stripping agent needed  8) I like the new Ecru color better anyway and I filled a few holes in the under surface of the wings that I had forgotten about. So if all works out well tomorrow I should be able to start painting the upper surfaces!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bill_S on May 21, 2020, 02:38:29 PM
Ecru. Is it a custom mix of Tamiya paints? Could you share your secret formula?
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 21, 2020, 09:29:13 PM
Ecru. Is it a custom mix of Tamiya paints? Could you share your secret formula?


Yes it is VERY Custom   8) Those who have followed My builds in the past know I am a "Seat of the Pants" type Modeler. I can give you a list of the colors I used but as for percentages I have No Idea  ??? I started with TamiyaXF57(Buff) mixed with XF53( Neutral grey, and XF2 (white). I added a little sky grey, more white, then started adding that mix to XF55 Deck tan, More white, ETC. until I came up with a match I liked. I ended up with 4 bottles of various mixes until I hit on the one I used  ::) In the end if I had a bottle of a lighter bluish grey it would probably have been easier. I would start with the Deck Tan, white, and a greyish blue. I Hope this Helps  ;D
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on May 21, 2020, 11:11:41 PM
Looking good Rick!  I liked your description of the custom paint mix operation.  That's probably closer to the truth of the prototype than you might think!  :o  I suspect they sometimes used whatever was on hand to get things done when certain "official" colors ran out or supplies were delayed. 

I am really looking forward to your further painting adventures on this handsome trio.

Best,

Bob 
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 21, 2020, 11:38:05 PM
Looking good Rick!  I liked your description of the custom paint mix operation.  That's probably closer to the truth of the prototype than you might think!  :o  I suspect they sometimes used whatever was on hand to get things done when certain "official" colors ran out or supplies were delayed. 

I am really looking forward to your further painting adventures on this handsome trio.

Best,

Bob

Thanks Bob! Funny thing I was just looking at all of the bottles I had mixed and I am not sure I used the one I originally liked best  :-[ I guess it doesn't matter as I am happy with the results!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on May 22, 2020, 05:46:38 AM
Rick, you made a nice progress! The number of finished models 2020 will be increased by 3 soon  8)
Do you mix much more paint then needed? I hate to mix, because I would never hit the same color again. And if 80% are done, the mixed paint bottle will be empty >:(
So if I stick to original paints the chances are much higher, to get the same color shade with a new bottle.

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Jimbo on May 22, 2020, 06:45:04 AM
Just went through this whole thread Rick, so impressive! Like others I don’t usually do more than 1 at a time, although I imagine a Camel series in my distant future, I have a number of them.  Really enjoying your detailing work and the mods you’ve made to create the Guynemer ship. Question for you and the group: I thought the Hobbycraft kits were re-boxing’s of Roden parts? I have a VII and a XIII in the stash, I’ve always for years loved the lines of the SPADs, with the fat radiator face and the scalloped trailing edges. Any way model on, thanks for sharing!

Jimbo
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: FAf on May 22, 2020, 06:57:17 AM
Like Frank, I find mixing paint a bit scary. But I too like your approach to it. If you're only looking for what you think looks good, then it can't go wrong, can it?!
/Fredrik
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 22, 2020, 08:09:16 AM
Rick, you made a nice progress! The number of finished models 2020 will be increased by 3 soon  8)
Do you mix much more paint then needed? I hate to mix, because I would never hit the same color again. And if 80% are done, the mixed paint bottle will be empty >:(
So if I stick to original paints the chances are much higher, to get the same color shade with a new bottle.

Cheers,
Frank

In answer I tend to mix Far More than I need. I just used some of My Mix from the WNW Salmson that I had left over from years ago  ::)
RAGIII


Just went through this whole thread Rick, so impressive! Like others I don’t usually do more than 1 at a time, although I imagine a Camel series in my distant future, I have a number of them.  Really enjoying your detailing work and the mods you’ve made to create the Guynemer ship. Question for you and the group: I thought the Hobbycraft kits were re-boxing’s of Roden parts? I have a VII and a XIII in the stash, I’ve always for years loved the lines of the SPADs, with the fat radiator face and the scalloped trailing edges. Any way model on, thanks for sharing!

Jimbo


Thanks for the Very Positive Comments! No the Hobby Craft kits are Not a Re boxing of anything Roden. They were actually Enlarged versions of the DML 1/48th scale SPAD XIII with the PE replaced with plastic parts. IHTH,
RAGIII


Like Frank, I find mixing paint a bit scary. But I too like your approach to it. If you're only looking for what you think looks good, then it can't go wrong, can it?!
/Fredrik


Thanks Fredrick. Nothing Scary about mixing because I am using Multiple shades of one color for each mix. I am going to attach photos of the first color of the upper surface Camo. I used at least 4 shades of light green. Some with aluminum added.

RAGIII


(https://i.postimg.cc/8CLnZJfV/99123280-3625232897503756-4450430693909987328-o.jpg)



(https://i.postimg.cc/cHkXxBQN/98845160-3625072924186420-5473446196775223296-n.jpg)



(https://i.postimg.cc/VvVGHjYD/99013574-3625089430851436-6874490874059816960-o-1.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on May 22, 2020, 10:12:32 AM
Moving right along long Rick , looking good  8)



Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 22, 2020, 11:33:02 AM
Moving right along long Rick , looking good  8)



Terri

Thanks Terri!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Jimbo on May 22, 2020, 12:07:04 PM
Quote
Thanks for the Very Positive Comments! No the Hobby Craft kits are Not a Re boxing of anything Roden. They were actually Enlarged versions of the DML 1/48th scale SPAD XIII with the PE replaced with plastic parts. IHTH,
RAGIII

Thanks for the intel, I guess I was thinking of the Trumpeter WWII kits they did. Nice to see paint going down!

Jimbo
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on May 22, 2020, 11:59:49 PM
I really like your light green mix(es) Rick!  Looks very sharp.  Seeing these three in full livery will be a visual treat. ;D 

Best regards,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 23, 2020, 12:31:15 AM
I really like your light green mix(es) Rick!  Looks very sharp.  Seeing these three in full livery will be a visual treat. ;D 

Best regards,

Bob

Thanks Bob! Today's Mission is the tan and dark green!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 23, 2020, 06:11:05 AM
So, I ran out of Tamiya thinner and Lacquer thinner and only got one more color added to the Bleriot and Kelner built SPADS. Going out tomorrow in hopes of getting both but should at least be able to find the Lacquer Thinner at Wal Mart. Probably will need to fine tune the beige areas on the fuselage as the other colors are applied.
RAGIII



(https://i.postimg.cc/MHjjjK03/100041219-3627557723937940-8539432493927890944-o.jpg)



(https://i.postimg.cc/3W50j5n8/100041794-3627558973937815-2908005764939382784-o.jpg)

PS: Although it appeas that there is grey in front of the beige it is lighting. The areas in front of the beige are actually light green!

PPS: The beige has the same Aluminum dope mixture as the green but it is not as evident. Wondering if the darker the color the less it shows  ::)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on May 23, 2020, 06:28:29 AM
RAGIII,
Good luck during your hunt for thinner. I look forward to seeing the next colour you apply.

                                                                                             Happy modeling,
                                                                                                          Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 23, 2020, 06:30:11 AM
RAGIII,
Good luck during your hunt for thinner. I look forward to seeing the next colour you apply.

                                                                                             Happy modeling,
                                                                                                          Kevin

Thanks Kevin. It is a bit frustrating as I should have been able to get the Dark green done today!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 23, 2020, 06:34:51 AM
That is majorly annoying. I sympathize. Air brush ran out of CO2 in the middle of a job, so I know the feeling.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 23, 2020, 07:04:05 AM
That is majorly annoying. I sympathize. Air brush ran out of CO2 in the middle of a job, so I know the feeling.
sp

Well It is annoying but I guess it could be Much worse! Just really wanted to get the other color done today  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 23, 2020, 08:04:16 AM
How annoying but hopefully the hunt for thinner will be successful. The paint is going on very smoothly though and the colours look  fantastic.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 23, 2020, 08:13:23 AM
When you get there, there is something weird about the undercarriage in this kit

The legs are square, the bottom part moulded on the axle is correctly profiled

I've just sorted that on mine

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 23, 2020, 08:18:34 AM
How annoying but hopefully the hunt for thinner will be successful. The paint is going on very smoothly though and the colours look  fantastic.

Thanks Richie. Like I said I am sure I can get Lacquer thinner. I Like the Tamiya X20A better for thinning the paint but the Lacquer thinner works!
RAGIII

When you get there, there is something weird about the undercarriage in this kit

The legs are square, the bottom part moulded on the axle is correctly profiled

I've just sorted that on mine

Richard

Well Damn, Hurry up and post because I can use your insight!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 23, 2020, 08:29:10 AM
Can't find my camera
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 23, 2020, 08:41:17 AM
Can't find my camera

That is NO excuse Richard! I have been using My Phone as My Camera seems to have gone Belly Up    ;D

RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 24, 2020, 08:20:40 AM
I managed to pick up the Lacquer thinner today so I did make some progress. I masked for the Dark Green then sprayed it on both Models. I had mentioned earlier that I had a sophisticated Masking Method, Silly Putty! Just a bit of re shaping needed on some areas but overall it went well!
RAGIII


(https://i.postimg.cc/RV7C1j3q/99404437-3630313683662344-2253392808465399808-n.jpg)



(https://i.postimg.cc/tCQCxX4L/99404437-3630313683662344-2253392808465399808-n-1.jpg)



(https://i.postimg.cc/vHtMxfjV/100477210-3630314136995632-9044975789916815360-n.jpg)



(https://i.postimg.cc/Dfbw0Wnr/99436372-3630313976995648-2373199374999093248-n.jpg)



(https://i.postimg.cc/1tbRMScV/99440885-3630313780329001-7018936297876094976-n-1.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: dr 1 ace on May 24, 2020, 08:23:20 AM
Moving along nicely !

Ed
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 24, 2020, 08:31:27 AM
Moving along nicely !

Ed

Thanks Amigo! By the way photo 3 &4 are Lukes Bleriot built SPAD and #5 will be Rickenbackers Kelner built bird!
RAGIII

One or two more:


(https://i.postimg.cc/vZyr3F3K/100861561-3630430246984021-5226816057808781312-n.jpg)



(https://i.postimg.cc/ht09YyYt/100515708-3630430306984015-4488010459454111744-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 24, 2020, 09:41:35 AM
Looking great Rick! I like the colors and the application is first rate.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 24, 2020, 11:45:55 AM
Looking great Rick! I like the colors and the application is first rate.
sp

Thanks Steven!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: FAf on May 24, 2020, 03:49:18 PM
Good progress! Nice colours, maybe I'll have to build something French...
/Fredrik
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 24, 2020, 09:10:53 PM
Great stuff Rick, loving the colours.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 24, 2020, 10:10:53 PM
Good progress! Nice colours, maybe I'll have to build something French...
/Fredrik

Thanks Fredrik! French aircraft are actually fun to paint  ;D I still have to do some minor re shaping on the pattern and add the brown and black!
RAGIII


Great stuff Rick, loving the colours.

Thanks Richie!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on May 24, 2020, 10:25:53 PM
Painting is moving forward nicely Rick , really liking the colours  :)



Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 25, 2020, 12:18:29 AM
Painting is moving forward nicely Rick , really liking the colours  :)



Terri

Thanks Terri! I hope to finish the colors today...if all goes well  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: gedmundson on May 25, 2020, 12:48:19 AM
Looks great Rick - nice work on the camo.
Cheers,
Gary
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on May 25, 2020, 05:48:22 AM
You have a knack for colours! First you impress me with the great stripes on the Fokker (with the Prussian blue) and now again such a beautiful colour pattern! Brilliant!

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 26, 2020, 12:38:48 AM
Looks great Rick - nice work on the camo.
Cheers,
Gary

Thanks Gary, greatly appreciated!
RAGIII

You have a knack for colours! First you impress me with the great stripes on the Fokker (with the Prussian blue) and now again such a beautiful colour pattern! Brilliant!

Cheers,
Frank

Thanks Frank. All of the colors are now applied. I will need to go back and fix a few things on the patterns, especially the Rickenbacker bird. I found great photos of both sides on Google images, Neither of which were in My Reference books  :(
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on May 26, 2020, 03:23:51 AM
Extremely good colours Rick. I like the simple way in which you mask the edges - simple but effective - my kind of modelling!!

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on May 26, 2020, 03:37:30 AM
I found great photos of both sides on Google images, Neither of which were in My Reference books  :(
That's Murphy's law of modeling!
If you have checked n references before and doing that thing on your model, you will find the opposite immediately after that in reference n+1 ::)

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 26, 2020, 07:53:13 AM
Extremely good colours Rick. I like the simple way in which you mask the edges - simple but effective - my kind of modelling!!

Stephen.


Thanks STephen. I tend to keep things simple on all of My builds. Probably because I don't experiment enough on Fancier solutions  :o
RAGIII




I found great photos of both sides on Google images, Neither of which were in My Reference books  :(
That's Murphy's law of modeling!
If you have checked n references before and doing that thing on your model, you will find the opposite immediately after that in reference n+1 ::)

Cheers,
Frank

Yes Frank, one seldom beats the Law of References! So I have finished the touch up and re do of the patterns. I won't claim 100% accuracy as I still had to make a couple of educated guesses! Next up is painting the cowl rings and rudders then decalling 8)
RAGIII

PS: The First three photos are Luke's Bleriot bird and the others are Rickenbackers Kelner Machine


(https://i.postimg.cc/63SYvDhQ/100103860-3635599489800430-2703844125156835328-n.jpg)



(https://i.postimg.cc/Mpd0BC68/100767802-3635599743133738-7775751248153673728-n.jpg)



(https://i.postimg.cc/qvkXzJdL/100757103-3635599846467061-3919017482752360448-n.jpg)



(https://i.postimg.cc/gcZK7tDv/100616173-3635598986467147-7196794462721277952-n.jpg)



(https://i.postimg.cc/151K10Cb/100659307-3635599399800439-3694820559268347904-n.jpg)



(https://i.postimg.cc/SxrdrXG3/100487211-3635599233133789-3549576799815991296-n.jpg)



(https://i.postimg.cc/FKHZn9WR/100495144-3635599139800465-520208796828565504-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on May 26, 2020, 08:47:35 AM
Looks great with the colors on it, Spadman.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 26, 2020, 10:40:13 AM
Looks great with the colors on it, Spadman.

Thanks Ken.
RAGIII/Spadman
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on May 26, 2020, 10:46:17 AM
Those look spledid Rick!  The colors look right, and very appealing.  You are moving right along with the triplets!

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on May 26, 2020, 12:54:58 PM
Thumbs up Rick ! :) 8)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 26, 2020, 01:38:48 PM
Very nice painting Rick. These are going to be 3 real nice models
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 26, 2020, 05:07:59 PM
Love 'em Rick. The colours are beautiful. Really pressing on with these at an impressive tempo.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 26, 2020, 08:27:51 PM
Those look spledid Rick!  The colors look right, and very appealing.  You are moving right along with the triplets!

Best,

Bob

Thanks for the comments Bob. They are appreciated.
RAGIII




Thumbs up Rick ! :) 8)


Terri

Thanks Terri, Greatly appreciated.
RAGIII



Very nice painting Rick. These are going to be 3 real nice models
sp


Thanks SP! When the paining is done on these SPAD #3 will be in the spray booth.
RAGIII


Love 'em Rick. The colours are beautiful. Really pressing on with these at an impressive tempo.


As always thank You Richie. Once painting is done the tempo will slow down as I start to work with the struts and rigging  :o
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Borsos on May 27, 2020, 12:08:40 AM
A fantastic paint job and great choice of colors!
Andreas
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 27, 2020, 04:20:48 AM
A fantastic paint job and great choice of colors!
Andreas

Thanks Andreas. As I am typing I am almost ready to shoot the rudder and cowling rings.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on May 28, 2020, 02:57:00 AM
Rick I am going to have to ask you to slow down...! I am having real problems (x3) keeping up with you. von Bob is building his Pup at warp speed and you are building three Spads even faster!

Great colours and painting BTW.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 28, 2020, 03:15:19 AM
Rick I am going to have to ask you to slow down...! I am having real problems (x3) keeping up with you. von Bob is building his Pup at warp speed and you are building three Spads even faster!

Great colours and painting BTW.

Stephen.

Thanks Stephen! Like I said to Richie, I think the pace will slow down once I get to the struts and rigging.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 28, 2020, 05:50:49 AM
So all is now painted. I will have to adjust the width of the white stripe on the rudders as I was just a tad off  ??? Just in case someone wonders about the French blue stripe leading off on the Rickenbacker SPAD it was indeed this way when received. It also had Rickenbackers full markings before the stripe was changed to the blue on the trailing edge of the rudder. Next up clear gloss then applying the markings.
RAGIII



(https://i.postimg.cc/XNRsrwsk/99431457-3640710105956035-8018905263929032704-n.jpg)



(https://i.postimg.cc/13HB7bsv/100478054-3640709855956060-1625621464856133632-n.jpg)



(https://i.postimg.cc/NfRpm5Vq/100046105-3640709679289411-8471687266098479104-n.jpg)



(https://i.postimg.cc/fbqKDX3X/100595696-3640709972622715-2146344584018395136-n.jpg)



(https://i.postimg.cc/wBnmwkyW/101157373-3640709539289425-5723093451482857472-n.jpg)



(https://i.postimg.cc/k4kvtmvg/100621200-3640709772622735-4287448504776785920-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on May 28, 2020, 06:06:25 AM
Oh my, Rick!  Those look gorgeous. ;D  Your colors really turned out nice, and the bleu, blanc et rouge rudder stripes really stand out against the camo.  This is really getting exciting! ;D  Well done.

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on May 28, 2020, 06:08:49 AM
BTW, what do you use for clear gloss and how do you apply it?  Thanks.

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on May 28, 2020, 07:01:44 AM
Awesome looking trio!  You've really done those colors nicely.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 28, 2020, 07:40:29 AM
Oh my, Rick!  Those look gorgeous. ;D  Your colors really turned out nice, and the bleu, blanc et rouge rudder stripes really stand out against the camo.  This is really getting exciting! ;D  Well done.

Best,

Bob

Thanks Bob! Yes, the rudder and cowl ring colors do stand out and add a bit of color interest!
RAGIII

PS: The red and blues were mixed to match the Aviattic colors on their roundels using valejo paints.


BTW, what do you use for clear gloss and how do you apply it?  Thanks.

Best,

Bob

Bob, I gloss coated today. I usually prefer Tamiya Gloss. I didn't have any on hand so I went with Valejo Gloss finish. I also occasionally use Future  8)
RAGIII

Awesome looking trio!  You've really done those colors nicely.

Thanks Gaz! I appreciate your comments! These two are ready for decals. The third should hit the paint booth in a couple of days!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 28, 2020, 07:41:24 AM
A heads up. I've been looking at the Hobbycraft and Roden struts, and it isn't looking good Rick

(http://www.primrose-engineering.co.uk/wp-content/gallery/spad-xiii/DSCF0807.JPG)

Roden SPAD VII on the left, Hobbycraft SPAD XIII on the right

The Hobbycraft ones are impossibly anaemic, I'm going to make new ones

The undercarriages:

(http://www.primrose-engineering.co.uk/wp-content/gallery/spad-xiii/DSCF0804.JPG)

Hobbycraft on the left, Roden on the right. I had to do a lot of profiling to get the legs to looks right

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 28, 2020, 07:46:48 AM
Thanks for the heads up Richard. On the Hobby Craft Gear struts did you add sheet plastic then sand away everything that wasn't correct? As for the wing struts I am going with my earlier semi correction and hoping they hold together. Funny thing is the one I built OOB years ago the struts are very strong once in place, not correct shape but I tried flexing them today and they are pretty solid. So while you are making struts feel free to just do 3 more sets  ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 28, 2020, 07:54:48 AM
No, the Hobbycraft legs are square, they should be roughly aerodynamic so there is plenty to scrape away.

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 28, 2020, 07:59:48 AM
No, the Hobbycraft legs are square, they should be roughly aerodynamic so there is plenty to scrape away.

Richard

Thanks Richard. I will look at sanding the gear struts soon  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 28, 2020, 08:15:54 AM
Nice smooth paint jobs Rick, I really like the French camouflage schemes.

Interesting work ahead with the struts, looking forward to seeing how you solve it. I know you definitely will!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 28, 2020, 08:29:25 AM
Nice smooth paint jobs Rick, I really like the French camouflage schemes.

Interesting work ahead with the struts, looking forward to seeing how you solve it. I know you definitely will!

Thanks Richie. I also Like the French Camo schemes. As for the struts if my plan doesn't work I still have those Bamboo skewers  :o
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on May 28, 2020, 09:25:02 AM
Good luck on the struts Rick , sounds like it will have a few challenges but I know you will overcome and shine ! ;) . I don't think I would do all that sanding/scraping away that much plastic . I would take the lazy way and trace them out on sheet stock
, cut out and shape , clean up as needed . 


Terri

Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 28, 2020, 10:48:23 AM
Good luck on the struts Rick , sounds like it will have a few challenges but I know you will overcome and shine ! ;) . I don't think I would do all that sanding/scraping away that much plastic . I would take the lazy way and trace them out on sheet stock
, cut out and shape , clean up as needed . 


Terri

Thanks Terri! I can only hope you are correct!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 28, 2020, 05:56:41 PM
I don't think I would do all that sanding/scraping away that much plastic . I would take the lazy way and trace them out on sheet stock
, cut out and shape , clean up as needed . 


Terri

If you are referring to the legs, the injected parts were very much like pieces of sheet material to start with

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on May 28, 2020, 11:20:13 PM
RAGIII,
The camo looks just right. I'm sure there will be a new surge of Spads, in all scales, in planing stages due to your inspiration.
Keep the updates coming, they are very informative.

                                                                           Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on May 29, 2020, 02:44:55 AM
Great finished camo on all three, Rick!
The strange struts and rigging forced some social distance between me and those SPAD kits in my stash 8)

I'm sure there will be a new surge of Spads, in all scales, in planing stages due to your inspiration.
So true, Kevin!

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on May 29, 2020, 02:45:45 AM
The camo does look good Rick. Good luck with the struts and u/c legs. Personally I would carve them from thick plastic but it is your call.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: pepperman42 on May 29, 2020, 03:47:35 AM
Just catching up!! Very nice work!!

Steve
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 29, 2020, 05:19:05 AM
Missed the latest until just now.

You might as well make your own struts, you'd have to work hard to make them as bad as the kit parts.

The fishplate detail on the Roden aside, a coat of paint and nobody will notice the U/C struts next to the outstanding Camo and great detailing you have done. You may have spent some time refining them, but you would have easily spent twice the time scratch building them.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 29, 2020, 05:23:35 AM
Thanks Guys your comments keep Me Inspired! Now for a small snag  :-[ I was happily applying decals on the Rickenbacker bird. When I got to the #1 for the Upper Wing I noticed an issue. It is WAY TOO SMALL!! Oddly their box art profile has it correct! As a matter of fact it is even too small for the under side of the bottom wing. So it looks like I will need to do My best to make a Mask. Should be easy , Right  ::)

RAGIII


(https://i.postimg.cc/P5kN71DS/101007063-3643282845698761-1417436686257750016-o.jpg)



(https://i.postimg.cc/MKBvt9nc/100989282-3643283642365348-6840442069849210880-o.jpg)

PS: I took the picture right before removing the Number.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on May 29, 2020, 05:57:09 AM
No problem Rick, you love to paint anyway! ::) ;D  Carry on.

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 29, 2020, 06:22:57 AM
No problem Rick, you love to paint anyway! ::) ;D  Carry on.

Best,

Bob

I do Love painting but making Masks is not My Forte!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 29, 2020, 06:56:48 AM
Rick don't rush into it just yet, I have sent you a message.

Richie
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 29, 2020, 07:12:17 AM
I do Love painting but making Masks is not My Forte!
RAGIII

I'm interested to see how you handle this.

The '1' looks easy. The red line around the edge looks very tricky

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 29, 2020, 07:49:28 AM
Rick don't rush into it just yet, I have sent you a message.

Richie

Thanks Richie. I saw the message and will get back to you! Once the rest of the decalling is done I am going to paint the Guynemer SPAD so no rush on My end  ;D
RAGIII

I do Love painting but making Masks is not My Forte!
RAGIII

I'm interested to see how you handle this.

The '1' looks easy. The red line around the edge looks very tricky

Richard

My thoughts exactly  ::)

RAGIII

On the plus side the Luke aircraft is progressing nicely.
RAGIII



(https://i.postimg.cc/mrFP6R2G/101025120-3643561895670856-8993370392055775232-o.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on May 29, 2020, 08:57:54 AM
I may CA my Revell Spad's box top on permanently.

Looks just great Rick.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 29, 2020, 09:45:04 PM
I may CA my Revell Spad's box top on permanently.

Looks just great Rick.
sp

Thanks SP! Don't even think about making yours a SOD kit! I loved what you were doing to that Old Kit!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: FAf on May 29, 2020, 10:22:03 PM
Amazing speed and results! I really like the colours and you seem to be getting the decals on nicely!
/Fredrik
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on May 29, 2020, 10:22:28 PM

 I loved what you were doing to that Old Kit!
RAGIII

Ditto! If we can help you make progress, I'm up for it

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 29, 2020, 10:40:15 PM
Amazing speed and results! I really like the colours and you seem to be getting the decals on nicely!
/Fredrik


Thanks Fredrik! Greatly appreciated.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: petrov27 on May 29, 2020, 11:02:04 PM
Bummer on that #1 decal! I would be willing to cut a mask for that on my Silhouette cutter and send over if you like?
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 29, 2020, 11:32:47 PM
Bummer on that #1 decal! I would be willing to cut a mask for that on my Silhouette cutter and send over if you like?

Thanks for the offer! I Love this Forum. You are the second one to offer! I will keep you posted. I am going to play with getting the proper size made up on a copying machine later today as both the upper and under surface need to be painted using a mask.
RAGIII

PS: Here is one of the Rickenbacker SPAD:

(https://i.postimg.cc/fyggQhj7/101058575-3645519002141812-7127955968146538496-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on May 30, 2020, 03:07:49 AM
Shame about that numeral Rick. Limey Pilot (Ian B) also had to make white numerals outlined in red for his current build - the problem seems to be contagious!

The other transfer markings look super though.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 30, 2020, 06:21:54 AM
Shame about that numeral Rick. Limey Pilot (Ian B) also had to make white numerals outlined in red for his current build - the problem seems to be contagious!

The other transfer markings look super though.

Stephen.

Thanks Stephen. I hope My efforts turn out as well as Ians work on those #6 decals!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on May 30, 2020, 07:49:56 AM
RAGIII,
The 5 colors really pop when you add the cockades and tail stripes.
                                                                       
                                                                    Fantastic,
                                                                          Kevin 
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on May 30, 2020, 06:15:37 PM
Looks good Rick!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on May 30, 2020, 11:17:59 PM
Nice progress with the decalling Rick  8)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 30, 2020, 11:53:56 PM
RAGIII,
The 5 colors really pop when you add the cockades and tail stripes.
                                                                       
                                                                    Fantastic,
                                                                          Kevin


Thanks Kevin! I appreciate the comment! Yes the colors really look good with the colorful markings!
RAGIII


Looks good Rick!



Thanks Gaz, I always appreciate your support!
RAGIII


Nice progress with the decalling Rick  8)


Terri

Thanks Terri!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on May 31, 2020, 12:21:59 AM
Superb paint and decalling job Rick, this is a beautiful model. Don't worry about the 1 decals. I've got you covered, masks cut and ready to send.   😉
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Juan on May 31, 2020, 02:28:02 AM
Wow Rick, I blinked, and these beauties appeared.  Really enjoy your progress.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 31, 2020, 04:30:50 AM
Superb paint and decalling job Rick, this is a beautiful model. Don't worry about the 1 decals. I've got you covered, masks cut and ready to send.   😉

I greatly appreciate your help Richie, and like I said this Forum and it's Members are Fantastic!
RAGIII


Wow Rick, I blinked, and these beauties appeared.  Really enjoy your progress.

Thanks for dropping by and the Comments!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on May 31, 2020, 05:45:29 AM
On the plus side the Luke aircraft is progressing nicely.
Rick, your beautiful painting of this SPAD will force me to do the Luke aircraft too, out of my "American eagles" SPAD kit. That is 120% clear now!

Thanks!
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on May 31, 2020, 07:51:23 AM
On the plus side the Luke aircraft is progressing nicely.
Rick, your beautiful painting of this SPAD will force me to do the Luke aircraft too, out of my "American eagles" SPAD kit. That is 120% clear now!

Thanks!
Frank

Thanks Frank! If I have inspired a Modeler of your abilities My reason for posting is accomplished!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on June 01, 2020, 12:02:44 AM
The colors came out exceptional!  Looking forward to you getting more parts on.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 01, 2020, 01:20:49 AM
The colors came out exceptional!  Looking forward to you getting more parts on.

Thanks Ken, Greatly appreciated!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 02, 2020, 08:07:56 AM
So all of the decaling is done. I used the other set of Aviattic Roundels and some spare serial numbers on the Rickenbacker SPAD.
RAGIII



(https://i.postimg.cc/25ZnSFzp/101567562-3654564011237311-3344526393860947968-n.jpg)



(https://i.postimg.cc/CMNk5KVK/101741200-3654564091237303-7555211884459196416-n.jpg)



(https://i.postimg.cc/13TpSY1c/101510108-3654564407903938-4693458424761942016-n.jpg)



(https://i.postimg.cc/pTMzhhTm/101899457-3654564517903927-4410327793993252864-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 02, 2020, 08:14:44 AM
Stunning Rick! Really beautiful, I am becoming a Spad convert very quickly.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on June 02, 2020, 09:33:11 PM
Most excellent Rick , looking forward to the struts now .


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on June 02, 2020, 11:57:40 PM
These beauties are looking wonderful Rick.  Your colors and the decals really work well to create an exciting image.  Makes me want to break out a SPAD kit and have a go! ;)  I suspect we'll see many more SPAD builds on this forum over the next few months as a result of the motivation you are furnishing with your lovely trio.  Very nicely done. ;D

Best regards,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on June 03, 2020, 03:31:45 AM
That top wing looks a bit low...was that an adaptation to improve pilot vision?

Super finish on the Rickenbacker Spad. Looking forward to seeing the other two now.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 03, 2020, 08:15:49 AM
Stunning Rick! Really beautiful, I am becoming a Spad convert very quickly.

Thanks Richie for your continued support and comments!
RAGIII

Most excellent Rick , looking forward to the struts now .


Terri

Thanks T! Greatly appreciated!
RAGIII

These beauties are looking wonderful Rick.  Your colors and the decals really work well to create an exciting image.  Makes me want to break out a SPAD kit and have a go! ;)  I suspect we'll see many more SPAD builds on this forum over the next few months as a result of the motivation you are furnishing with your lovely trio.  Very nicely done. ;D

Best regards,

Bob

Like I always say, if you are inspired My purpose in Posting is achieved!
RAGIII


That top wing looks a bit low...was that an adaptation to improve pilot vision?

Super finish on the Rickenbacker Spad. Looking forward to seeing the other two now.

Stephen.

As always thank you Stephen! By the way the Gaspatch Vickers arrived Yesterday! Thank you so much for the Generosity!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: PrzemoL on June 03, 2020, 11:02:54 PM
Nice and colourful. Great paint job, Rick.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Borsos on June 03, 2020, 11:19:08 PM
Nothing new from my side but „Looking great!“ sorry for being so boring. I kept watching for something I could moan about, but I simply didn’t find anything.  :o
Andreas
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 04, 2020, 04:58:56 AM
Nice and colourful. Great paint job, Rick.

Thanks Przemo, greatly appreciate your kind comments!
RAGIII


Nothing new from my side but „Looking great!“ sorry for being so boring. I kept watching for something I could moan about, but I simply didn’t find anything.  :o

Thanks Andreas! I could point out a few things but I won't  ::)
RAGIII
Andreas
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 04, 2020, 07:15:39 AM
So I have begun to paint the Guynemer SPAD. I started by misting Tamiya white over the ribs. I taped off some of the ribs to represent the noticeably lighter rib tapes seen in photos. Next was a Mottled coat of Tamiya black. The next step will be a thin application of the base coat of beige.
RAGIII


(https://i.postimg.cc/yNhvqm9h/82946661-3660371030656609-324420809969893376-n.jpg)



(https://i.postimg.cc/sXVK3M9k/101760760-3660371170656595-5782305245015048192-n.jpg)



(https://i.postimg.cc/Y2D8wq4P/101862587-3660371247323254-8952604147325075456-n.jpg)



(https://i.postimg.cc/Y003mTP8/101914876-3660371323989913-2619864436344619008-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on June 04, 2020, 08:28:53 AM
RAGIII,
Things are really heating up in the Spad aircraft works. Thanks for the update.

                                                                                                    Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on June 04, 2020, 10:16:11 AM
Shading looks good Rick , not to light or to dark , looking forward on the paint now  8)



Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Vickers on June 04, 2020, 11:48:07 AM
Hey Rick, I just looked at my message folder and see that you responded to my offer for guns long ago. (forehead slap). Looks like Stephen already took care of your needs awhile back, sorry I dropped the ball! Your SPAD project is just awesome. Truly inspiring!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: gbrivio on June 04, 2020, 05:04:19 PM
I've been missing some updates, the trio is looking fantastic. Great paint job on the first two and I'm sure the third will stand as well.
Looking forward to the completed SPADs.
Ciao
Giuseppe
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on June 04, 2020, 07:03:13 PM
Just looking forwards to more camo, Rick!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 04, 2020, 09:23:27 PM
RAGIII,
Things are really heating up in the Spad aircraft works. Thanks for the update.

                                                                                                    Kevin

Thanks for checking in Kevin!
RAGIII


Shading looks good Rick , not to light or to dark , looking forward on the paint now  8)



Terri

Thanks Terri. We shall see how this goes  ???
RAGIII


I've been missing some updates, the trio is looking fantastic. Great paint job on the first two and I'm sure the third will stand as well.
Looking forward to the completed SPADs.
Ciao
Giuseppe

Thanks for the offer and comments! I think I have the Vickers covered but we shall see  8)
RAGIII


I've been missing some updates, the trio is looking fantastic. Great paint job on the first two and I'm sure the third will stand as well.
Looking forward to the completed SPADs.
Ciao
Giuseppe


Thanks Giuseppe!
RAGIII


Just looking forwards to more camo, Rick!

Thanks Gaz. The reason I am trying this technique on #3 is that it will be in the overall beige-ish yellow scheme. I am trying to make it a little less boring  ;D
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 04, 2020, 10:24:44 PM
Nice bit of black basing going on there Rick, sho8ld give you a lovely variety of tone once the main paint scheme is applied.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on June 05, 2020, 03:10:37 AM
I completely agree with Richie - looking forward to seeing the results when the top coats are on.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 05, 2020, 03:46:21 AM
Nice bit of black basing going on there Rick, should give you a lovely variety of tone once the main paint scheme is applied.
::)
Thanks Richie! I appreciate the support!
RAGIII

I completely agree with Richie - looking forward to seeing the results when the top coats are on.

Stephen.

Thanks as always Stephen! I just finished a couple of hours applying the first of the top/base coat. One thing I am finding out is it is difficult for me to decide when enough is enough. If I err I would rather it be to the monotone side than having a blotched black look  ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on June 05, 2020, 06:51:13 AM
Oh, the third one will be a nice addition to the trio with that special painting technique. I can't wait to see it with the top layer!

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 05, 2020, 07:11:56 AM
Oh, the third one will be a nice addition to the trio with that special painting technique. I can't wait to see it with the top layer!

Cheers,
Frank

Thanks Frank. Here is the first coat. Not a great photo and there is more tonal difference than shows. Another very light coat is needed, IMHO  8)
RAGIII


(https://i.postimg.cc/C17YtRSP/101882636-3662969567063422-9139016834756902912-o.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on June 05, 2020, 07:18:30 AM
The colour Looks good, RAGIII. Reminds me of Butterscotch Ice-cream. Suddenly I'm hungry.

                                                                                                                  Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on June 05, 2020, 10:50:42 AM
Great ...thanks Kevin ! Now I have to go out and get some dame ice cream !!!!


Looking good Rick !


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on June 05, 2020, 05:37:15 PM
Nice!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on June 05, 2020, 07:41:54 PM
Guynemer looks really sweet Rick!  What paint are you using for the French cream dope?

The painting has moved right along.  Good luck with all of those struts. :o

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 05, 2020, 10:35:10 PM
The colour Looks good, RAGIII. Reminds me of Butterscotch Ice-cream. Suddenly I'm hungry.

                                                                                                                  Kevin

Thanks! As for the Ice cream.... ;D
RAGIII


Great ...thanks Kevin ! Now I have to go out and get some dame ice cream !!!!


Looking good Rick !


Terri

Thanks Terri!
RAGIII

Nice!

Greatly appreciated Gaz!
RAGIII


Guynemer looks really sweet Rick!  What paint are you using for the French cream dope?

The painting has moved right along.  Good luck with all of those struts. :o

Best,

Bob

Thanks Bob! As for the color mix it started out easy. Tamiya Desert Yellow and Gloss white. I thought it looked too much like a light Desert Yellow so added some of one of My abandoned Ecru mixes  ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on June 06, 2020, 03:13:00 AM
Obviously the photo is deceptive Rick, but from the photo the colours look spot on to me. However I am sure that in natural light you can see the reason why you want to apply a second coat.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 06, 2020, 03:24:13 AM
Liking the colour Rick. When I zoom in I can see some nice tonal variety too. I think it's going to work our beautifully.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 06, 2020, 07:48:11 AM
Obviously the photo is deceptive Rick, but from the photo the colours look spot on to me. However I am sure that in natural light you can see the reason why you want to apply a second coat.

Stephen.
As always thank you for your support!
RAGIII

Liking the colour Rick. When I zoom in I can see some nice tonal variety too. I think it's going to work our beautifully.

Thanks again Richie. Your encouragement keeps Me going !
RAGIII


So here is today's progress. The front of the fuselage has been painted in the "Matching" color used on Non Fabric surfaces. In the beginning they painted a straight line over some fabric areas on the fuselage. Glossed and ready for the next step.
RAGIII

(https://i.postimg.cc/x1c11tp3/101982241-3666010803425965-2313574845531448612-n.jpg)



(https://i.postimg.cc/hjqDMgD2/102286366-3666011243425921-7533919749149544115-n.jpg)



(https://i.postimg.cc/50qxRGjb/102387915-3666010953425950-8443856579928176508-n.jpg[/img[img]https://i.postimg.cc/mgJ2zC0f/102829144-3666011153425930-3912884402854164834-n.jpg)


and all three together:

(https://i.postimg.cc/T1dRM9Wm/102368561-3666050263422019-3661040388653547132-o.jpg)


Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on June 06, 2020, 08:20:16 AM
RAGIII,
Talk about assume work! That trio will really take up some shelf space.
I look forward in wild anticipation for the next updates.

                                                               Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 06, 2020, 09:01:04 AM
RAGIII,
Talk about assume work! That trio will really take up some shelf space.
I look forward in wild anticipation for the next updates.

                                                               Kevin

Thanks Kevin! I appreciate your comments. Still some shelf space left!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on June 06, 2020, 11:30:35 PM
What a great looking trio! You nailed it!
And so fast :o

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: petrov27 on June 06, 2020, 11:58:29 PM
That pic of the three together is really something else - amazing work to get them this far so quick!!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on June 07, 2020, 12:37:10 AM
That cluster of SPADs awaiting assembly at the air park looks just marvelous Rick!  Have at it.  Can't wait for more! 

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on June 07, 2020, 05:27:47 AM
You may have shelf space at the moment Rick, but you will have considerably less in the near future!

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 07, 2020, 05:58:44 AM
What a great looking trio! You nailed it!
And so fast :o

Cheers,
Frank

Thank You very much Frank!
RAGIII


That pic of the three together is really something else - amazing work to get them this far so quick!!


Thanks Patrick, Greatly appreciated!
RAGIII


That cluster of SPADs awaiting assembly at the air park looks just marvelous Rick!  Have at it.  Can't wait for more! 

Best,

Bob


Thanks Bob, Still some painting to do before further construction  8)

RAGIII


You may have shelf space at the moment Rick, but you will have considerably less in the near future!

Stephen.


These three providing they all make it to the end will leave room for 9 more fighters  ;D

 Now having painted the Guynemer bird and glossed them all up I had to deal with another Number issue. Hobby Craft supplies Green Numbers per the book by Norman Franks and Frank Bailey. My French Friends assure Me that they were RED! So.... I used the decals to make My own hand Hewn Masks. I am sure touch up will be needed once sprayed  ::)
RAGIII




(https://i.postimg.cc/SRBPBxMY/102966448-3668623069831405-1443924656253724411-n.jpg)



(https://i.postimg.cc/s2mtMztb/102432315-3668622763164769-3966238521038456782-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 07, 2020, 07:08:52 AM
Bound to need a bit of touch up should work. I have no idea about correct colours but red would much better against the base coat. You need to convince Mrs G that you must have an early birthday present! ;)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 07, 2020, 07:14:29 AM
Bound to need a bit of touch up should work. I have no idea about correct colours but red would much better against the base coat. You need to convince Mrs G that you must have an early birthday present! ;)

I doubt she will be agreeable for a while. I have to take a trip to California on the 17th for My Sons Wedding in Folsom! An unexpected cost  8) It is a good thing that at least these numbers were correctly sized!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 07, 2020, 08:01:41 AM
So, Less touch up than I had feared!
RAGIII


(https://i.postimg.cc/1XytSy1X/102840179-3668874196472959-2547464506388751249-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on June 07, 2020, 10:13:38 AM
RAGIII,
Fine job on the mask for the number. What material did you use?

                                                                                     Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 07, 2020, 11:00:11 AM
RAGIII,
Fine job on the mask for the number. What material did you use?

                                                                                     Kevin

Thanks Kevin. It was Tamiya tape, double layer for strength, placed on a board. Then the copy of the decal was taped over the Tamiya tape. I cut them by hand using a straight edge when possible. The wing number was totally done by hand.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on June 07, 2020, 12:04:16 PM
Really excellent job on the " 2 " 's Rick . Most of the the top wing wing turned out fantastic !


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 07, 2020, 07:58:13 PM
That worked out very well Rick!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Early Bird Fan on June 07, 2020, 08:20:31 PM
the numbers are looking great and all 3 together look superb  8)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 07, 2020, 08:56:54 PM
Really excellent job on the " 2 " 's Rick . Most of the the top wing wing turned out fantastic !


Terri

Thanks Terri! I thought the one on the upper wing would be the hardest but it turned out to be fairly easy!
RAGIII


That worked out very well Rick!

Thanks Richie!
RAGIII

the numbers are looking great and all 3 together look superb  8)

Thanks for looking in and the comments!
RAGIII

One More:


(https://i.postimg.cc/fy5bT1MK/102853133-3668874419806270-894651024356208775-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on June 08, 2020, 05:03:33 AM
Considering that those number masks were cut by hand I think that you can give yourself a very large pat on the back. Now I know who to turn to if I should need some letters/number masks cut in future....!

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 08, 2020, 07:18:09 AM
Considering that those number masks were cut by hand I think that you can give yourself a very large pat on the back. Now I know who to turn to if I should need some letters/number masks cut in future....!

Stephen.

Thanks Stephen, Not sure I am the Mask Master but if things are sized right I can Muddle My way through  ::)


Today I ran a test on the Years Old Hobby Craft Decals( Thanks Mike Norris). The results were great so I went ahead with applying the Stork, Roundels, and rudder decals. I Must Say that I am Impressed with them. Opaque, adhere to detail, and tough!

RAGIII


(https://i.postimg.cc/MTwKXmNP/102760764-3671546982872347-5277538800958458063-n.jpg)

PS: I am also pleased with the Match of red on My numbers to the roundels!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on June 08, 2020, 09:59:47 AM
That looks like Guynemer's SPAD!  Great work Rick. ;D

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 08, 2020, 10:55:36 AM
That looks like Guynemer's SPAD!  Great work Rick. ;D



Best,

Bob

Thanks Bob. Just need to apply the blue center and then seal all of the decals and paint work.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on June 08, 2020, 03:07:44 PM
Looks brilliant, Rick!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on June 08, 2020, 09:33:30 PM
Good job on the painting mask, Rick.
The red color does look like a good match with the decals.
This one's coming together nicely.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 08, 2020, 10:05:53 PM
Looks brilliant, Rick!

Thanks Gaz! Greatly appreciated.
RAGIII

Good job on the painting mask, Rick.
The red color does look like a good match with the decals.
This one's coming together nicely.

Thanks Ken. Todays Mission is the blue centers and finishing the red portion of the ribbon.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 08, 2020, 11:09:17 PM
Awesome job Rick, this is looking beautiful with the decals on.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 09, 2020, 06:41:44 AM
Awesome job Rick, this is looking beautiful with the decals on.

Thanks Richie!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Rookie on June 09, 2020, 05:12:43 PM
These Spads look awesome, great detailing Rick!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: FAf on June 09, 2020, 07:58:14 PM
Ever continuing success! Great work and I found an Eduard Spas XIII that I probably have to build next... Being in this forum is a bit like being a kid in a candy store! 🍬🍬🍬
/Fredrik
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 10, 2020, 12:11:19 AM
These Spads look awesome, great detailing Rick!

Thanks, I appreciate you looking in and commenting!
RAGIII


Ever continuing success! Great work and I found an Eduard Spas XIII that I probably have to build next... Being in this forum is a bit like being a kid in a candy store! 🍬🍬🍬
/Fredrik

Thanks Fredrik! Greatly appreciated. The Eduard kit should be a Treat to build!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Jimbo on June 10, 2020, 03:25:33 AM
Hi Rick;

Wow do these look fabulous! All the bits - colors, camo, decals and especially your home brew masks, just amazing. I’ve always been on the fence about the plain-Jane monochrome SPAD of Guynemers, but you are proving it can absolutely hold its own next to the camo versions. Just so inspiring and fantastic, thanks for sharing!

Jimbo
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: bobs_buckles on June 10, 2020, 04:10:14 AM
Going great guns, Rick!
A pleasure to follow your progress.

I salute you...Sir!

von B  ;)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: jeroen_R90S on June 10, 2020, 04:47:39 AM
I just read through the last pages to catch up, some great progress and the masking turned out very nice indeed!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: NinetythirdLiberator on June 10, 2020, 05:19:40 AM
WOW Rick...can't believe I missed this one.  Stupendous effort and so much work on those markings!  Really looks great.
I think I spend too much time with my scissors...must get out more!

Dan
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 10, 2020, 06:44:43 AM
Hi Rick;

Wow do these look fabulous! All the bits - colors, camo, decals and especially your home brew masks, just amazing. I’ve always been on the fence about the plain-Jane monochrome SPAD of Guynemers, but you are proving it can absolutely hold its own next to the camo versions. Just so inspiring and fantastic, thanks for sharing!

Jimbo

Thanks Jimbo! I am glad you find My builds inspiring. I hope I can finish on a High Note  8)
RAGIII


Going great guns, Rick!
A pleasure to follow your progress.

I salute you...Sir!

von B  ;)

Thanks von B! Always Happy to hear from you  :D
RAGIII


I just read through the last pages to catch up, some great progress and the masking turned out very nice indeed!


Thanks for the comments! Like I said I was pleased with the results. I still have to do a bit of black shadowing on the fuselage numbers. I plan to use decal strips for that process!
RAGIII


WOW Rick...can't believe I missed this one.  Stupendous effort and so much work on those markings!  Really looks great.
I think I spend too much time with my scissors...must get out more!

Dan

Thanks for looking and the compliments Dan! Keep right on going with those scissors as I love following your Paper Model Builds!!
RAGIII


So this is where I am today. I will start work on the Vickers tomorrow:
RAGIII



(https://i.postimg.cc/8kbftWwg/103207644-3677035145656864-6534369231469097552-n.jpg)



(https://i.postimg.cc/FsWdQ42P/103065168-3677034645656914-1080285530242717139-n.jpg)



(https://i.postimg.cc/7Z5CHR4q/103063522-3677034845656894-8035075783430786569-n.jpg)



(https://i.postimg.cc/tTNJvQ3N/102941819-3677035085656870-1991847118100015495-n.jpg)


Those with sharp eyes will see a glitch in the checkered stripe on the undersurface of Luke's @21. I ripped the decal and repaired, but at some point it separated and dried without Me noticing. I am thinking of a Fabric replacement over the stripe.... Hey it was flown by Luke and surely took some damage  ::)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 10, 2020, 07:40:02 AM
Didn't notice any flaw in the checkered stripe, all I can see is a trio of absolutely beautiful Spads. You seem to be getting a lot of enjoyment from this project, I'm pretty certain we all are from following it.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on June 10, 2020, 08:23:10 AM
RAGIII,
That's a great contrast between the metal areas painted with Ripolin and the aluminized dope on the fabric areas.
They are looking fantastic.
                                           Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on June 10, 2020, 04:04:30 PM
Very nice!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on June 10, 2020, 09:49:20 PM
All of them are looking great, Rick!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on June 10, 2020, 10:52:14 PM
The trio look great Rick!  Wow, you're completing three models in the time it takes me to complete one! ;D  Nicely done.

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Vickers on June 11, 2020, 02:49:30 AM
Really fun and inspiring to see you beavering away on your SPAD trio, Rick. These are looking super!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on June 11, 2020, 03:19:12 AM
You really are motoring with these Rick. All three are of the very highest standard and look super - I am having problems keeping up with you - totally breathless!!

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 11, 2020, 08:05:58 AM
Thanks to All for the very Nice comments! Today I worked on some Vickers Guns but couldn't resist getting one of the three on it's legs  8) I did sand a bit on the struts to at least round them off a bit.
RAGIII


(https://i.postimg.cc/3JtLwG3C/103565279-3679956025364776-1445824737157234904-n.jpg)



(https://i.postimg.cc/kgDTR54r/103765034-3679955958698116-5349362101617190589-n.jpg)



(https://i.postimg.cc/qvYjsdhN/104182986-3679955882031457-1047774979906739247-n.jpg)



(https://i.postimg.cc/HLy33PXB/104192084-3679955815364797-4593779703977434845-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on June 11, 2020, 04:05:33 PM
Nice!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Borsos on June 12, 2020, 01:02:03 AM
Simply oitstanding Rick! Are these the kit‘s wheels?
Andreas
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Monty on June 12, 2020, 02:18:45 AM
Really nice to watch as they take shape, Rick! You're working some magic here! Regards, Marc.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 12, 2020, 02:25:32 AM
Nice!

Thanks Gaz!!
RAGIII


Simply oitstanding Rick! Are these the kit‘s wheels?
Andreas

Thanks Andreas. Yes the kit wheels straight from the box. I do have a set of wheels for the Luke bird included with the Aviattic Legends set. Rickenbackers will also be from the kit.
RAGIII


Really nice to watch as they take shape, Rick! You're working some magic here! Regards, Marc.

Thanks Marc!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 12, 2020, 02:29:02 AM
Lovely work Rick, that scheme is looking magical. What a great tribute to a wonderful, heroic pilot. You're doing both him and yourself proud!

Hopefully the No1 masks will turn up in the post soon so you can crack on with the mount of the great American adventurer too. :)

Richie
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 12, 2020, 04:42:58 AM
Lovely work Rick, that scheme is looking magical. What a great tribute to a wonderful, heroic pilot. You're doing both him and yourself proud!

Hopefully the No1 masks will turn up in the post soon so you can crack on with the mount of the great American adventurer too. :)

Richie

As always Thanks Richie for the continued encouragement! I just went to the Mail Box and the Stencils are in Hand. They Look Awesome!!! Thank You so Much for the Help!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 12, 2020, 04:49:47 AM
That is good news, I'm so looking forward to seeing them used. To lift the stencil all in one piece I put a piece of masking tape across all the component parts. The lovely thing about the this masking material is that if you buff the edges with a cocktail stick you can clearly see if it has adhered properly. Can't wait to see the results! :)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 12, 2020, 11:21:10 AM
That is good news, I'm so looking forward to seeing them used. To lift the stencil all in one piece I put a piece of masking tape across all the component parts. The lovely thing about the this masking material is that if you buff the edges with a cocktail stick you can clearly see if it has adhered properly. Can't wait to see the results! :)

Here you go Richie: I did adjust the red outline a bit with tape. Worked like a charm!

RAGIII


(https://i.postimg.cc/FKwpzk11/104118457-3682860248407687-3329373555734735249-n.jpg)

Thank You for your Assistance!


I also got the gear and wheels on the Luke Machine!


(https://i.postimg.cc/2yDxFpQD/104182262-3682860448407667-591065663096220192-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 12, 2020, 04:46:30 PM
Oh yes!!! So pleased to see that they worked out the right size. Very happy to be able to help with this great project. It really is progressing beautifully!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on June 12, 2020, 10:25:33 PM
RAGIII,
The weekend is upon us and I'm sure you'll entertain the masses with the next stage of this build.

                                                                         They're looking great,
                                                                                                        Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: gbrivio on June 12, 2020, 10:54:34 PM
Great paintwork on the third SPAD.
Ciao
Giuseppe
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 12, 2020, 11:31:32 PM
Oh yes!!! So pleased to see that they worked out the right size. Very happy to be able to help with this great project. It really is progressing beautifully!

Thanks Richie. Your help with the masks was invaluable!
RAGIII

RAGIII,
The weekend is upon us and I'm sure you'll entertain the masses with the next stage of this build.

                                                                         They're looking great,
                                                                                                        Kevin


Thanks Kevin. Todays tasks are getting Rickenbackers SPAD on its legs and finishing the Vickers.
RAGIII


Great paintwork on the third SPAD.
Ciao
Giuseppe

Thanks Giuseppe!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on June 13, 2020, 09:23:07 AM
AWesome work, Rick!  The Spad must have the most robust looking of all WWI landing gear.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 13, 2020, 09:20:38 PM
AWesome work, Rick!  The Spad must have the most robust looking of all WWI landing gear.

Thanks Gaz. Yes, the SPAD gear is indeed robust. Very sturdy on the kit also!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on June 13, 2020, 10:31:17 PM
Top notch work Rick , man are they taking shape awesomely  :)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 14, 2020, 12:05:58 AM
Thanks Terri! Yesterday I was working on the star on Rickenbackers wheels. I found a small issue after painting the blue and applying a white star. More when I have photos.
RAGIII

Here is a Teaser pulled from Google images. Look closely at the wheels. I will explain when I finish working on the kit wheels  ::)


(https://i.postimg.cc/9QRyqSRr/101431341-1217723358566626-5357757370007027712-o.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on June 15, 2020, 05:23:52 AM
Rick, I was some days offline, but in meantime you have done a great show here! The SPADs will be a great addition to your collection.

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on June 15, 2020, 05:43:56 AM
How remiss of me, I have forgotten to say how well you are doing for ages!

Excellent work, Rick

I'm flat out on a heretical group build elsewhere at the moment. I'm popping in every day and planning to finish my WWI builds when I have that done

Keep at it

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 15, 2020, 05:48:13 AM
Rick, I was some days offline, but in meantime you have done a great show here! The SPADs will be a great addition to your collection.

Cheers,
Frank

Thanks Frank, Greatly Appreciated!
RAGIII


So going on with the wheels. After painting the wheel portion blue I applied a white star decal. It was then that I Noticed the wheels on Rickenbacker's SPAD were reversed. I had to drill the opening for the axle all the way trough and of course paint the blue and add the star marking. I replaced the locking mechanism and did some weathering on the tires and wheels. I was lucky that I had a spare set of wheels  ;D
RAGIII

PS: Just for the record, Hobby Craft failed to supply the wheel Markings on their decal sheet  :(


(https://i.postimg.cc/ncnn51Bk/104216866-3691012210925824-5641302833086470958-n.jpg)



(https://i.postimg.cc/dtnJKT9K/104317125-3691012087592503-6969190186170111672-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 15, 2020, 05:51:08 AM
How remiss of me, I have forgotten to say how well you are doing for ages!

Excellent work, Rick

I'm flat out on a heretical group build elsewhere at the moment. I'm popping in every day and planning to finish my WWI builds when I have that done

Keep at it

Richard

Thanks Richard! I have missed your SPAD builds! I was hoping your build of the Hobby Craft XIII would pave the way for the struts  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on June 15, 2020, 06:03:44 AM

Thanks Richard! I have missed your SPAD builds! I was hoping your build of the Hobby Craft XIII would pave the way for the struts  8)
RAGIII

I have some brass strip in stock for that very job, once this Bf 109 is done

I'm quite enjoying the anticipation

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 15, 2020, 07:00:05 AM

Thanks Richard! I have missed your SPAD builds! I was hoping your build of the Hobby Craft XIII would pave the way for the struts  8)
RAGIII

I have some brass strip in stock for that very job, once this Bf 109 is done

I'm quite enjoying the anticipation

Richard

Damn, I was afraid brass would be the solution. The North Carolina SPAD factory doesn't have the Machinery for brass. If I end up replacing the struts they will be hewn from Bamboo  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RLWP on June 15, 2020, 07:11:33 AM
Bamboo is good, I'm a better metalworker than a woodworker

Of course, bamboo is a grass

Richard
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 15, 2020, 07:58:19 AM
Where all three are today:
RAGIII


(https://i.postimg.cc/F1tk5C5G/104337539-3691335567560155-9204876675021920648-o.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on June 15, 2020, 08:31:35 AM
Real fine work Rick. Amazing self discipline to keep all three together. So looking forward to the same photo with all 3 finished.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 15, 2020, 09:49:01 AM
Real fine work Rick. Amazing self discipline to keep all three together. So looking forward to the same photo with all 3 finished.
sp

Thanks Stephen. One more clear coat to seal the painted numbers, then weathering.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: dr 1 ace on June 15, 2020, 10:52:26 AM
Lovely Trio and almost done !  Nice "catch" on the wheels of ER's a/c.

Ed
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 15, 2020, 08:35:12 PM
Lovely Trio and almost done !  Nice "catch" on the wheels of ER's a/c.

Ed

Thanks Amigo!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 15, 2020, 09:13:54 PM
So nearly there already! What's up to bat next? :)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on June 15, 2020, 09:16:49 PM
All three are looking awesome Rick ! Excellent job on the decals and your catch with the wheels


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 15, 2020, 10:00:13 PM
So nearly there already! What's up to bat next? :)

Thanks Richie. There is still a lot to do before they are done  :o The next one will almost certainly be the CSM Nieuport 23.
RAGIII


All three are looking awesome Rick ! Excellent job on the decals and your catch with the wheels


Terri

Thanks Terri!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on June 15, 2020, 11:08:31 PM
They are looking wonderful Rick!  I can picture the finished models now.  Beautiful and dramatic! 

I must ask (although you probably answered pages ago) what you use for your gloss coat and how you apply it?  It really looks good.  Thanks.

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 16, 2020, 03:42:47 AM
They are looking wonderful Rick!  I can picture the finished models now.  Beautiful and dramatic! 

I must ask (although you probably answered pages ago) what you use for your gloss coat and how you apply it?  It really looks good.  Thanks.

Best,

Bob

Thanks Bob. I appreciate your vision  ::) I only hope I can Meet the expectations  8)
RAGIII

PS: I tend to go between two gloss coats. My Old Standby of Future/ Kleer and Valejo Gloss coat. I think I used Future this time  ::)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 17, 2020, 02:22:42 AM
So this will be the last update for at least a week as I am Leaving tomorrow for California. My Son is getting Married and Love waits for No Pandemic  8)
I have added the Vickers to all three SPADS. I used what I had so all are slightly different. Luke has Gaspatch Barrels from the Aviattic set and Stephen( Lone Modeler). Rickenbacker has Part PE barrels added to the kit butts, and Guynemer has Modified Roden Nieuport 27 Vickers.
RAGIII



(https://i.postimg.cc/TP9Z2t22/104309293-3695878627105849-583304339475823351-n.jpg)


(https://i.postimg.cc/NMjZKRL6/104428142-3695878720439173-6501015647499455487-n.jpg)


(https://i.postimg.cc/50KTLjFZ/104315913-3695878963772482-1656557109836305492-n.jpg)


(https://i.postimg.cc/dQXg0kFC/104187351-3695879037105808-9059740180248206935-n.jpg)


(https://i.postimg.cc/W1myS5km/104236858-3695879180439127-8122975694874463242-n.jpg)


(https://i.postimg.cc/k4HYDZ0C/104252308-3695879400439105-1033030139194266040-n.jpg)


Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on June 17, 2020, 03:01:29 AM
RAG III,
The trio are looking great! Have a safe and uneventful trip (except the wedding, of course) and I'll be standing
by for the next update.

                                           Kevin                                           
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on June 17, 2020, 03:28:28 AM
My they look very good Rick. I too am away now for a few days so I will be able to keep up with you when we return!

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 17, 2020, 04:23:40 AM
All looking great and ready for finishing when you get back. Have a good week in California, hope the wedding is great occasion.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on June 17, 2020, 05:56:06 AM
Safe journey to a happy occasion.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 17, 2020, 06:31:36 AM
RAG III,
The trio are looking great! Have a safe and uneventful trip (except the wedding, of course) and I'll be standing
by for the next update.

                                           Kevin                                           

Thanks Kevin!
RAGIII


All looking great and ready for finishing when you get back. Have a good week in California, hope the wedding is great occasion.


Thanks. I am looking forward to Meeting My New Daughter and Granddaughter!
RAGIII

Safe journey to a happy occasion.
sp

Thanks Steven!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on June 17, 2020, 06:46:51 AM
That are really three beauties, I don't know which one I like most.
You made a perfect job so far, I can't see a fault.

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on June 17, 2020, 06:54:07 AM
Three beauties in the making!  I love that they all look so different!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 17, 2020, 07:31:39 AM
That are really three beauties, I don't know which one I like most.
You made a perfect job so far, I can't see a fault.

Cheers,
Frank

Thanks Frank! Very Generous!
RAGIII

Three beauties in the making!  I love that they all look so different!

Thanks Gaz, Greatly appreciated!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on June 17, 2020, 10:31:56 AM
Oooooo , keeping us in spence are you  ;) Congrats on your son getting married , enjoy and look forward to your continuation  :)



Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: pepperman42 on June 19, 2020, 09:52:13 PM
Enjoy the wedding and being a new father in law. Very sharp Spads!!!

Steve
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 23, 2020, 12:32:24 AM
Oooooo , keeping us in spence are you  ;) Congrats on your son getting married , enjoy and look forward to your continuation  :)



Terri

Thanks Terri! The Wedding was Beautiful! Hopefully back on the SPADs today  8)
RAGIII


Enjoy the wedding and being a new father in law. Very sharp Spads!!!

Steve

Thanks Steve. Greatly appreciated on Both counts!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 23, 2020, 03:11:33 PM
So not a lot done on My first day back but some progress was made. I added the black shadowing to the numbers on the fuselage of the Guynemer SPAD  using decal strips.  I also applied the black X on the upper wing. Not really noticeable but I also glued the Vickers in place....on all three. And just for fun: The Aviattic Luke figure:
RAGIII







(https://i.postimg.cc/7PmmCQJj/105957311-3714371708589874-7684984523110056140-n.jpg)



(https://i.postimg.cc/k53cr0LR/106187920-3714372361923142-6213600391008124144-n.jpg)



(https://i.postimg.cc/SK6GmZpT/104954305-3714426495251062-4727285503147870078-o.jpg)



Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 23, 2020, 09:11:45 PM
Good to get a Rick update, the decal strips seem like a very good way to add that the shadow round the numbers. Luke looks very dapper too!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on June 23, 2020, 11:11:47 PM
RAGIII,
Welcome back to the work bench. Start the week small and I'm sure it will lead to some great progress
on the three builds.
                             Enjoy the day,
                                         Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 24, 2020, 08:18:52 AM
Good to get a Rick update, the decal strips seem like a very good way to add that the shadow round the numbers. Luke looks very dapper too!

As always Richie, thanks for the comments!
RAGIII



Welcome back to the work bench. Start the week small and I'm sure it will lead to some great progress
on the three builds.
                             Enjoy the day,
                                         Kevin

Thanks Kevin!
RAGIII


I am posting this photo again. Does anyone know why the center of the lower fuselage is so Much Darker than the rest of the "Ecru" painted area?  Is it painted a dark color, Metal? etc.
RAGIII


(https://i.postimg.cc/9QRyqSRr/101431341-1217723358566626-5357757370007027712-o.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on June 24, 2020, 08:26:30 AM
Decals strips is a great idea!  Thanks for sharing!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 24, 2020, 08:56:24 AM
Decals strips is a great idea!  Thanks for sharing!

Thanks Gaz. The strips are great for a situation like this where the numbers were hard edged and straight! Had I needed to shade the rounded upper wing #2 I would have been in trouble  ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on June 24, 2020, 10:28:12 AM
I would say , same as the cowl colour ? If it was metal it would be more of a gary shade . I feel it is too dark to be metal , but I could be very well be wrong . Nice job by they way  ;)



Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 25, 2020, 01:34:12 AM
I would say , same as the cowl colour ? If it was metal it would be more of a gary shade . I feel it is too dark to be metal , but I could be very well be wrong . Nice job by they way  ;)



Terri

Thanks Terri! I posted the question in Aircraft Information and Questions. If No One has a better thought I plan to paint it red.
RAGIII

PS: Someone elsewhere suggested an "Opening". Could it be that I missed the obvious and the panel is removed?
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on June 25, 2020, 04:30:52 AM
After looking at a picture of a SPAD at the NASM web site, it looks like an oil cooler, painted black.  It has ribs or tubes on the bottom surface.  Not all SPADs had this.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 25, 2020, 05:01:00 AM
After looking at a picture of a SPAD at the NASM web site, it looks like an oil cooler, painted black.  It has ribs or tubes on the bottom surface.  Not all SPADs had this.

That is certainly One of the Possibilities Ken! See this thread for More ideas  :o

https://forum.ww1aircraftmodels.com/index.php?topic=11257.0

RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 25, 2020, 05:24:48 AM
Hi Rick, I downloaded the Smithsonian institute picture and increased the exposure considerably. Unfortunately Flickr isn't playing at the moment but there is definitely a grille there. The black and white war time photo has the vague suggestion of it too. When Flickr decides to play nicely again I will post it so you can see. The grille slates run lengthways.

Here you are Rick

(https://live.staticflickr.com/65535/50040992898_fabed20a1d_z.jpg) (https://flic.kr/p/2jeXaMC)2020-06-24_08-53-38 (https://flic.kr/p/2jeXaMC) by Richard Williams (https://www.flickr.com/photos/187004837@N07/), on Flickr

Hope this helps resolve it.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on June 25, 2020, 05:54:28 AM
Rick, I don't know about that panel issue, but I just have to say that your colors, markings and finish on these SPADs are just superb.  What do you use for your clear finish over the decals, and how do you apply it?  Thanks.

Best,

Bob 
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 25, 2020, 06:20:22 AM
Hi Rick, I downloaded the Smithsonian institute picture and increased the exposure considerably. Unfortunately Flickr isn't playing at the moment but there is definitely a grille there. The black and white war time photo has the vague suggestion of it too. When Flickr decides to play nicely again I will post it so you can see. The grille slates run lengthways.



Hope this helps resolve it.

Thanks Richie. Yes, the kit has the grille. The Smithsonian photo seems plausible as an option although the other Rickenbacker photo I posted seems to Not Be black. Taken at a different time so it is possible that it was changed out or painted later. At least I have photo evidence for different options  8)



(https://i.postimg.cc/zvGh7sqH/105486964-146427027104962-8586192032294499453-o.jpg)


RAGIII



Rick, I don't know about that panel issue, but I just have to say that your colors, markings and finish on these SPADs are just superb.  What do you use for your clear finish over the decals, and how do you apply it?  Thanks.

Best,

Bob 

Thanks Bob. I either used Future / Klear or Valejo gloss. I honestly don't remember. I know I used the Valejo to seal the painted numbers and decals on the Guynemer SPAD>  ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on June 25, 2020, 09:24:48 AM
Even enlarging the photo I had a very hard time seeing the grill  ::)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 25, 2020, 10:46:12 PM
Even enlarging the photo I had a very hard time seeing the grill  ::)


Terri

I am convinced now that it is there and painted black in one photo and left in it's natural state in the other. JMHO.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 26, 2020, 08:11:54 AM
So I have reached the weathering point on all three SPADs. I looked at lots of photos and then started on the Rickenbacker SPAD. I used an Oil wash and Tamiya pastels. Still a bit to do. The undersides are almost finished but still need to do the uppers on the wings.
RAGIII



(https://i.postimg.cc/VkTBwfmm/105927556-3722364307790614-7961106704424388152-n.jpg)



(https://i.postimg.cc/jdM4861W/106012065-3722364164457295-848731719888058454-n.jpg)



(https://i.postimg.cc/fWjKdQjf/106021655-3722363994457312-5395484236310490959-n.jpg)



(https://i.postimg.cc/02kCdXVR/106529212-3722364094457302-2388957234886744622-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on June 26, 2020, 09:23:54 AM
You know Rick , your weathering has really improved over the years and I must say that is looking very sweet indeed !  :)
The underside is most impressive , just love how the fabric turned out . Have you tried using the Tamiya pastels as a wash before ? Works very well but not on a dull surface they don't . Yields interesting results though . Looking forward to the others  :)



Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on June 26, 2020, 09:58:27 AM
The underside looks great!  Believable.  My eyes can't detect much up top....  TBH, with a fully enclosed cowl, I wouldn't expect to see much.  To repeat a phrase I think I've read about 100 times:  "With aircraft weathering, less is more"

Quick question for you regarding glue points for struts and rigging:  Do you use anything to keep paint from getting into them?  And which glue do you use for your struts?

Gaz
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 26, 2020, 04:25:40 PM
Great job on the weathering Rick. I think I need to order some of those Tamiya pastels. The oil stained lower surfaces are looking incredibly real.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on June 26, 2020, 10:00:50 PM
Yes, great job on the weathering.  Just the right amount of tonal variation - not overdone.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 27, 2020, 12:22:23 AM
You know Rick , your weathering has really improved over the years and I must say that is looking very sweet indeed !  :)
The underside is most impressive , just love how the fabric turned out . Have you tried using the Tamiya pastels as a wash before ? Works very well but not on a dull surface they don't . Yields interesting results though . Looking forward to the others  :)



Terri

Thanks Terri. I haven't  tried using the Tamiya Pastels directly as a wash but I have achieved interesting results trying to remove them with a damp brush  ;D
RAGIII


The underside looks great!  Believable.  My eyes can't detect much up top....  TBH, with a fully enclosed cowl, I wouldn't expect to see much.  To repeat a phrase I think I've read about 100 times:  "With aircraft weathering, less is more"

Quick question for you regarding glue points for struts and rigging:  Do you use anything to keep paint from getting into them?  And which glue do you use for your struts?

Gaz


Thanks Gaz. The upper wings haven't been done yet but will be a Bit cleaner than the undersides. The fuselage has some exhaust staining and oils around the panels.

As for the glue points and struts it really depends. With WNW I usualy try to keep the openings as clean as possible or go back with a tooth pick and clean them out. I then just place the struts in position and hit them with Tamiya Xtra Thin when all is lined up.

With this kit I will use Testors, Not the tube or liquid, the one that is in between in the black plastic container  ::) At least that is the plan.

Rigging is just thin super glue.
RAGIII


Great job on the weathering Rick. I think I need to order some of those Tamiya pastels. The oil stained lower surfaces are looking incredibly real.

Thanks Richie. I like the Tamiya stuff although I still use more Oils than pastels.
RAGIII


Yes, great job on the weathering.  Just the right amount of tonal variation - not overdone.

Thanks Ken, greatly appreciated.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on June 27, 2020, 05:33:29 AM
RAGIII,
With the weathering the "Ecru" underside looks just right. In the past I'm sure you're failure with the debates as what the colour really was.
Some said it had a slight gray-blue tinge to it on aircraft built by some manufactures. Anyway, you've got it right to my eyes. Looking great!                 

                                                                                                                                                                                  Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on June 27, 2020, 05:50:10 AM
I do like that weathering Rick: just enough contrast to be convincing. I just wish I had the courage to try a bit more on my models, but I am afraid of overdoing it.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 27, 2020, 07:48:24 AM
Kevin and Stephen,
Thank You for your continued support!
RAGIII

I have worked on getting the other two to the same point in weathering:



(https://i.postimg.cc/vBf7whFG/106292347-3725173477509697-2093425267374660143-n.jpg)



(https://i.postimg.cc/MHw76BqV/106541092-3725173350843043-4383472356892001364-n.jpg)



(https://i.postimg.cc/MHYyvGp4/106464119-3725164290843949-3383650782506894803-n.jpg)



(https://i.postimg.cc/KYd7WVW9/106416110-3725164530843925-4215889761522372165-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on June 27, 2020, 08:40:22 AM
Very deft hand with the weathering Rick. So easy to go 1:1 weathering on a 1:32 model and you danced right around that pitfall with style.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on June 27, 2020, 10:25:12 AM
Thumbs up Rick !


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on June 27, 2020, 05:11:39 PM

You're rocking it, Rick!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on June 27, 2020, 06:32:32 PM
Good job Rick, just enough and nicely done too.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 27, 2020, 10:12:50 PM
Very deft hand with the weathering Rick. So easy to go 1:1 weathering on a 1:32 model and you danced right around that pitfall with style.
sp

Thanks SP! I appreciate your comments.
RAGIII


Thumbs up Rick !


Terri

Thanks Terri!
RAGIII


You're rocking it, Rick!

Thanks Gaz!
RAGIII


Good job Rick, just enough and nicely done too.

Thanks Richie. Today I plan to add the earth tones and do the wing upper surfaces . I will then be at a place where I Have to work on the struts  ::)
RAGIII

Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on June 28, 2020, 01:05:18 AM
RAGIII,
The strut conundrum will be interesting to watch and a learning experience for all.

                                                                        Standing by for the next lesson,
                                                                                                             Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on June 29, 2020, 04:05:57 AM
RAGIII,
The strut conundrum will be interesting to watch and a learning experience for all.

                                                                        Standing by for the next lesson,
                                                                                                             Kevin

Hopefully it won't be a lesson in What Not To DO  :o I have finished the weathering and sprayed all of the fabric areas with a satin coat. A few small details to add then the strut experience begins  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on June 29, 2020, 06:04:36 AM
Very colorful and weathered birds. I really like the whole trio.
No, I'm not starting my SPAD now - I have enough running projects! ::)

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: dr 1 ace on June 30, 2020, 09:13:30 AM
All three looking good !!

By regular e-mail would you send me the paints you used.

Thanks ,

Ed
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Kreston on June 30, 2020, 09:47:46 PM
I've really enjoyed watching you build and paint/weather these three...looking forward to seeing the finishing steps.  Thanks for taking the time to do this.

Kreston
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 02, 2020, 08:41:20 AM
Very colorful and weathered birds. I really like the whole trio.
No, I'm not starting my SPAD now - I have enough running projects! ::)

Cheers,
Frank

Thanks Frank! You know you really want to Jump on that SPAD  8)
RAGIII


All three looking good !!

By regular e-mail would you send me the paints you used.

Thanks ,

Ed

Thanks Amigo. I will get the mixes to you via E MAil soon.
RAGIII


I've really enjoyed watching you build and paint/weather these three...looking forward to seeing the finishing steps.  Thanks for taking the time to do this.

Kreston


Thanks K! I appreciate your comments!
RAGIII


So here is the latest. Weathering is pretty much finished. I have added the cabanes on all three and those pesky H struts on the Guynemer SPAD.
RAGIII


(https://i.postimg.cc/9FzzStvK/106312028-3734003156626729-2256492588270464879-n.jpg)



(https://i.postimg.cc/MTKzBzwN/84176818-3734003023293409-5336603283229874598-n.jpg)



(https://i.postimg.cc/FKG4NwSZ/106210019-3734003089960069-5877067782496583287-n.jpg)



(https://i.postimg.cc/KjpjjRg0/106255571-3734003583293353-1584017533645655960-n.jpg)



(https://i.postimg.cc/W4VN2MH2/83440778-3734003536626691-8786836716019486901-n-1.jpg)



(https://i.postimg.cc/HL0L5Syc/106528739-3734003256626719-3664483393359144767-n.jpg)



(https://i.postimg.cc/jd9CrnT5/106492948-3734003449960033-968961736010398671-n.jpg)



(https://i.postimg.cc/6qq6kt1n/106669645-3734003333293378-9016422372342881333-n.jpg)


PS: After looking at photos and restorations like the Memorial Flight I decided the Cabanes were "Most Likely" not a wood finish but rather painted to match the camo. If anyone has definitive proof otherwise let Me know now  ::)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on July 02, 2020, 09:19:02 AM
RAGIII,
You continue to impress with these Spads.

                                             Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: gbrivio on July 02, 2020, 02:37:55 PM
Very nice and convincing weathering, I like subtlety you put on these: used but not dirty, living flying machines.
Ciao
Giuseppe
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on July 02, 2020, 06:54:33 PM
Rick,
    Three sweet looking birds. 
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on July 02, 2020, 08:35:44 PM
Love the weathering Rick, very convincingly done. These 3 are going to look awesome on display together.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on July 02, 2020, 09:20:32 PM
Excellent weathering on the trio Rick  :)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on July 02, 2020, 10:10:12 PM
All three are just awesome looking, Rick.  Seeing them all finished together will be something!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 03, 2020, 05:32:14 AM
RAGIII,
You continue to impress with these Spads.

                                             Kevin

Thanks Kevin!
RAGIII


Very nice and convincing weathering, I like subtlety you put on these: used but not dirty, living flying machines.
Ciao
Giuseppe

Thanks Giuseppe! I May have gone a little further on the undersides than I intended but I am Happy with the overall results!
RAGIII


Love the weathering Rick, very convincingly done. These 3 are going to look awesome on display together.

Thanks Richie. Lets Hope they ALL make it to the finish line  ::)
RAGIII


Excellent weathering on the trio Rick  :)


Terri

Thanks Terri, greatly appreciated.
RAGIII


All three are just awesome looking, Rick.  Seeing them all finished together will be something!


Thanks Ken. Like I said to Richie, lets hope they all make it  ;D
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: bobs_buckles on July 03, 2020, 06:19:11 AM
(https://untappd.akamaized.net/site/beer_logos_hd/beer-2929288_3ca3c_hd.jpeg)

vB  ;)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 03, 2020, 07:10:13 AM
(https://untappd.akamaized.net/site/beer_logos_hd/beer-2929288_3ca3c_hd.jpeg)

vB  ;)

Thanks von B!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 04, 2020, 07:24:42 AM
Where I was yesterday on all three. Wings just sitting in position for the photos.
RAGIII



(https://i.postimg.cc/3NmFpBNW/106539923-3742974195729625-2746179101103608081-n.jpg)



(https://i.postimg.cc/nrbvHD2x/106909660-3742973729063005-8217984099306893089-n.jpg)



(https://i.postimg.cc/26BQRw4T/106738600-3742973979062980-6911987403689244395-n.jpg)



(https://i.postimg.cc/HxftVKpf/106567191-3742974599062918-5343850896550410443-n.jpg)



(https://i.postimg.cc/bv5xBM2s/106702528-3742974279062950-1688235439597442663-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on July 04, 2020, 08:03:43 AM
Can't decide, which one I like most ::) All 3 looks great!

Good luck with struts and rigging!

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: NinetythirdLiberator on July 04, 2020, 03:49:34 PM
Wow x 3, ;D
Superb job Rick. I hope mine turns out half as nice as just one of yours!!!
Dan
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 05, 2020, 04:35:57 AM
Can't decide, which one I like most ::) All 3 looks great!

Good luck with struts and rigging!

Cheers,
Frank

Thanks Frank! My Favorite changes from Day to Day  ;D
RAGIII

Wow x 3, ;D
Superb job Rick. I hope mine turns out half as nice as just one of yours!!!
Dan

Thanks Dan. Your SPAD will be Gorgeous, which reminds Me I need to check in on your build!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on July 05, 2020, 07:58:11 AM
They look good with the wings on, Rick!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on July 05, 2020, 08:11:30 AM
Same as others have said, they're all so eye catching. 3 way tie for first place!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 05, 2020, 08:29:06 AM
They look good with the wings on, Rick!

Thanks Gaz. I forgot to mention that I added the little drain under the cowlings on all three. Yesterday I painted the cockpit padding. Tomorrow I need to add the piping on the underside of the upper wing then it will finally be time to attempt to permanently mount the wings in place.
RAGIII

Same as others have said, they're all so eye catching. 3 way tie for first place!

Thanks Richie. I appreciate your encouragement!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Early Bird Fan on July 06, 2020, 04:18:54 PM
all 3 look great, really can't decide which one i prefer
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 07, 2020, 12:27:45 AM
all 3 look great, really can't decide which one i prefer

Thanks for the Comments. They are appreciated!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: FAf on July 07, 2020, 04:08:00 AM
Still more great work being done here. I've been busy with other stuff but started a SPAD of my own a couple of days ago - all your fault of course 😉 - and I needed some more info on how to paint the fuselage insides. A quick look at your thread here and I could move on. Thanks!

/Fredrik
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on July 07, 2020, 04:29:36 AM
The trio looks better with every update Rick!  I am very impressed with the finish and your colors.  Do you apply your clear coats with brush or airbrush?  Thanks!

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 07, 2020, 12:15:37 PM
Still more great work being done here. I've been busy with other stuff but started a SPAD of my own a couple of days ago - all your fault of course 😉 - and I needed some more info on how to paint the fuselage insides. A quick look at your thread here and I could move on. Thanks!

/Fredrik

Thanks Fredrik. I am looking forward to seeing your SPAD build!
RAGIII


The trio looks better with every update Rick!  I am very impressed with the finish and your colors.  Do you apply your clear coats with brush or airbrush?  Thanks!

Best,

Bob

Thanks for the comments Bob! Greatly appreciated.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 09, 2020, 12:36:04 AM
I managed to get two out of the three upper wings mounted using My Modified kit struts although not without some issues. ( Touch Up Required) The Rickenbacker SPAD was another story. I was trying to make adjustments to the alignment and slipped causing both H struts to irreparably shatter! I am now carving replacements from Bamboo as I should have on all three!
RAGIII


(https://i.postimg.cc/2yL8wwgN/107376366-3757635727596805-7769576485269830882-n.jpg)



(https://i.postimg.cc/vmXBHD5k/107427261-3757636074263437-3218760608908818603-n.jpg)



(https://i.postimg.cc/cHbLwj9c/107449781-3757635650930146-6531491022671533436-n.jpg)



(https://i.postimg.cc/K4XcsTyk/107372954-3757635044263540-7896317170286884877-n.jpg)



(https://i.postimg.cc/prj5TRWj/107689077-3757634877596890-4738637393190190518-n.jpg)



(https://i.postimg.cc/G2VsdHCr/107601065-3757635294263515-494553021307625580-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on July 09, 2020, 12:58:11 AM
RAGIII,
Sorry to hear about the shattered struts. The two successes look great.
I'm looking forward to the rigging operation still on the horizon.

                                                                                         Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on July 09, 2020, 01:51:02 AM
Thats awful Rick, however the new struts will be even better yet. Model on.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on July 09, 2020, 02:07:45 AM
They really do look beautiful Rick, you will have Eddie's bird sorted in no time too with the bonus that you get to do a bit of wood carving which is always fun.


Richie
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on July 09, 2020, 04:29:11 AM
Those SPADs look fantastic Rick!  Very inspiring. ;D  Still amazing to me that you can do three at once. :o

Best regards,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on July 09, 2020, 08:27:57 AM
Sorry for your shattered struts!  I really need to learn to do some in bamboo.  Birds look great, tho!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on July 09, 2020, 08:55:01 AM
I see you have been busy in front of the bench Rick , these are turning out to be your best yet and I still can't wait for the rigging ! Keep up the excellent work  :)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 09, 2020, 10:38:35 AM
RAGIII,
Sorry to hear about the shattered struts. The two successes look great.
I'm looking forward to the rigging operation still on the horizon.

                                                                                         Kevin

Thanks Kevin. The rigging will start once I carve the New struts for the Rickenbacker build and manage the wing assembly  :o I also will touch up some places where the upper wing mounting caused some glue blobs and removed paint  8)
RAGIII


Thats awful Rick, however the new struts will be even better yet. Model on.
sp

I hope the struts come out as well as you think they will  ;D Like I said I should have done this on all three!
RAGIII


Those SPADs look fantastic Rick!  Very inspiring. ;D  Still amazing to me that you can do three at once. :o

Best regards,

Bob

Thanks Bob, I appreciate your comments!
RAGIII


Sorry for your shattered struts!  I really need to learn to do some in bamboo.  Birds look great, tho!

Thanks Gaz!
RAGIII


I see you have been busy in front of the bench Rick , these are turning out to be your best yet and I still can't wait for the rigging ! Keep up the excellent work  :)


Terri

Thanks Terri for the Very Kind comments!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: NinetythirdLiberator on July 09, 2020, 01:01:32 PM
They look GREAT, Rick...really fine work.  Your struts are turning out great.  We'll have to have a SPAD-Off soon!  ;D ;)
Dan
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 10, 2020, 05:46:12 AM
Someone asked if I sprayed the clear coats but a quick look I did not find who asked. So the answer is Yes....All sprayed!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: acewwi on July 10, 2020, 06:12:52 AM
Someone asked if I sprayed the clear coats but a quick look I did not find who asked. So the answer is Yes....All sprayed!
RAGIII
Reply #523
Spyros
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 10, 2020, 06:17:25 AM
Someone asked if I sprayed the clear coats but a quick look I did not find who asked. So the answer is Yes....All sprayed!
RAGIII
Reply #523
Spyros

Thanks  ;D
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on July 10, 2020, 06:59:24 AM
Oh, again a improvement by accident? ::)
Bamboo sound like a good option in some cases. Never used it. What do you use as source, Chopsticks?

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 10, 2020, 07:58:10 AM
Oh, again a improvement by accident? ::)
Bamboo sound like a good option in some cases. Never used it. What do you use as source, Chopsticks?

Cheers,
Frank

Bamboo skewers from the Camping section in Wal Mart  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Dwaynewilly on July 10, 2020, 03:35:05 PM
Outstanding work on all three.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on July 11, 2020, 05:10:49 AM
Rick, since you've established yourself as the consummate crafter of the SPAD, maybe you can add one more to your collection--the all black SPAD of Hans von Hammer's French nemesis, The Hangman:

(https://live.staticflickr.com/65535/50098141261_5408899bce_z.jpg)

From "Enemy Ace: The Slayers and the Slain!" Star-Spangled War Stories, No. 138, May 1, 1968 (DC Comics). 

 ;) ;D

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 11, 2020, 07:06:29 AM
Outstanding work on all three.

Thanks for the Comment Dwayne!
RAGIII

Rick, since you've established yourself as the consummate crafter of the SPAD, maybe you can add one more to your collection--the all black SPAD of Hans von Hammer's French nemesis, The Hangman:


From "Enemy Ace: The Slayers and the Slain!" Star-Spangled War Stories, No. 138, May 1, 1968 (DC Comics). 

 ;) ;D

Best,

Bob

Thanks Bob, but I will pass on this one. No More SPADS when these are done until I get the Nerve up for the 2 SPAD VII's I have to build for My collection  ???
RAGIII

So that being said I have been carving struts from Bamboo. I plan to carve at least 4 more to make sure I have the best for My build!
RAGIII



(https://i.postimg.cc/Qd75mdm9/107928430-3765776810116030-7613950484731944524-n.jpg)



(https://i.postimg.cc/7YfSCVTN/109107163-3765776846782693-8693204573673837281-n.jpg)



(https://i.postimg.cc/W4PZHcY9/109219915-3765776913449353-5265590992027137424-n.jpg)



(https://i.postimg.cc/k4Jb7FmK/108591710-3765777110116000-5981157373490080036-n.jpg)

Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on July 11, 2020, 07:50:53 AM
I think I've finally decided, this one is my favourite! Those carved struts look perfect Rick, the little accident may just prove to be a blessing in disguise. :)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on July 11, 2020, 07:58:09 AM
I agree!  They'll be super strong with those bamboo struts.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 11, 2020, 08:17:29 AM
I think I've finally decided, this one is my favourite! Those carved struts look perfect Rick, the little accident may just prove to be a blessing in disguise. :)


Thanks Richie! I am now "Wishing" I had done this on all three!  Oh well too late now   :(
RAGIII


I agree!  They'll be super strong with those bamboo struts.

Thanks Gaz!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on July 11, 2020, 09:13:33 AM
I've been away for a few days and just catching up now.  The bamboo looks like a fine option for the struts.  Given their shape, would round toothpicks work, as well?

Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 11, 2020, 10:45:34 AM
I've been away for a few days and just catching up now.  The bamboo looks like a fine option for the struts.  Given their shape, would round toothpicks work, as well?

Yes , probably with just a bit of carving The bamboo really carves easily so no regrets!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on July 12, 2020, 10:33:50 AM
You will be a carving master ick , nice progress on the struts !


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 13, 2020, 12:03:18 AM
You will be a carving master ick , nice progress on the struts !


Terri

Thanks Terri! I am enjoying the process so much I am making about 10 extras  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on July 13, 2020, 09:59:39 PM
Looking awesome, Rick!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on July 14, 2020, 02:53:09 AM
The new struts look better than the kit examples Rick. All three of your Spads look first class, but Like Richie I favour the Rickenbacker example the most.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: bobs_buckles on July 14, 2020, 07:47:09 AM
(https://images.uncyclomedia.co/illogicopedia/en/thumb/1/1d/Googly_Marty_Feldman.gif/400px-Googly_Marty_Feldman.gif)

Magic!
vB
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 14, 2020, 08:47:59 AM
The new struts look better than the kit examples Rick. All three of your Spads look first class, but Like Richie I favour the Rickenbacker example the most.

Stephen.

Thanks Stephen! I will reerve My preference for the ones that get finished  ::) That being said I like how the struts are coming along and like I said I sort of wish I had done them all this way  8)
RAGIII


(https://images.uncyclomedia.co/illogicopedia/en/thumb/1/1d/Googly_Marty_Feldman.gif/400px-Googly_Marty_Feldman.gif)

Magic!
vB

I love your comment Von B!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Borsos on July 14, 2020, 08:55:24 AM
I wasn’t here for a while and they are almost done! They all look great, I won’t choose a favorite.
Best regards,
Andreas
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 15, 2020, 07:37:54 AM
I wasn’t here for a while and they are almost done! They all look great, I won’t choose a favorite.
Best regards,
Andreas


Thanks Andreas. Today I started the tedious task of applying the binding decals to the struts. Lots of them to do and it is time consuming  ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on July 15, 2020, 11:39:03 AM
(https://images.uncyclomedia.co/illogicopedia/en/thumb/1/1d/Googly_Marty_Feldman.gif/400px-Googly_Marty_Feldman.gif)

Magic!
vB

Quit sniffing the glue Bob , your eyes are going wonky ! :)



Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 16, 2020, 08:28:18 AM
Carving is done for the H struts and all are now in place. Just need to add the cross bars to form the H. Then lots of Touch up prior to rigging!
RAGIII


(https://i.postimg.cc/05Ypc8yt/109837999-3780995491927495-2773524683548628265-n.jpg)



(https://i.postimg.cc/wMpDgr0c/109514219-3780995968594114-803195615296663896-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on July 16, 2020, 08:52:51 AM
RAGIII,
The closer you come to completing this triple build the more
you make the rest of us want to give the kit a go. Thanks again
for build report.
                             Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on July 16, 2020, 09:32:17 AM
Nice contrast between strut color ans binding color Rick. The struts themselves are nicely sized and not at all over scale. Very nice.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on July 16, 2020, 09:47:10 AM
Those struts are the cats meow Rick , well done indeed . Looking forward on seeing them with their cross bar and the rigging . For the alrons control is this a kit part ? Or do you have to make this as well ?


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on July 16, 2020, 06:04:37 PM
Rocking Struts, Rick!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on July 16, 2020, 09:00:08 PM
Great work on those struts Rick, they are completely awesome!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on July 16, 2020, 11:51:35 PM
Those struts look most excellent Rick!  Can you give us a little guidance as to what kind of bamboo skewers you used, and how you whittled them down to SPAD struts?  If I missed this earlier in this thread, my apologies and you can just re-direct me.  Thanks.

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 17, 2020, 12:21:06 AM
Those struts look most excellent Rick!  Can you give us a little guidance as to what kind of bamboo skewers you used, and how you whittled them down to SPAD struts?  If I missed this earlier in this thread, my apologies and you can just re-direct me.  Thanks.

Best,

Bob

First thanks to all for the positive comments. They are appreciated greatly! I feel I need to mention that Only the inner H struts were carved. The outer struts are from the kit! One thing I was pleased with was how well the stain mixture I used, Cherry and Golden Oak, matched the tan  acrylic base and oils of the plastic struts. The bindings were CDL rib tapes from one of the WNW kits.

Bob,
 I used skewers found in grilling or housewares sections of most grocery and large retail stores. My steps were as follows:
1. Cut a length off slightly longer than the desired strut length.
2. Use a sharp exacto wedged in to split the skewer portion in half( roughly). I was usually able to get two struts from one piece.
3. Turn it over to the round side and again with a sharp exacto blade start carving length wise. It peels off in even layers. I also carved the sides to desired width in the same way.
4. When close to the width desired start the finishing process with a sanding stick on both sides.
5. Round off the edges with the sanding stick.
6. Sand a V shape on each end while getting it to the actual length.
7. Stain and when dry coat with future.

Thanks for the interest! If I had the tools I am convinced that crushed tubing would be better for the rigging process but these will work for My methods  ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on July 17, 2020, 03:04:41 AM
Oh yes, wooden struts are always a lovely addition to our models 8)
Yours are looking great!

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 17, 2020, 04:22:01 AM
Oh yes, wooden struts are always a lovely addition to our models 8)
Yours are looking great!

Cheers,
Frank

Thanks Frank!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kkarlsen on July 17, 2020, 09:18:59 PM
Great idea with the bamboo skewers!

Must try...

Kent
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 17, 2020, 10:09:08 PM
Great idea with the bamboo skewers!

Must try...

Kent

Thanks Ken! I can't take credit for the idea as some of the Old School WW1 Modelers have been using Bamboo for years for thisw purpose  8) On the other hand it is Ny first time doing this and I am pleased with the results!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 18, 2020, 08:29:49 AM
I have progressed to the point of rigging on all three SPADS . Just need to add the binding tapes to the Guynemer and Luke SPAD's. So this will be the last post until the rigging is well underway. I don't want to reveal the surprise too soon  8)
RAGIII



(https://i.postimg.cc/90DdqYPr/112229151-3786870281340016-5838599354278152617-n.jpg)



(https://i.postimg.cc/C1PC1Qq3/111373783-3786870444673333-5600313559479809094-n.jpg)



(https://i.postimg.cc/0jjf0sv5/109596944-3786870694673308-2554838065009628107-n.jpg)



(https://i.postimg.cc/L8LVTDcP/109968667-3786870544673323-8877794739969743616-n.jpg)



(https://i.postimg.cc/tCL5WwMy/109947682-3786871044673273-3259179380345655801-n.jpg)



(https://i.postimg.cc/RFVQvBN1/110312297-3786870778006633-2559874167853505028-n.jpg)



(https://i.postimg.cc/sfHKDvPM/109879658-3786871104673267-6354745759840638553-n.jpg)



Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on July 18, 2020, 08:32:42 AM
Looking splendid Rick!  That's a very colotful trio of SPADs.  I'm loving this! ;D

Best,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 18, 2020, 09:59:06 AM
Looking splendid Rick!  That's a very colotful trio of SPADs.  I'm loving this! ;D

Best,

Bob


Thanks Bob 😀
RAGIII
ps: Terri, I just remembered you asked about the aileron control rod. It is included in the kit 😁
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on July 18, 2020, 03:24:19 PM
Fantastic, Rick!  Bet you're glad to be looking at rigging!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 18, 2020, 10:34:52 PM
Fantastic, Rick!  Bet you're glad to be looking at rigging!

Thanks Gaz. I am close to running out of things to put off the rigging job  ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on July 18, 2020, 11:23:58 PM
I am close to running out of things to put off the rigging job  ::)
May be not enough raw material? I mean 3 SPADs needs a lot of ropes, sleeves, turnbuckles?, drill bits, ....

If you really want, you will find something. ;D

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on July 19, 2020, 01:21:44 AM
Beautiful work Rick, they're all looking superb.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: NinetythirdLiberator on July 19, 2020, 02:14:17 AM
Those look just beautiful, Rick!  Can't wait to see them all rigged.  As I just finished quick-rigging (cheating) on my SPAD, I know how much fun you will be having X3!!!!  :P ::)

Dan
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 19, 2020, 03:29:41 AM
I am close to running out of things to put off the rigging job  ::)
May be not enough raw material? I mean 3 SPADs needs a lot of ropes, sleeves, turnbuckles?, drill bits, ....

If you really want, you will find something. ;D

Cheers,
Frank

Runny thing Frank, I thought of two things this Morning  ;D
RAGIII


Beautiful work Rick, they're all looking superb.

Thanks Richie! Greatly appreciated.
RAGIII


Those look just beautiful, Rick!  Can't wait to see them all rigged.  As I just finished quick-rigging (cheating) on my SPAD, I know how much fun you will be having X3!!!!  :P ::)

Dan

Thanks Dan. Like I said I hope at least one of mine looks as Great as yours when finished!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: bobs_buckles on July 19, 2020, 03:43:31 AM
A triptych of warriors.

Beautifully worked, Rick!

vB
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 19, 2020, 11:57:37 PM
A triptych of warriors.

Beautifully worked, Rick!

vB

Thanks Bob!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 26, 2020, 07:29:22 AM
As usual I found another reason to post an update  ;D I have added the aileron control rods to all three SPADS but I also came up with an idea for the Luke SPAD. I had a Pegaso Luke Figure and a Copper State French Pilot checking his revolver. Knowing that Luke liked to visit the "Storks" I decided to do a little combination of the figures on a base for Lukes bird. A friendly shooting competition!
RAGIII


(https://i.postimg.cc/MZN9LwQh/116112006-3810797895613921-7085336343018272246-n.jpg)



(https://i.postimg.cc/15Fvhd04/116129012-3810798058947238-2460526716016225153-n.jpg)



(https://i.postimg.cc/x1ygqb42/116290080-3810797828947261-3265578839659707702-n.jpg)


PS: Now I really am almost out of ideas to put off rigging  8)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on July 26, 2020, 07:37:20 AM
What a great idea! That sets your Luke Spad in a class by itself.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: bobs_buckles on July 26, 2020, 07:54:37 AM
Brilliant use of the figures, Rick.
It really does bring life to the scene.

Well done!

vB  ;)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: dr 1 ace on July 26, 2020, 07:58:30 AM
Nice idea  for both figures !

Ed
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on July 26, 2020, 08:23:11 AM
Now that looks totally awesome ! Excellent idea  :)



Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 26, 2020, 08:42:19 AM
What a great idea! That sets your Luke Spad in a class by itself.
sp

Thanks SP! I had originally intended to use the Aviattic Luke figure along with some Aviattic mechanics. After consideration I thought that it was too Much like Mike Norris's Luke build. The idea for using the combination of the Pegaso Luke which was intended to represent the Mythical "Last Stand" in a different way just kind of flowed into My warped Mind  8)
RAGIII


Brilliant use of the figures, Rick.
It really does bring life to the scene.

Well done!

vB  ;)

THanks Bob, I greatly appreciate the comment!
RAGIII


Nice idea  for both figures !

Ed

Thanks Amigo! Greatly appreciated!
RAGIII


Now that looks totally awesome ! Excellent idea  :)



Terri

Thanks Terri! Sometimes an Idea Just Happens  ::)
RAGIII

PS: I think I Might order and add one of the CSM French Mechanics!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on July 26, 2020, 05:59:36 PM
Great idea for the display Rick, they will really set it apart. It's time to bite the bullet and do the rigging though! ;)

Richie
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 26, 2020, 11:51:55 PM
Great idea for the display Rick, they will really set it apart. It's time to bite the bullet and do the rigging though! ;)

Richie

Thanks Richie. If things go as planned I will start rigging today  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on July 27, 2020, 05:26:28 AM
Catching up (again....story of my life....). That is a really original idea to put the two figures next to the Luke aircraft Rick. The model looks excellent already - it can only get better when it is rigged.

The thought of rigging three aircraft at the same time gives me the ........ Which is why I only ever build one at a time!!

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 27, 2020, 07:09:13 AM
Catching up (again....story of my life....). That is a really original idea to put the two figures next to the Luke aircraft Rick. The model looks excellent already - it can only get better when it is rigged.

The thought of rigging three aircraft at the same time gives me the ........ Which is why I only ever build one at a time!!

Stephen.

Thanks Stephen as always I appreciate your comments!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: GazzaS on July 28, 2020, 07:39:28 AM
Love the base and figgies, Rick!  That sodden field look is mui perfecto!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on July 28, 2020, 10:56:37 AM
Better make sure those spiders have a few beers and extra break for them  ;) Don't need some union up rising and they walk out on you . I can can see it in the head lines now .....Spiders no longer string rope  ! At the local Rick Spad factory workers went on strick for the lack breaks a spoke person says on behalf of the little critters .....




Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 28, 2020, 08:31:24 PM
Love the base and figgies, Rick!  That sodden field look is mui perfecto!

Thanks Gaz. The base has quite a way to go before it is done!
RAGIII

Better make sure those spiders have a few beers and extra break for them  ;) Don't need some union up rising and they walk out on you . I can can see it in the head lines now .....Spiders no longer string rope  ! At the local Rick Spad factory workers went on strick for the lack breaks a spoke person says on behalf of the little critters .....




Terri

No Need to worry Terri, My Spiders can't even think of starting without a couple of Beers to calm the nerves  ;D
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 29, 2020, 08:01:10 AM
and so it Begins  ::)
RAGIII



(https://i.postimg.cc/zfZ0QnPm/116437502-3819908941369483-207930615792693605-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on July 29, 2020, 08:23:19 AM
Spiderage...at last.
Looking good Rick.
ap
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on July 29, 2020, 11:03:31 AM
Give those guys a beer  :)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on July 29, 2020, 09:56:22 PM
Woohoo! Eddie's ship is nearly rigged and ready to fly.  :)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on July 29, 2020, 10:20:38 PM
Looking forward to seeing these completed soon.
Excellent effort on all three, Rick.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on July 30, 2020, 12:40:23 AM
RAGIII,
Your project must be getting near the closing stage. The three lined up will only convince the rest of us
to stop dragging or collective feet and to get started building or own stashed, dust collectors.

                                                                                              Thanks for the inspiration,
                                                                                                                            Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: bobs_buckles on July 30, 2020, 01:14:45 AM
...and soon it will end.

 :)

vB
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 31, 2020, 01:35:30 AM
Thanks Guys and Gal! There May be a light at the end of the tunnel  :o
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on July 31, 2020, 08:57:42 AM
So all of the auxiliary rigging is Now complete on all three SPADS. I will next paint the completed rigging then start on the main wing rigging.
RAGIII




(https://i.postimg.cc/1tCygght/116642750-3823018397725204-312272541715590680-n.jpg)



(https://i.postimg.cc/HjGD5XSp/116865847-3825870990773278-7938991869041317959-n.jpg)



](https://i.postimg.cc/KYQ2VKYN/116708695-3825950477431996-1737413422713570916-n.jpg)



(https://i.postimg.cc/HWrrwmSK/116825121-3825871870773190-8851537926639649451-n.jpg)



(https://i.postimg.cc/65GB35HW/116702750-3825871654106545-6032310426936187306-n.jpg)



(https://i.postimg.cc/FKhvDbhz/116706770-3825871294106581-5051893947702220694-n.jpg)

PS: The "Cunning Plan" for rigging was to use Heat Stretched Sprue. Old school but still works  8)

Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on July 31, 2020, 09:44:57 AM
Tried and true, heat that sprue
Looking real good Rick.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on July 31, 2020, 10:02:15 AM
Looking great RAGIII!

                       Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Brad Cancian on July 31, 2020, 12:30:14 PM
Beautiful!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on July 31, 2020, 10:50:23 PM
 8)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on August 01, 2020, 10:36:59 PM
I see many , many beers in the future  ;) Excellent work so far Rick  :)



Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 01, 2020, 11:50:45 PM
Tried and true, heat that sprue
Looking real good Rick.
sp
Thanks SP. Yep HSP is still a viable method  ;D
RAGIII


Looking great RAGIII!

                       Kevin


Thanks Kevin!
RAGIII


8)


Thanks for looking in Brad, and the kind comment!
RAGIII


8)


Thanks Ken  :)
RAGIII


I see many , many beers in the future  ;) Excellent work so far Rick  :)



Terri

Thanks Terri! Yes a Lot of Beers to steady MY hands  ::)
RAGIII

PS: Just saw Dave's Roden announcement. It is a good thing I started these when I did otherwise they Might have never been built
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on August 02, 2020, 03:34:12 AM
They look good Rick. With all of that rigging in one go I can see a pusher on your horizon: after all there would be less on one pusher than these three Spads!!

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on August 02, 2020, 04:43:51 AM
I'm liking the sprue rigging very much Rick, it certainly works a treat in your hands.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: jeroen_R90S on August 02, 2020, 10:48:08 PM
Wow, these look good! Although the scheme is seen often, I still like the Rickenbacker version! :)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 03, 2020, 01:25:49 AM
They look good Rick. With all of that rigging in one go I can see a pusher on your horizon: after all there would be less on one pusher than these three Spads!!

Stephen.

Thanks Stephen. If there was a decent Injection kit in any scale of the FB5(Not ready for Paper  ;D ) I would be tempted!
RAGIII


I'm liking the sprue rigging very much Rick, it certainly works a treat in your hands.

Thanks Richie. So far the HSP rigging is not unusual for MY builds. I have used it on Many/ Most of My Models for bracing and control wires  :o This will be the first time in quite a while that I will be doing it all this way!
RAGIII


Wow, these look good! Although the scheme is seen often, I still like the Rickenbacker version! :)

Thanks for the comments. I agree that one sees the Rickenbacker scheme often. I originally had No Intention to do EVR's scheme but decided it belonged in My collection  ;D I only wish there was a decent Rickenbacker Figure in 1/32nd.
RAGIII


Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: gedmundson on August 03, 2020, 03:07:15 AM
Exceptional work Rick - looking great!
Cheers,
Gary
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 03, 2020, 08:45:15 AM
Exceptional work Rick - looking great!
Cheers,
Gary


Thanks Gary! Here is the latest. The Guynemer SPAD has the main wing rigging started.
RAGIII


(https://i.postimg.cc/ydnjy4sQ/117042965-3835160176511026-3255730299333967052-n.jpg)



(https://i.postimg.cc/HsF22t1g/117103551-3835159873177723-8338830716248449008-n.jpg)



(https://i.postimg.cc/d3p85JXB/117231683-3835160263177684-8966394909065589864-n.jpg)



(https://i.postimg.cc/g2RKB6G6/117115879-3835159993177711-7462653939536548048-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Radarman on August 03, 2020, 09:15:38 AM
RAGIII,
It looks like your bench time has been well spent.

                                                        Kevin
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on August 03, 2020, 10:52:40 AM
Hitting the middle on that H strut ain't easy...you just make it look that way.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on August 03, 2020, 10:02:30 PM
great looking work with that sprue rigging.  Turnbuckles, even.
I can't get sprue to stretch evenly and consistently to save my life!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 04, 2020, 12:29:41 AM
RAGIII,
It looks like your bench time has been well spent.

                                                        Kevin

Thanks Kevin!
RAGIII


Hitting the middle on that H strut ain't easy...you just make it look that way.
sp

Not as difficult as the next wires  ::)  Thanks for the comment!
RAGIII


great looking work with that sprue rigging.  Turnbuckles, even.
I can't get sprue to stretch evenly and consistently to save my life!


Thanks Ken. As for stretching the sprue evenly I don't do too badly but I do eliminate about half of what I actually stretch. Then I usually let about half of that accidentally slip from the tweezers to the carpet while trying to add it to the airframe  :o
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on August 04, 2020, 12:46:42 AM
Stretched sprue us always too thin in the middle and too thick at the ends, but there are a couple sections on each pull that are usable. On a 24-30 inch pull, I can usually harvest a couple of usable sections 6-8 inches long from either side of the middle. Plenty usable in 1/72 and most 1/48 single seaters. You also get the advantage of being able to use noticeably thinner line for the control cables. You have to be ruthless in throwing out unusable pieces, otherwise you will be tempted to use them rather than stopping to make more once you get on a roll rigging.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on August 04, 2020, 02:21:51 AM
Stretching sprue to that length consistently takes some skill and patience Rick. Cracking stuff - good luck with the continuation of this project.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Old Man on August 04, 2020, 05:09:31 AM
This is great stuff, Sir.

I salute your wizardry at stretching sprue.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 04, 2020, 06:12:13 AM
Stretched sprue us always too thin in the middle and too thick at the ends, but there are a couple sections on each pull that are usable. On a 24-30 inch pull, I can usually harvest a couple of usable sections 6-8 inches long from either side of the middle. Plenty usable in 1/72 and most 1/48 single seaters. You also get the advantage of being able to use noticeably thinner line for the control cables. You have to be ruthless in throwing out unusable pieces, otherwise you will be tempted to use them rather than stopping to make more once you get on a roll rigging.
sp

Yep, One is lucky to get 50% usable.  8)
RAGIII


Stretching sprue to that length consistently takes some skill and patience Rick. Cracking stuff - good luck with the continuation of this project.

Stephen.

Thanks Stephen. Ihave been stretching Sprue for at least 40 years so the practice is certainly there...if not always the patience  :o
RAGIII



This is great stuff, Sir.

I salute your wizardry at stretching sprue.

Thanks Old Man ! The real challenge is to try to make it not so obvious that it is Sprue  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on August 04, 2020, 06:54:36 AM
Wow Rick, that is one seriously beautiful bit of modelling. A great tribute to the brave young man.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: macsporran on August 04, 2020, 07:01:52 AM
Excellent Spads. And the art of sprue resurrected!
Of course you realise by fettling these lovely creations out of old kits you have nudged the laws of the universe and caused Roden to announce new S.XIIIs forthwith.
S
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 04, 2020, 07:18:19 AM
Wow Rick, that is one seriously beautiful bit of modelling. A great tribute to the brave young man.

Thanks Richie, Greatly appreciated!
RAGIII


Excellent Spads. And the art of sprue resurrected!
Of course you realise by fettling these lovely creations out of old kits you have nudged the laws of the universe and caused Roden to announce new S.XIIIs forthwith.
S


Thanks for the positive comment! As for the rules of the universe I am Happy to have Helped  ;D I actually would love to do 3 more, SPA 67, De Sevin, and Hartney...Maybe even Rene Fonck for a fourth  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: dr 1 ace on August 06, 2020, 03:55:47 AM
Almost There--looking good.

Ed
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 06, 2020, 04:47:01 AM
Almost There--looking good.

Ed

Thanks Amigo!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: fredjocko on August 06, 2020, 11:01:32 PM
Those are looking fantastic! I really like the rigging.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 07, 2020, 11:15:12 AM
Those are looking fantastic! I really like the rigging.

Thanks Carl! It has been a Frustrating week. I just seem to be unable to get any more wires mounted properly. Put them down and worked on figures today. I will go back to them in a few days and try to push through  :(
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on August 07, 2020, 12:54:55 PM
Looking reaalllly good Rick  :)



Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: fredjocko on August 07, 2020, 09:02:38 PM
Those look fantastic!! Makes me want to dig mine out and build it.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 08, 2020, 07:45:31 AM
Looking reaalllly good Rick  :)



Terri

Thanks Terri, another frustrating day today. More to come!
RAGIII


Those look fantastic!! Makes me want to dig mine out and build it.

Thanks again Carl. I tried yet again to add the double lines on one of the SPADS. Total frustration! So I have tried something I hope will help with My issues. I took some double rigging turnbuckles from a leftover Part set for the Nieuport 28. I attached them to the areas giving me issues. I am hoping that this will allow an easier fit and attachment of the Stretched Sprue  :-\
RAGIII


(https://i.postimg.cc/2ynkzJF4/117310053-3850345134992530-136807933610413605-n.jpg)



(https://i.postimg.cc/3R4rqWkf/117386086-3850345554992488-8799499073464903106-n.jpg)

PS: If anyone has the PART PE set for the Nieuport 28 in 1/32nd and doesn't plan to use the turnbuckles Part # 117, I will pay a reasonable price for all you have!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: petrov27 on August 08, 2020, 09:24:03 AM
Heya Rick I can send ya Part N28 turnbuckles - just PM me where to send.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on August 08, 2020, 09:55:51 AM
Yeah , I can understand your frustration with the double rigging Rick , hope your solution works out for you . The finishing line is soooo close  :D ;) :)



Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 08, 2020, 10:51:34 AM
Heya Rick I can send ya Part N28 turnbuckles - just PM me where to send.

I will send a PM!
RAGIII


Yeah , I can understand your frustration with the double rigging Rick , hope your solution works out for you . The finishing line is soooo close  :D ;) :)




Terri

I think it has to do with aging. I never had this much trouble in the past  ::)
RAGIII

Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on August 08, 2020, 06:05:48 PM
Great perseverance Rick, you can do this. We get more dogged as we get older so I know you will win the day and have 3 completed  stunning Spads soon.

Richie
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on August 09, 2020, 02:35:29 AM
Double wires are a d...d nuisance Rick: when they built those machines they were certainly not thinking of modellers 100+ years later!! Like Richie I am sure that you will get the problem sorted out and have three tremendous Spads on the shelf before too long.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on August 09, 2020, 06:32:36 AM
The rigging will not defeat you!  Soldier on, Spadman!

Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 09, 2020, 09:14:58 AM
Thanks Guys, I will Not Go Quietly Into the Night ! No surrender at this point  ::)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on August 09, 2020, 10:39:26 AM
Rick
It boils down to, "Are you or are you not ornerier than a melted piece of styrene?" I have no doubt you are ornerier. :-)
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on August 09, 2020, 07:54:12 PM
Thanks Guys, I will Not Go Quietly Into the Night ! No surrender at this point  ::)
RAGIII

That's the spirit Rick, you shall prevail!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 11, 2020, 09:11:06 AM
So I am continuing to work on the rigging but won't be able to complete until I have the PE trurnbuckles.
RAGIII


(https://i.postimg.cc/kMK7bL88/117445476-3859405070753203-6850745580394887348-n-1.jpg)




(https://i.postimg.cc/FsxmPcTH/117809939-3859404840753226-7367076591965990291-n-1.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on August 11, 2020, 11:20:13 AM
So take a well earned break. What you have looks just great!
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on August 12, 2020, 03:53:48 AM
Rick, that looks cool! Take your time ...
All 2 SPADs will need a lot of PE?

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on August 12, 2020, 04:10:08 AM
Rick, I still marvel at your colors and finish on these birds--it looks so appealing and spot on!  I really like what you have created. 

The rigging will get done in due course, so no worries. ;D 

Best regards,

Bob
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on August 12, 2020, 05:36:17 AM
The rigging on that one is super! Do you fancy rigging my DH 1A? Just a small challenge for a man with your talents!!!

If the other two are as good as this (as I am sure they will be), then you will have a magnificent trio.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on August 12, 2020, 10:00:24 AM
Master rigger !  ;)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 14, 2020, 04:18:19 AM
Once again Thanks to All for the Support. I might have given up without the encouragement !
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on August 14, 2020, 06:46:24 AM
and still working on the base for the Luke bird:

RAGIII



(https://live.staticflickr.com/65535/50223267851_816f3264b2_c.jpg)


PS: Still a LONG way to go!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on August 14, 2020, 09:49:43 AM
I'm liking the base Rick ...oh yeah the spad as well  ;)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Gisbod on August 14, 2020, 04:25:34 PM
Beautiful Rick,

I’ve always felt it was an omission that WNW never did a Spad, and now they never will, but you’ve made that one look like they did!

Guy

Ps I love those colours.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: NinetythirdLiberator on August 15, 2020, 07:18:57 AM
That looks lovely, Rick.  You are rigging this so precisely and soooooo well.  Love watching this.
Well done...Dan  :)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 01, 2020, 05:55:35 AM
I am back on these three thanks to Patrick. I also have done some work on the figures to be displayed with the SAPDs'.  The Pegaso Luke figure is the FIRST ever using Acrylics for the flesh tones vs Oils. Any thoughts and recommendations welcomed!

RAGIII




(https://i.postimg.cc/xTQPkW5d/118715114-3927912823902427-16423644628658222-n.jpg)



(https://i.postimg.cc/tR33HBbG/118762231-3927913403902369-7952049224814293752-n.jpg)



(https://i.postimg.cc/bYkTwzQM/118707357-3927912970569079-6994380696766430561-n.jpg)



(https://i.postimg.cc/SxN7dCwF/118713059-3927913090569067-2493395134557058656-n.jpg)
















Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on September 02, 2020, 12:34:01 AM
I'd say Luke is turning out well!  I like how you've depicted him and his dramatic pose.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 02, 2020, 02:25:05 AM
I'd say Luke is turning out well!  I like how you've depicted him and his dramatic pose.

Thanks Ken. The pose will be a little "Less Dramatic" when the French Pilot is posed next to him  8) So far I am liking the Valejo acrylics but I have a lot to learn! It is a Shame No one does a Rickenbacker figure to go with his SPAD. I guess I will stick with an "Unknown" USAS pilot posing with #1.
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on September 02, 2020, 03:24:39 AM
Those tones look good to me Rick, but then I am not a figure painter either. I think that you painting skills are such that you will make all of your figures look realistic and they will certainly add to the completed model aircraft.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 02, 2020, 07:31:29 AM
Those tones look good to me Rick, but then I am not a figure painter either. I think that you painting skills are such that you will make all of your figures look realistic and they will certainly add to the completed model aircraft.

Stephen.

Thanks Stephen. Today was spent working on rigging. This will most likely be the worst rigging I have done in 40 years but I hope it will be marginally acceptable  ::)
RAGIII


(https://i.postimg.cc/HsRPHxGR/118761315-3931672460193130-1488594212131986296-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on September 02, 2020, 08:27:08 AM
Rick
That rigging looks great so far, light years ahead of what I could do. You have the wire running to the "H" strut leaving on the same angle it arrived on. That is a feat few can accomplish. I have banged my head against my hand all afternoon trying to figure a way to do those "H" struts in metal and I can't see how without expensive custom equipment.

Only thing I can think of is using carved wooden struts and to pin the cross bar with pins long enough to protrude out the front and back. Then use Gaspatch turnbuckles and hook each one over the protruding pin. You might have to use 1/48 size to keep the pin diameter smaller and also so the 4 wires don't stack up too far out of plane. Not real helpful I know, but all I could conjure up.

OTOH those Spads look so darn good, whose going to notice a whip-a-diddle in the rigging. (I know...you will)

sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on September 03, 2020, 01:41:31 AM
Rigging those centre struts must have been Bleriot's dig at future modellers! They look fine to me but I agree with Steve- they probably will look an eyesore to you!

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 03, 2020, 07:19:19 AM
Rick
That rigging looks great so far, light years ahead of what I could do. You have the wire running to the "H" strut leaving on the same angle it arrived on. That is a feat few can accomplish. I have banged my head against my hand all afternoon trying to figure a way to do those "H" struts in metal and I can't see how without expensive custom equipment.

Only thing I can think of is using carved wooden struts and to pin the cross bar with pins long enough to protrude out the front and back. Then use Gaspatch turnbuckles and hook each one over the protruding pin. You might have to use 1/48 size to keep the pin diameter smaller and also so the 4 wires don't stack up too far out of plane. Not real helpful I know, but all I could conjure up.

OTOH those Spads look so darn good, whose going to notice a whip-a-diddle in the rigging. (I know...you will)

sp


Thanks SP, JUst the boost I needed!
RAGIII


Rigging those centre struts must have been Bleriot's dig at future modellers! They look fine to me but I agree with Steve- they probably will look an eyesore to you!

Stephen.

Thanks Stephen, Greatly appreciate the support!
RAGIII

So today I went into My Modeling session with a New Attitude! I realized I have spent More time Whining than I have rigging  :-[ So today two of the three have the wires on the front completed minus final tightening with heat.

RAGIII


(https://i.postimg.cc/xdST9jRg/118765571-3935080333185676-7149384764932193742-n.jpg)



(https://i.postimg.cc/hGb4vFZn/118766460-3935080199852356-1225978047891611705-n.jpg)



(https://i.postimg.cc/D0DnH70r/118768090-3935080016519041-4526368065205499871-n.jpg)



(https://i.postimg.cc/vTDG04Y8/118768865-3935080416519001-857644742374353647-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on September 03, 2020, 09:18:40 AM
You are on a roll Rick , rigging is looking really sweet so for and it already looks tight . I also see that the pic's of the figures are back . I must say that you did a really nice job with the use of acrylics on painting the faces . How did you find them ?


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 05, 2020, 07:48:43 AM
You are on a roll Rick , rigging is looking really sweet so for and it already looks tight . I also see that the pic's of the figures are back . I must say that you did a really nice job with the use of acrylics on painting the faces . How did you find them ?


Terri


Thanks Terri. I am progressing on the rigging and have one of the three close to being finished. As for My experience with painting figures with Acrylics, I really like them. One must consider that it is a different process than using Oils. I have watched a couple of Videos and the one thing that was very different was starting with highlights.I do like the drying time difference but will need to work on the whole "wet" pallet thing.  I have MUCH to learn so hopefully My future figures will get better  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 06, 2020, 11:29:34 AM
Rigging done on the Rickenbacker SPAD, just need to paint and touch up a few wires.
RAGIII



(https://i.postimg.cc/fR4tVJ0X/118990048-3945321858828190-713629391462419101-n.jpg)



(https://i.postimg.cc/QMhFqwmd/118995392-3945321475494895-6308911385224013805-n.jpg)

PS: I have also begun the Rickenbacker Bust. Still Lots to do:


(https://i.postimg.cc/Hs88WQjd/118906090-3945322052161504-848306172897029893-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Vickers on September 06, 2020, 11:37:27 AM
That is one beautiful SPAD, Rick. This has been a very enjoyable build to follow and you've really knocked this one out of the park. More pics!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on September 06, 2020, 11:45:02 AM
Can't tell you had a lick of trouble with the struts and rigging. You really completed a fine Spad and set the bar higher for us all.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on September 06, 2020, 11:18:24 PM
Now that is going to look beautiful in my display case  ;)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on September 07, 2020, 12:35:10 AM
The rigging is very nice!
What is the source of that PE parts? If that is from a set of the company 'Parts' may be there is a 1/48 SPAD set too.

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Europapete on September 07, 2020, 12:46:27 AM
Awesome build Rick, and a hearty congrats on the rigging. Well done. Regards Pete in RI
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 07, 2020, 01:02:04 AM
That is one beautiful SPAD, Rick. This has been a very enjoyable build to follow and you've really knocked this one out of the park. More pics!

Thanks for the Kind comment! One down and two to go  8) More pics when all three are done!
RAGIII


Can't tell you had a lick of trouble with the struts and rigging. You really completed a fine Spad and set the bar higher for us all.
sp

Thanks SP, your support and suggestions have been appreciated ! The three SPADS won't win any contests but will look good in the case from 3 feet out  ;D
RAGIII


The rigging is very nice!
What is the source of that PE parts? If that is from a set of the company 'Parts' may be there is a 1/48 SPAD set too.

Cheers,
Frank

Thanks Terri! I appreciate you following along!
RAGIII


The rigging is very nice!
What is the source of that PE parts? If that is from a set of the company 'Parts' may be there is a 1/48 SPAD set too.

Cheers,
Frank

Thanks Frank! The PE is from the 1/32nd scale Nieuport 28 set by Part. I know they make one in 1/48th but perhaps they make a set for the 13 or 7 in that scale also. With your talent in making struts and soldering I am sure you will make a far better effort when you build yours!
RAGIII


Awesome build Rick, and a hearty congrats on the rigging. Well done. Regards Pete in RI

Thanks Pete. Greatly appreciate your comments!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: FAf on September 07, 2020, 07:01:53 AM
Great looking planes as well as figures! I've been so inspired that I've started on an Eduard SPAD kit... It's resting until I've finished some other stuff though.
/Fredrik
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 07, 2020, 08:24:57 AM
Great looking planes as well as figures! I've been so inspired that I've started on an Eduard SPAD kit... It's resting until I've finished some other stuff though.
/Fredrik

Thanks Fredrik! I am sure the Bust will get stripped at least once but the others are moving along nicely  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kensar on September 08, 2020, 02:09:46 AM
The SPAD looks terrific, Rick!  This will really be a display when all three are finished side by side.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 08, 2020, 07:54:48 AM
The SPAD looks terrific, Rick!  This will really be a display when all three are finished side by side.

Thanks Ken! SPAD XIII #2 is now almost complete. Lukes bird has the main rigging done and just needs touch up and some wires painted.
RAGIII



(https://i.postimg.cc/MHGkgcVL/119011525-3951631808197195-7012771985883649831-n.jpg)



(https://i.postimg.cc/N08WM8xV/119058815-3951631931530516-1379694907035012003-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on September 09, 2020, 01:13:07 AM
Two lovely Spads almost done Rick. The figures/bust are also shaping into stunning additions to the aircraft. These are going to look very eye-catching indeed in the display cabinet.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 09, 2020, 02:15:41 AM
Two lovely Spads almost done Rick. The figures/bust are also shaping into stunning additions to the aircraft. These are going to look very eye-catching indeed in the display cabinet.

Stephen.

Thanks Stephen. One More to go now, then the final touch up on all three  8)
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RichieW on September 09, 2020, 03:10:37 AM
Hiya Rick, hope you're well. I've been away for a while desperately trying to rebuild my guitar technique after breaking my thumb. The Spads are looking terrific. I still have a particular fondness for Eddie's bird but that's only because he was such an extroverted aventurer and I built (extremely badly) a 1/72 version under the supervision of my dad when I was 7.  :)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on September 09, 2020, 04:53:56 AM
All are great so far but I think Luke's machine will be my favorite!

Rick is "Das tapfere Schneiderlein" (The Brave Little Tailor) (https://en.wikipedia.org/wiki/The_Brave_Little_Tailor): SevenThree at One Blow!

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 09, 2020, 07:02:07 AM
Hiya Rick, hope you're well. I've been away for a while desperately trying to rebuild my guitar technique after breaking my thumb. The Spads are looking terrific. I still have a particular fondness for Eddie's bird but that's only because he was such an extroverted aventurer and I built (extremely badly) a 1/72 version under the supervision of my dad when I was 7.  :)


Thanks Richie and Great to have you back! You should have another reason to Like the EVR SPAD, Your Masks for the Numbers on the wings made it all Happen!
RAGIII


All are great so far but I think Luke's machine will be my favorite!

Rick is "Das tapfere Schneiderlein" (The Brave Little Tailor) (https://en.wikipedia.org/wiki/The_Brave_Little_Tailor): SevenThree at One Blow!

Cheers,
Frank

Thanks Frank! I think the Luke bird could also be My Favorite  8) I only hope I can get Three with one blow!
RAGIII


The rigging on the front is complete on the Guynemer SPAD. All that is left is the double wires on the rear, then painting the wires and turnbuckles.
RAGIII



(https://i.postimg.cc/Rh6XX2Z8/119067835-3954982577862118-2476337631147279794-n.jpg)




(https://i.postimg.cc/mkvVqVcr/119068163-3954982424528800-264738391687646962-n.jpg)

Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: rhallinger on September 09, 2020, 08:02:04 AM
Fabulous SPADS Rick!  I can only hope that my future models of this aircraft turn out nearly as well.  A magnificent effort, rewarded with truly fine results.  Very well done, indeed!

Best regards,

Bob 
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Alexis on September 09, 2020, 10:09:53 AM
The finishing line is very close , man she looks beautiful  :)


Terri
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: pepperman42 on September 09, 2020, 11:18:11 AM
Very sharp!!

Steve
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Dave W on September 09, 2020, 11:41:54 AM
Awesome work Rick. Your Spads show just why these subjects are so popular. The Guynemer Spad is one I've thought of doing too and your model is strong encouragement for me to get going on this one now!

Figures really set off these models so well too as they give us a visual perspective of aircraft size.

Thanks for sharing with the Forum

cheers

Dave Wilson
Gold Coast
Australia
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: NinetythirdLiberator on September 09, 2020, 01:44:45 PM
Frank looks ready to go balloon bustin'.  Great job.  These are REALLY wonderful models you are producing!
Dan :)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Early Bird Fan on September 09, 2020, 04:36:35 PM
that's a lovely looking model  8)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 09, 2020, 10:41:49 PM
Fabulous SPADS Rick!  I can only hope that my future models of this aircraft turn out nearly as well.  A magnificent effort, rewarded with truly fine results.  Very well done, indeed!

Best regards,

Bob

Thanks Bob. I am sure when you do a SPAD it will be far better  8)
RAGIII


The finishing line is very close , man she looks beautiful  :)


Terri

Thanks Terri!
RAGIII


Very sharp!!

Steve

Thanks Steve!
RAGIII


Awesome work Rick. Your Spads show just why these subjects are so popular. The Guynemer Spad is one I've thought of doing too and your model is strong encouragement for me to get going on this one now!

Figures really set off these models so well too as they give us a visual perspective of aircraft size.

Thanks for sharing with the Forum

cheers

Dave Wilson
Gold Coast
Australia

Thanks Dave. Greatly appreciated!
RAGIII


Frank looks ready to go balloon bustin'.  Great job.  These are REALLY wonderful models you are producing!
Dan :)

Thanks Dan. I appreciate the comments!
RAGIII


that's a lovely looking model  8)

Thanks, I appreciate the comment!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Old Man on September 10, 2020, 12:16:49 AM
These are all looking fabulous, Sir!

Top-notch work, real 'shrink-ray and a time machine' stuff.

Especially nice to see it done with middle grade kits, as well.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: FAf on September 10, 2020, 12:35:05 AM
You work continues to deliver and inspire!
/Fredrik
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 10, 2020, 10:42:12 PM
These are all looking fabulous, Sir!

Top-notch work, real 'shrink-ray and a time machine' stuff.

Especially nice to see it done with middle grade kits, as well.

Thanks for the kind comments!
RAGIII


You work continues to deliver and inspire!
/Fredrik

Thanks Fredrik!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 12, 2020, 07:12:05 AM
I am calling the three SPADs done. Lots I could have / Should have done but OH Well.
RAGIII


(https://i.postimg.cc/tTvXdB1g/119204901-3965333196827056-5865048247814443103-n.jpg)




(https://i.postimg.cc/rw2q90p5/119221855-3965335320160177-3878178957273129551-n.jpg)



(https://i.postimg.cc/Qx9MmZJZ/119151945-3965334813493561-3443782772053709205-n.jpg)
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: petrov27 on September 12, 2020, 07:27:44 AM
They look brilliant - congrats on completing THREE amazing builds of a great subject!
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: smperry on September 12, 2020, 07:31:06 AM
Simply beautiful Rick. Well done sticking with a long project.
sp
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: PrzemoL on September 12, 2020, 08:06:35 AM
Triple bravo, Rick. You have done incredibly great job on them. I admire your resolution to tackle such kits. And right on time you did it, seemingly - now to expect fulfilment of Roden's promise and let us see if they realease that up-to-date Spad13.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Early Bird Fan on September 12, 2020, 03:43:23 PM
All 3 look amazing and deserve a spot on the front of the shelf, give yourself a pat on the back and have a lie down  ;D
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: macsporran on September 12, 2020, 06:00:40 PM
Beautiful models, Rick, as always. You've shown how a lot of skill, care and attention can turn these old warhorses into museum quality masterpieces. And your build rate.... Do you spend the full 24hrs at the bench? Marvellous results.
Sandy
P.S. I love Danny Kaye standing by his SPAD😃
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Monty on September 12, 2020, 09:17:00 PM
Stellar builds, Rick! Lovely, just lovely! To see three built like that is very special.... Amazing! Marc.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: FAf on September 12, 2020, 09:58:16 PM
Well done! Beautiful builds all of them!
/Fredrik
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: kkarlsen on September 13, 2020, 12:15:54 AM
Great results on the SPAD's Rick - I would like to have each one of them in my collection!

Kent
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 13, 2020, 12:48:23 AM
A Large thanks for all of the Positive comments. Also thanks to all for the assistance especially to Richie for the masks for Rickenbackers #1!
RAGIII
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: lone modeller on September 13, 2020, 06:11:52 AM
Three tremendous builds there Rick. Just making one would have been enough for me - to make three is a real achievement. All are beautifully finished - something to be very proud of.

Stephen.
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: Bughunter on September 13, 2020, 06:39:26 AM
Beautiful result - all three are very nice SPADs!
And also congratulation for your build report! You managed to fill up 47 pages of entertainment until now 8)

Cheers,
Frank
Title: Re: Hobby Craft 1/32nd SPAD XIII times Three: plus Aviattic Luke
Post by: RAGIII on September 13, 2020, 06:58:07 AM
Three tremendous builds there Rick. Just making one would have been enough for me - to make three is a real achievement. All are beautifully finished - something to be very proud of.

Stephen.

Thanks Stephen your comments are appreciated. Honestly speaking had I not started and built all three at once I probably would have two sitting in the stash unbuilt for years!
RAGIII

Beautiful result - all three are very nice SPADs!
And also congratulation for your build report! You managed to fill up 47 pages of entertainment until now 8)

Cheers,
Frank

Thanks Frank! Hopefully there are a few things in those "47" pages worth looking at  ;D
RAGIII

Now in Completed Models:

https://forum.ww1aircraftmodels.com/index.php?topic=11520.0