forum.ww1aircraftmodels.com
WW1 Aircraft Modeling => Under Construction => Topic started by: xan on February 04, 2020, 10:50:12 PM
-
Hi I start this model one year ago. Meanwhile I did another model, so I open this topic for the rework of the Pfalz.
this means I have first to do a resume of the build:
I choose to represent this plane:
(https://nsm09.casimages.com/img/2019/05/31//19053111400023469216258038.jpg)
the pilot Busso von Abensleben was a young of a Saxon lord family:
(https://nsm09.casimages.com/img/2019/05/31//19053111441623469216258050.jpg)
(https://nsm09.casimages.com/img/2019/05/31//19053111441523469216258046.jpg)
He flew in Jasta 21.
In June of 1918, the 14th, he shot down a ballon but was shot down too by a french hunter.
He was prisoner and died the day after.
No brillant ace in this story, but the real face of this: death without glory.
The plastic sprues shows tha wings ribbs are very caricaturals and I decade to redo them:
(https://nsm09.casimages.com/img/2019/06/03//19060311581923469216261406.jpg)
I use first the second pair odf wings given in the box as a test:
(https://nsm09.casimages.com/img/2019/06/03//19060311574823469216261405.jpg)
(https://nsm09.casimages.com/img/2019/06/07//19060706483323469216264978.jpg)
(https://nsm09.casimages.com/img/2019/06/07//19060706483323469216264980.jpg)
(https://nsm09.casimages.com/img/2019/06/07//19060706483323469216264981.jpg)
(https://nsm09.casimages.com/img/2019/06/07//19060706483423469216264982.jpg)
(https://nsm09.casimages.com/img/2019/06/10//19061009193423469216268969.jpg)
as I was happy with the result I applied this technic on the wings:
(https://nsm09.casimages.com/img/2019/06/13//19061306305023469216272888.jpg)
for the upper wing I took of the tank because it was under the plywood:
(https://nsm09.casimages.com/img/2019/06/16//19061608212223469216276256.jpg)
(https://nsm09.casimages.com/img/2019/06/16//19061611343923469216276500.jpg)
(https://nsm09.casimages.com/img/2019/08/28//19082812193923469216380354.jpg)
Xan
-
The stringers have really turned out well! Your usual Fantastic start and presentation!
RAGIII
-
Then I did the propeler:
(https://nsm09.casimages.com/img/2019/06/24//19062408112323469216284626.jpg)
(https://nsm09.casimages.com/img/2019/06/24//19062408164623469216284627.jpg)
(https://nsm09.casimages.com/img/2019/06/24//19062408062823469216284625.jpg)
(https://nsm09.casimages.com/img/2019/06/24//19062410275123469216284775.jpg)
(https://nsm09.casimages.com/img/2019/06/24//19062410275123469216284776.jpg)
Xan
-
Well , you have my full attention !
Terri
-
Stellar work, Xan.
Cheers,
Gary
-
The engine:
(https://nsm09.casimages.com/img/2019/06/29//19062901530223469216292044.jpg)
Then I did the fuselage
outside:
(https://nsm09.casimages.com/img/2019/06/30//19063001315723469216292918.jpg)
(https://nsm09.casimages.com/img/2019/06/30//19063001315823469216292919.jpg)
(https://nsm09.casimages.com/img/2019/06/30//19063001315823469216292920.jpg)
photoetchehttps://forum.ww1aircraftmodels.com/Themes/actualism_202/images/bbc/img.gifd
(https://nsm09.casimages.com/img/2019/07/05//19070510044223469216300198.jpg)
and inside:
(https://nsm09.casimages.com/img/2019/07/10//19071009325423469216306832.jpg)
(https://nsm09.casimages.com/img/2019/07/10//19071009325423469216306833.jpg)
(https://nsm09.casimages.com/img/2019/08/28//19082812194023469216380358.jpg)
(https://nsm09.casimages.com/img/2019/08/30//19083011305923469216385737.jpg)
(https://nsm09.casimages.com/img/2019/08/28//19082812194023469216380357.jpg)
(https://nsm09.casimages.com/img/2019/08/30//19083011305923469216385736.jpg)
(https://nsm09.casimages.com/img/2019/09/02//19090203243523469216388814.jpg)
(https://nsm09.casimages.com/img/2019/09/02//19090203243523469216388815.jpg)
Xan
-
Excellent job the fuselage details 8)
Terri
-
Thanks for the summary of how you got here - very impressive photo documentation! Could you explain a little about how you applied the wing ribs -- looks like you used some sort of transfer tape?
Gene K
-
Prop, Interior details, fuselage upgrades with PE, etc. are all Superb!
RAGIII
-
Could you explain a little about how you applied the wing ribs -- looks like you used some sort of transfer tape?
Yes I use a plotter (silhouette prtrait) the mask was drawn according to a drawing with studio silhouette software so i was sure the ribs will be propely parallel
Xan
-
Hey, xan, you are back with an amazing approach to the Pfalz. I really like it, especially the wing tapes and the seat.
A bientôt
Andreas
-
Hi Andreas! we are missing you in "la guerre aérienne"!
the wings are mounted
(https://nsm09.casimages.com/img/2019/09/04//19090410355923469216393543.jpg)
In the Eduard model, the jonction between wings and fuselage is not "soft" enough:
(https://nsm09.casimages.com/img/2019/09/18//19091805230523469216413864.jpg)
(https://nsm09.casimages.com/img/2019/09/18//19091805221823469216413859.jpg)
I added a lot of surfacer to correct it:
(https://nsm09.casimages.com/img/2019/09/18//19091805230423469216413863.jpg)
-
Well done on the wing fillet! Your Pfalz looks Terrific closed up!
RAGIII
-
Xan, you are doing a nice job on this great kit (I liked it a lot!).
Since Cristmas I own such plotter too and you give here great ideas for additional usages.
Cheers,
Frank
-
The tail now:
(https://nsm09.casimages.com/img/2020/01/30//20013009005123469216624774.jpg)
(https://nsm09.casimages.com/img/2020/02/01//20020112085523469216627343.jpg)
(https://nsm09.casimages.com/img/2020/02/01//20020109411223469216627627.jpg)
I forgoten this detail:
(https://nsm09.casimages.com/img/2020/02/01//20020109411223469216627626.jpg)
(https://nsm09.casimages.com/img/2020/02/01//20020109411223469216627628.jpg)
(https://nsm09.casimages.com/img/2020/02/01//20020108342023469216629228.jpg)
ready to receive the first coat:
(https://nsm09.casimages.com/img/2020/02/01//20020108342123469216629229.jpg)
-
Done:
(https://nsm09.casimages.com/img/2020/02/02//20020210393923469216629826.jpg)
and also the mask for crosses (none of them are the same)
(https://nsm09.casimages.com/img/2020/02/02//20020210393923469216629825.jpg)
-
Beautiful construction and Detailing! Looks larger than 1/48th!
RAGIII
-
this is the decoration I choose
Painting time is approching so it is time to do some improvment with paint
About the white:
it won't be pure white so I tried mixing with blue or beige...
(https://nsm09.casimages.com/img/2020/02/04//20020410323723469216633402.jpg)
(https://nsm09.casimages.com/img/2020/02/05//20020505505423469216634359.jpg)
(https://nsm09.casimages.com/img/2020/02/05//20020505505523469216634360.jpg)
It will be white with beige...
About the black , there is no black paint in it!!!
I mixed primary colors (yellow red and blue) with a double of blue to reach a blueish black:
(https://nsm09.casimages.com/img/2020/02/05//20020505542323469216634365.jpg)
-
I Love your scientific approach to the colors! Looks Great!
RAGIII
-
Great choice of colors!
(I‘ll be back on guerre aerienne soon, promised)
Andreas
-
An interesting approach to finding colors to use. You will no doubt learn a lot by mixing your own colors.
And, great detailing on this model!
-
Start painting!
The Pfalz were painted in factory in silvergrau color
(https://i.postimg.cc/SsMQL0Ln/IMG-20190430-160742.jpg)
Busso plane was repainted but not the indersurfaces
I use AK's Extrem metal Matt aluminium
(https://images-eu.ssl-images-amazon.com/images/I/41JYJ-K1ivL._SL500_AC_SS350_.jpg)
(https://nsa40.casimages.com/img/2020/02/13/200213085238374857.jpg)
(https://nsa40.casimages.com/img/2020/02/13/200213085238707755.jpg)
I added a few humbrol white
(https://nsa40.casimages.com/img/2020/02/13/200213085239204851.jpg)
(https://nsa40.casimages.com/img/2020/02/13/200213085239796990.jpg)
and humbrol black.
(https://nsa40.casimages.com/img/2020/02/13/200213085240138109.jpg)
abase color diluated
(https://nsa40.casimages.com/img/2020/02/13/200213085240538690.jpg)
Xan
-
Outstanding pre shading and painting! Really looking awesome!
RAGIII
-
Outstanding pre shading and painting! Really looking awesome!
RAGIII
Second this , outstanding :)
Terri
-
incredible I painted the cross in the wrong way!!! ;D
(https://nsm09.casimages.com/img/2020/02/16//20021606583123469216649716.jpg)
Better like that!
(https://nsm09.casimages.com/img/2020/02/16//20021606583123469216649717.jpg)
Xan
-
You recovered well from the small cross painting Mishap! The crosses look Terrific!
RAGIII
-
Ouch! But nice recovery!
Beautiful build over all!
/Fredrik
-
I started painting the white:
12 flat white H2 / 1 sail color H85
(https://nsm09.casimages.com/img/2020/02/17//20021710461923469216651156.jpg)
Then in the ribbs an the trailing edge
12 flat white H2 / 3 sail color H85
(https://nsm09.casimages.com/img/2020/02/17//20021710461923469216651157.jpg)
Then pure white and base color diluated:
(https://nsm09.casimages.com/img/2020/02/17//20021710461923469216651158.jpg)
Quite happy with the result
Xan
-
I'm really enjoying your build so far , outstanding . Looking forward to the next up-date :)
Terri
-
masks are ready:
(https://nsa40.casimages.com/img/2020/02/19/20021909313995639.jpg)
masking mork is one a of this model challenge. there were quite hard to do and thit have been quite long too to place them in the model.
Next step, black paint!e!
Xan
-
Your masking for the Markings May be time consuming but they are really looking Terrific!
RAGIII
-
Yesterday it was "black friday"...
I melt the three primary colors to do my black. and put more blue than red and yellow (x2) because I wanted a blue shade...
(https://nsm09.casimages.com/img/2020/02/19//20021909021623469216653280.jpg)
(https://nsm09.casimages.com/img/2020/02/19//20021909021623469216653281.jpg)
Then paint!
(https://nsm09.casimages.com/img/2020/02/19//20021909021623469216653282.jpg)
I took of f the masks and here is the result
(https://nsm09.casimages.com/img/2020/02/19//20021909021623469216653283.jpg)
(https://nsm09.casimages.com/img/2020/02/19//20021909021723469216653284.jpg)
(https://nsm09.casimages.com/img/2020/02/19//20021909021723469216653285.jpg)
Xan
-
Well what can I say , fantastic so far :)
Terri
-
Stunning painting! Looks awesome!
RAGIII
-
Awesome paintjob!
Andreas
-
You build a wonderful thread ... as well as a beautiful model!
Are you using Oramask?
Gene K
-
Thanks
Yes I am.
-
Great paint job - a artist at work!
Cheers,
Frank
-
thanks guys!
Going on with the wing
(https://nsm09.casimages.com/img/2020/02/22//20022210230423469216655651.jpg)
L'overspray have corrected. crosses painted too.
I tried to put some light mixing black base with flesh color in the front part of the wing
Radiator ahve been painted with AK's dark alu rub'n buff and graphit.
And there to have a first idea of the final result
(https://nsm09.casimages.com/img/2020/02/22//20022212183023469216655751.jpg)
Xan
-
WOW! What beautiful paining! A truly Magnificent Build !
RAGIII
-
Thanks Rag!
The tail is done:
(https://nsm09.casimages.com/img/2020/02/24//20022404055823469216658247.jpg)
(https://nsm09.casimages.com/img/2020/02/24//20022404055823469216658248.jpg)
(https://nsm09.casimages.com/img/2020/02/24//20022404055823469216658249.jpg)
Xan
-
Beautiful, elegant build.
-
The skid and rigging on the tail look Fantastic!
RAGIII
-
I forgot photoetched part I was in time to add them:
(https://nsm09.casimages.com/img/2020/02/24//20022410264623469216659345.jpg)
the leather around the cockpit
(https://nsm09.casimages.com/img/2020/02/24//20022410264723469216659346.jpg)
(https://nsm09.casimages.com/img/2020/02/24//20022410264723469216659347.jpg)
Xan
-
Fantastic work, Xan. Great details and a very good paintjob.
Bye,
Manni
-
I agree with Manni - nice work.
-
Thank you friends!
A friend of mine told me the fuselage cross was too small: Damned he was right!
(https://nsm09.casimages.com/img/2020/02/26//20022605314123469216661745.jpg)
It is the kind of things that don't let me sleep by night so...
(https://nsm09.casimages.com/img/2020/02/26//20022605314023469216661743.jpg)
2mm bigger:
(https://nsm09.casimages.com/img/2020/02/26//20022605314223469216661747.jpg)
looks better:
(https://nsm09.casimages.com/img/2020/02/26//20022605314123469216661746.jpg)
the other side:
(https://nsm09.casimages.com/img/2020/02/26//20022605314223469216661748.jpg)
Last pic to show in a first paint that the color is indeed blue:
(https://nsm09.casimages.com/img/2020/02/26//20022605314123469216661744.jpg)
We can go on...
Xan
-
Here the cockpit zone ended:
(https://nsm09.casimages.com/img/2020/02/26//20022605500723469216662760.jpg)
(https://nsm09.casimages.com/img/2020/02/26//20022605500323469216662759.jpg)
(https://nsm09.casimages.com/img/2020/02/26//20022605500723469216662761.jpg)
Spandau MG are Gaspatch porduct and they are magnificents
at the left Eduard MG:
(https://nsm09.casimages.com/img/2020/02/26//20022611275623469216661983.jpg)
Xan
-
This is perhaps one of the best 1/48th scale, or maybe any scale, Pfalz DIIIa I have seen! Beautiful!
RAGIII
-
Wundbar ! :)
Terri
-
Thanks Rag and Terry!
I did the underside
(https://nsm09.casimages.com/img/2020/02/27//20022705180823469216665261.jpg)
(https://nsm09.casimages.com/img/2020/02/27//20022705180823469216665262.jpg)
(https://nsm09.casimages.com/img/2020/02/27//20022705180923469216665264.jpg)
0,08mm wire and résin Gaspatch turnbucles
(https://cdn11.bigcommerce.com/s-z0fnvjg/images/stencil/1024x1024/products/195/883/ResinTB_OneEnd__45614.1558623332.jpg?c=2)
(https://nsm09.casimages.com/img/2020/02/27//20022705180823469216665260.jpg)
(https://nsm09.casimages.com/img/2020/02/27//20022705180723469216665258.jpg)
(https://nsm09.casimages.com/img/2020/02/27//20022705180723469216665257.jpg)
(https://nsm09.casimages.com/img/2020/02/27//20022705180723469216665259.jpg)
Xan
-
I did the underside
(https://nsm09.casimages.com/img/2020/02/27//20022705180823469216665261.jpg)
(https://nsm09.casimages.com/img/2020/02/27//20022705180823469216665262.jpg)
(https://nsm09.casimages.com/img/2020/02/27//20022705180923469216665264.jpg)
0,08mm wire and resin Gaspatch turnbuckles
(https://cdn11.bigcommerce.com/s-z0fnvjg/images/stencil/1024x1024/products/195/883/ResinTB_OneEnd__45614.1558623332.jpg?c=2)
(https://nsm09.casimages.com/img/2020/02/27//20022705180823469216665260.jpg)
earth effect d'AK
(https://nsm09.casimages.com/img/2020/02/27//20022705180723469216665258.jpg)
(https://nsm09.casimages.com/img/2020/02/27//20022705180723469216665257.jpg)
(https://nsm09.casimages.com/img/2020/02/27//20022705180723469216665259.jpg)
Xan
-
Nice work on the undercarriage. The tyres are a little on the dark side for my taste, but the bungee chords and rigging look great!
Andreas
-
Outstanding work on the bungees and gear rigging! Again your painting is outstanding!
RAGIII
-
Nice weathering on the undercarriage :)
Terri
-
Thank you guys!
The tyres are a little on the dark side for my taste
Idid them with tyre black mixed with white.
Anyway it is the first time I do a 14/18 plane with black tyres, but all the Pfalz pics I saw show them very dark
(https://i2.wp.com/www.militaer-wissen.de/wp-content/uploads/2018/04/Pfalz-D.III_.jpg)
Xan
-
I did the front side too:
(https://nsm09.casimages.com/img/2020/03/02//20030204174023469216670745.jpg)
(https://nsm09.casimages.com/img/2020/03/02//20030204174023469216670746.jpg)
(https://nsm09.casimages.com/img/2020/03/02//20030208314423469216671152.jpg)
next step, struts...
Xan
-
Weathering is Fantastic! Really First Class Modeling!
RAGIII
-
Thanks Rag.
Important moment, the Pfalz is a biiplane at last!!!
(https://nsm09.casimages.com/img/2020/03/03//20030305022523469216671823.jpg)
(https://nsm09.casimages.com/img/2020/03/03//20030305022523469216671825.jpg)
(https://nsm09.casimages.com/img/2020/03/03//20030305022523469216671824.jpg)
Xan
-
That looks great, Xan. The weathering to tone down both the white and black provides a realistic appearance.
-
Not much left to go now .... ;)
Terri
-
Looks Really Terrific as a biplane! I am looking forward to seeing your Pfalz fully rigged!
RAGIII
-
Hi Rag! it is now...
Not easy to take this black plane's pics...
but here it is:
(https://nsm09.casimages.com/img/2020/03/09//20030908502123469216680039.jpg)
(https://nsm09.casimages.com/img/2020/03/09//20030908502123469216680040.jpg)
(https://nsm09.casimages.com/img/2020/03/09//20030908502123469216680037.jpg)
(https://nsm09.casimages.com/img/2020/03/09//20030908502023469216680036.jpg)
(https://nsm09.casimages.com/img/2020/03/09//20030908502123469216680038.jpg)
it was a real pleasure to mount this model, hope you like it!
Xan
-
Your build was a joy to behold! Looks outstanding all rigged and ready to roll !
RAGIII
-
What an absolute gem, love the perfectly executed colour scheme. The leather cockpit padding shows great attention to detail. I love looking at this!
-
Beautiful build Xan :)
Terri
-
I appreciate your presentation as much as the build. Thanks.
Gene K
-
Outstanding!
-
Thanks to all of you!