forum.ww1aircraftmodels.com

WW1 Aircraft Modeling => What's New => Topic started by: Ronkootje on November 06, 2019, 01:45:36 AM

Title: Printing SLA and casting Service.
Post by: Ronkootje on November 06, 2019, 01:45:36 AM: Hi all,

Just wanted to let you know in this tread I finally have and SLA printer for myself to use in the making of new kits. The printer has a print capacity of layer height of 0.025 mm so the prints that come out are very detailed and can be used on future kits I am planning.
The print volume of the printer is 12 by 6.5 by 15 cm.

I am offering printing service to any one who needs a 1 off part for a model or more parts to be printed, and if needed I can make copy's in resin of that part.

Atm I am making a bust of Predator 10 cm high made some adjustments so I can cast copy's.
(https://i.postimg.cc/dkJbf7Bp/20191105-081354.jpg) (https://postimg.cc/dkJbf7Bp)

If you are interested pop me an email at [email protected] and we can discus pricing and shipping.

Here is some wings I did for Brad Cancain cast in resin.
(https://i.postimg.cc/1fSmQtzm/20191021-172528.jpg) (https://postimg.cc/1fSmQtzm)

Kind regards Ron
Title: Re: Printing SLA and casting Service.
Post by: Mike Norris on November 06, 2019, 02:14:26 AM: Hi Ron,
This is great news and I'm sure it will be of great benefit to everyone.
I recently build a Sopwith 'Swallow' using a few parts from a resin conversion set.
To be honest the resin parts were pretty dire and needed a lot work to make them presentable.
I for one will doubtless use your services in the future.

Will you be creating models that are not currently available - create unique parts without a part to copy?

Mike
Title: Re: Printing SLA and casting Service.
Post by: Ronkootje on November 06, 2019, 02:38:45 AM: Yes for my future projects we have planned I will draw the parts in 3d myself and my m8. For the service I am offering you will need to send me a STL 3d file to print. If I would have to draw it up would cost way to much money to make the part and time.

Ron
Title: Re: Printing SLA and casting Service.
Post by: Mike Norris on November 06, 2019, 03:21:32 AM: Hi Ron,
That's good,

Thanks,

Mike
Title: Re: Printing SLA and casting Service.
Post by: seiran01 on November 07, 2019, 05:07:15 AM: Cool to see you've added this to your arsenal, Ron! 25 micron layer thickness... What did you buy? Sounds like a Form 2 / Form 3, maybe a Wanhao.
Title: Re: Printing SLA and casting Service.
Post by: the great waldo on November 07, 2019, 07:25:00 AM: Hi Ron
Where are your photos ?

Cheers
Andrew
Title: Re: Printing SLA and casting Service.
Post by: Ronkootje on November 07, 2019, 04:10:25 PM: I can see two pictures, you don't see them?

Ron
Title: Re: Printing SLA and casting Service.
Post by: Jamo on November 07, 2019, 04:17:29 PM: No pictures for me either
Title: Re: Printing SLA and casting Service.
Post by: Dave W on November 07, 2019, 04:55:55 PM: Ron

I don't know which picture hosting service you use but I don't see any photos either.

I use PostImage for posting pix and it works well.

regads

Dave Wilson
Gold Coast
Australia
Title: Re: Printing SLA and casting Service.
Post by: Ronkootje on November 07, 2019, 11:54:10 PM: Quote from: Dave W on November 07, 2019, 04:55:55 PM
Ron

I don't know which picture hosting service you use but I don't see any photos either.

I use PostImage for posting pix and it works well.

regads

Dave Wilson
Gold Coast

Thanks registered also hope this works now.

Ron
Australia
Title: Re: Printing SLA and casting Service.
Post by: bobs_buckles on November 08, 2019, 12:14:16 AM: Yes,
Pictures working now.
Interesting...

vB :)
Title: Re: Printing SLA and casting Service.
Post by: Brad Cancian on November 24, 2019, 07:59:38 AM: I can certainly attest that Ron's casting work is high quality. Here's some more pics of the wings he did for me:

(https://i23.photobucket.com/albums/b387/bradcancian/1-48%20BE-12a/BE12a14_zpsjrlq1anf.jpg)
(https://i23.photobucket.com/albums/b387/bradcancian/1-48%20BE-12a/BE12a16_zpsmcqujxso.jpg)
(https://i23.photobucket.com/albums/b387/bradcancian/1-48%20BE-12a/BE12a15_zpsaakzdbrz.jpg)

Thanks again Ron!

Cheers,

BC
Title: Re: Printing SLA and casting Service.
Post by: Dave Brewer on November 24, 2019, 08:36:06 AM: Nice to see you back Brad.Those castings look terrific,as you would expect from Ron;looking forward to seeing you use them.
Cheers,
Dave.