-
Hello friends,
Today I start my construction report in a different way. I hope you agree.
8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8)
(http://www.h-j-bellenbaum.de/zs/zsb1e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb2e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb3e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb4e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb5e.jpg)
cheers
Jürgen
-
I LOVE YOUR STYLE! Looking forward to the build ;)
RAGIII
-
COOL !
-
Too funny (and as Terri stated - Cool). Looking forward to seeing this giant (I saw one built up before and was very impressive).
-
I have built a fairly large model in this scale (Dornier Rs II flying boat) but I know that that would be dwarfed by the Staaken, so I am going to follow with great interest.
PS: C. Dornier was working for Count Zeppelin when he designed the flying boat, so our models also have a name in common as well as size!
Stephen.
-
(http://www.h-j-bellenbaum.de/zs/zsb6e.jpg)
Dear participants of the construction report of the Zeppelin-Staaken,
As we have heard from several sites, there are comments on the manufacturer's Lozenge pattern. The main point of criticism is that the pattern can not be processed without offset due to its non-linear division on three sheets (especially since all sheets are identical) when the supplied stencils are used. Our solution proposal looks like this. Copy the templates and patterns on one Din A3 sheet (color or SW, possibly in a copy shop or similar, if no Din A3 printer / copier is available)
Now cut out the stencils and glue them onto the patterned lozenge pattern as shown in the following pictures.
(http://www.h-j-bellenbaum.de/zs/zsb7.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb8.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb9.jpg)
If necessary, this newly created stencil can additionally be copied again. Now the decals can be cut halfway offset. This is especially recommended for the upper wings and heights / rudder. Due to the shape of the hull, unfortunately, it will not be 100% possible. Since the upper two-part wing is longer than the single Decal sheet, two sheets must be placed side by side so that the right sheet is rotated 180 degrees. The cut edge is then not quite as noticeable. The lower wings are not critical as they are separated by the hull.
Yours sincerely
Construction management Dallgow-Döberitz
-
excellent work by the factory on the layout for the lozenge. Looking forward to the next update!
RAGIII
-
(http://www.h-j-bellenbaum.de/zs/zsb10e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb11e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb12e.jpg)
-
Nice to see your progress! excellent work adding the fuel lines!!
RAGIII
-
I do like your unique presentation! The fuel tank details are very interesting - nice additions.
Stephen.
-
(http://www.h-j-bellenbaum.de/zs/zsb13e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb14e.jpg)
-
The ladders and seats look great!
RAGIII
-
(http://www.h-j-bellenbaum.de/zs/zsb15e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb16.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb17e.jpg)
-
(http://www.h-j-bellenbaum.de/zs/zsb18e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb19.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb20.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb21e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb22ae.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb22e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb23.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb24.jpg)
-
A brief information of the aircraft shipyard Dallgow-Döberitz!
On Friday we received a letter from Roden. Of course, we do not want to withhold the content from the participants in this construction report. (Hauptmann von Bombe was of course already taught)
(http://www.h-j-bellenbaum.de/zs/zsbroe.jpg)
We think we can live with that.
Kind regards
Construction management Aircraft shipyard Dallgow-Döberitz
-
This is the cutest build log ever ;D
Great building so far, even better considering the small scale. Following with interest.
Ciao
Giuseppe
-
Impressive work on the bomb load and finishing the interior!
RAGIII
-
The size of this aircraft is apparent from the figure: it is huge even in the True Scale. The extra details that you are adding are very impressive indeed. Will the fuel guages be visible on the completed model?
Stephen.
-
Dear Mr. Stephen,
As it looks, you can see some fuel gauge through the new roof.
The construction management would like to thank all guests for their interest in this project
With best regards
Chowhound
responsible site manager - Dallgow-Döberitz
-
(http://www.h-j-bellenbaum.de/zs/zsb25e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb26.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb27e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb28.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb29.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb30.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb31e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb32.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb33e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb34.jpg)
-
Super lozenge and painting. First class modelling.
Stephen.
-
Outstanding! The only shame is all of that interior detail that is now lost :o
RAGIII
-
Absolutely gorgeous. Nice to see some lozenge going on. My congratulations to the project manager and his team.
Ian
-
(http://www.h-j-bellenbaum.de/zs/zsb35e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb36.jpg)
-
She is a good size and coming right long . Well done so far . Are these the kit decals ?
Terri
-
Hi Terri,
thanks! Yes, these are the decals from Roden.
Juergen
-
(http://www.h-j-bellenbaum.de/zs/zsb37e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb38.jpg)
-
Great stuff and I love the added fun factor.
Robin :)
-
Great stuff and I love the added fun factor.
Me too, but the mechanic needs his mouth washed out with soap.
Gene K
-
Outstanding work on the Lozenge. Getting Roden decals to work is a Major accomplishment!! The Engine nacelles are looking terrific!
RAGIII
-
The construction management informs.
Since the coolers above the nacelle are not exactly detailed, they were supplemented by etched grid parts.
(http://www.h-j-bellenbaum.de/zs/zsb40n.jpg)
----------------------------------------------------------------------------------------------------------------------------------------
(http://www.h-j-bellenbaum.de/zs/zsb39e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb41.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb42.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb43e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb44.jpg)
-
The engine nacelle and pipework look very good. It is difficult to believe that this is in God's Own Scale - amazing work.
Stephen.
-
Your Team is doing exceptional work!
RAGIII
-
Cool work, Jürgen. The style of presentation is also great fun to read.
Bye,
Manni
-
(http://www.h-j-bellenbaum.de/zs/zsbe.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb45.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb46e.jpg)
The Hauptmann of course means the above picture!
(http://www.h-j-bellenbaum.de/zs/zsb47e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb48.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb49.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb50.jpg)
-
Looking great! Getting the Roden Lozenge to work is an accomplishment in and of itself!
RAGIII
-
(http://www.h-j-bellenbaum.de/zs/zsb51e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb52e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb53e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb54e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb55e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb56e.jpg)
-
My compliments to the Hauptman and to Himmelstoss. Very good work!
-
I am amazed that anyone can get those struts all lined up! Well Done!
RAGIII
-
Like Rick I am in awe of Himmelstoss' ability to line up correctly all of those struts. This is a truly impressive achievement - especially the addition of the upper wing gun positions.
Stephen.
-
Don't forget to give Himmelstoss a medal...he deserves it. :)
Robin
-
For a two man crew , they do good work ! Are they for hire ? :)
Terri
-
(http://www.h-j-bellenbaum.de/zs/zsbc1e)
(http://www.h-j-bellenbaum.de/zs/zsb57e)
(http://www.h-j-bellenbaum.de/zs/zsb58)
(http://www.h-j-bellenbaum.de/zs/zsb59e)
(http://www.h-j-bellenbaum.de/zs/zsb60)
-
Make sure the Hauptmann does not get tangled in the rigging!
-
wow! nice!
Robin :)
-
The rigging looks Outstanding! My compliments to the Hauptmann and team!
RAGIII
-
(http://www.h-j-bellenbaum.de/zs/zsb61e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb62e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb63.jpg)
-
Very impressive!
RAGIII
-
(http://www.h-j-bellenbaum.de/zs/zsb65e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb64e.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb66.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb67.jpg)
(http://www.h-j-bellenbaum.de/zs/zsb68e.jpg)
-
Almost sad to see this build come to an end.
I wish the Hauptmann and his crew a glorious career ...after the Christmas truce of course. :)
Robin
-
Wow! What a beast, and what a wild a/c, at least I've always thought so.
Prost! to the construction, erection, and rigging crew!
WD
-
Terrific results and a very fun way of presenting your processes!
RAGIII
-
Awesome model, and presented in a very entertaining way. Very enjoyable - thanks for taking the time to put it all together :-)
Cheers,
Gary
-
(http://www.h-j-bellenbaum.de/zs/end.jpg)
-
I thought rigging a MF 7 Longhorn was a bit of a challenge but looking at the rigging of those wings I may change my mind!
That is a superb model in every way and a really unique build report. Many congratulations to your team!
Stephen.