forum.ww1aircraftmodels.com

WW1 Aircraft Modeling => Under Construction => Topic started by: coyotemagic on September 18, 2018, 11:33:32 AM

Title: Copper State Models Pfalz Dr.I, kit #1006
Post by: coyotemagic on September 18, 2018, 11:33:32 AM

Another CSM oldie which may be re-issued in limited run plastic.  Not sure when, but probably 2019.
I bought this kit from Eric back in 2010 (original release was 1996).  It's old and it shows.  The fuselage was almost completely solid with a very small open cockpit area.  I took a Dremel to it almost immediately, then set it aside until just a couple weeks ago.  Here are some in progress photos.  I'm really moving along on this little thing and will probably have her done in about a week.
(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-01%2009.26.03_zpsgcv8no3v.jpg)

(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-01%2009.27.17_zpsrcz0hgrl.jpg)

This cowling is a mess and is going to require some serious attention.
(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-08%2011.48.11_zpspl1huek9.jpg)

(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-08%2011.48.25_zpsjdaicgxq.jpg)

The only interior parts that came with the kit were an undersized pe rudder bar, an oversized pe half disc with a single hole in it to represent an instrument panel and a very flat pe U shaped piece for the control column grip.  That wouldn't do, so I cobbled something up with Evergreen stock, and scraps from the spares box.
(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-09%2016.34.50_zpsvfsoz049.jpg)

(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-09%2017.00.10_zpsswgt3ahd.jpg)

The floor, rudder bar and the control column came straight out of an Eduard Pfalz D.IIIa kit.  The seat came from the spares box, seat belts are Eduard pe, ammo can modified from spares box, top of ip is Eduard pe, bottom half is scratched, compass is scratched with Eduard face.
(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-10%2020.42.59_zps2uj70onv.jpg)

(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-10%2020.43.28_zpsyhogkabr.jpg)

(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-10%2020.44.00_zps5cbrxvmq.jpg)

(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-10%2020.44.46_zpsns0abjne.jpg)

All closed up.  Simple.
(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-13%2010.10.54_zpswyoxmdbc.jpg)

Pre-shading with pastels over light grey base coat.
(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-14%2011.28.19_zpsgivutmkg.jpg)

Drooling Bulldog Silbergrau.  Probably the best paint I've ever used.  Sprayed it last night and I immediately ordered the entire line. 
Decals are halfway finished.
(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-17%2014.01.09_zpszc6qf0kt.jpg)

That's all for now.  More in a couple days.
Cheers,
Bud

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: lcarroll on September 18, 2018, 11:42:54 AM

     "Drooling Bulldog Silbergrau.  Probably the best paint I've ever used."

    Good to hear Bud, I was gifted a bottle of the stuff this weekend and I'm looking forward to trying it.
Where did you order the set from, direct or is there a US Distributer? It's looking awesome already, great subject!
Cheers,
Lance

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: Bughunter on September 19, 2018, 03:44:34 AM

Quote from: coyotemagic on September 18, 2018, 11:33:32 AM

Another CSM oldie which may be re-issued in limited run plastic.

Bud, that is the message of the day for me!
After the Dornier D.I then also a Pfalz Dr.I.  Christmas time!
I don't want to buy new kits, but those I have to! 8)

That looks nice, what you are doing with this resin kit!

Cheers,
Frank

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: lone modeller on September 19, 2018, 04:53:05 AM

The silver finish is one of the best I have seen in a long time. The interior details are first class too - in all another winner from the master's table.

Stephen.

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: dr 1 ace on September 19, 2018, 05:35:02 AM

Good pic, silver really looking good.

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: Alexis on September 20, 2018, 11:20:31 AM

Wow arn't you the fire cracker on this build , looking really good so far Bud , I should pull my for the queen of the shelf and get her done






Terri

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: mgunns on September 20, 2018, 11:18:18 PM

Looking at those chunks of resin fuselage halves and challenges ahead, you are certainly working some "Coyote Magic" on this kit, making good progress on it and turning it into a winner.  I agree, the silver looks great as does the work you have done on it thus far.  Keep those photo's coming.

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: mgunns on September 20, 2018, 11:20:27 PM

Quote from: lcarroll on September 18, 2018, 11:42:54 AM

     "Drooling Bulldog Silbergrau.  Probably the best paint I've ever used."

    Good to hear Bud, I was gifted a bottle of the stuff this weekend and I'm looking forward to trying it.
Where did you order the set from, direct or is there a US Distributer? It's looking awesome already, great subject!
Cheers,
Lance

Yes, Bud:  Where did you get it?  I would like to try it as well.

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: coyotemagic on September 23, 2018, 12:48:55 PM

Thank you so much for the kind comments, my friends!
Lance and Mark, I ordered the DB paints directly from the source. 
https://www.droolingbulldog.com/

Undercarriage, engine and cowling installed. 
(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-22%2015.18.39_zpsr6tostmc.jpg)

(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-22%2017.21.09_zpss2qupmj5.jpg)

Guns next, then the wings.
Cheers,
Bud

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: Juan on September 23, 2018, 08:30:27 PM

Amazing build Bud.  She looks larger than 1/48.

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: coyotemagic on September 24, 2018, 01:01:51 PM

Thanks, Juan! This really a tiny plane.  Wingspan is 7" and nose to rudder only 4 1/2".
Cheers,
Bud

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: Manni on September 24, 2018, 04:25:34 PM

Bud, this plane looks really great. An other proof of your skills.
Bye,
Manni

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: andonio64 on September 24, 2018, 10:07:18 PM

Bud, I join the line of those who appreciate this masterclass model and the silvery livery you gave to it!
Wow!

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: Bughunter on September 25, 2018, 02:03:50 AM

I like it too, looks really like the original!
(https://upload.wikimedia.org/wikipedia/commons/thumb/a/a9/PfalzDr.jpg/800px-PfalzDr.jpg)
Source: wikimedia.org

Cheers,
Frank

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: GazzaS on September 29, 2018, 06:16:29 PM

Wow, Bud this is a fantastic little build!

Great work!

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: coyotemagic on September 30, 2018, 11:40:22 AM

Thanks, Manni, Andonio, Frank and Gaz!  Much appreciated.
Thanks for posting that photo, Frank.  That's how she looked right off the assembly line.  I will try to show mine as she looked when test flown by Richthofen with a new prop and replacement struts.
After a great deal of filing, sanding, bending, pushing, prodding, twisting and cursing, she is now a triplane.
(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-09-29%2017.54.54_zpscqyivhgg.jpg)

Now, the rigging begins.  Shouldn't take too long. ;)
Cheers,
Bud

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: Bughunter on October 01, 2018, 06:15:56 AM

Wow, already a Triplane :o
That build was really fast! Good luck with the rigging, the gear is also done already.
If someone has a collection of triplanes, this type needs to be part of that.

Cheers,
Frank

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: lone modeller on October 02, 2018, 02:48:22 AM

I miss a couple of days and this is nearly finished.... That was quick Bud. Super finish on the paintwork - this is going to be another of your stunners I can tell.

Stephen.

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: dr 1 ace on October 02, 2018, 06:17:38 AM

Looking Sharp, await final pics !!

Ed

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: RAGIII on October 07, 2018, 06:11:12 AM

Watched this one come together on FB. Already commented on the final photos but will say it again, Stunning work as always Amigo!
RAGIII

Title: Re: Copper State Models Pfalz Dr.I, kit #1006
Post by: coyotemagic on October 07, 2018, 07:30:28 AM

Thanks so much, guys!  She's done and in the cabinet.  Final photos in the completed models section.
(http://i1022.photobucket.com/albums/af342/coyotemagic_photos/CSM%20Pfalz%20DrI/2018-10-05%2011.04.09_zpsdf5zgd9q.jpg)
Thanks for following along, my friends!
Cheers,
Bud