forum.ww1aircraftmodels.com
WW1 Aircraft Modeling => Under Construction => Topic started by: KrzysiekK on April 06, 2018, 04:17:30 PM
-
Good Day,
I will try to use late Alb from Roden to represent Stefan Bastyr's D.VII being involved in Polish-Bolshevik war of 1920.
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_2.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_1.JPG)
regards
K
-
I am looking forward to your build K. Always nice to see more unusual schemes on the DVII.
RAGIII
-
It will be great to follow along with this build. We’ve got to keep a strong 1/48th scale presence here.
Kevin
-
Looking forward to another one of your beauties K. :D
-
Hi,
Up to now the engine was upgrated and minor work on cocpit assembly done
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_3.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_4.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_5.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_7.JPG)
regards
k
-
Nice start
Steve
-
Terrific start! Great detailing, especially in 1/48th!
RAGIII
-
Krzy,
Outstanding first progress my old friend. Me thinks another Masterpiece is underway .
Highest Regards,
Gregory Jouette
-
Thanks!
Little progress so far..
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_6.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_8.JPG)
regards
K
-
A fine start, K! Looking forward to the progress.
-
Nice stitching on the rear bulkhead K! Looking forward to the next update
RAGIII
-
Nice start, good work on the engine.
Giuseppe
-
Wow! Fantastic start on those details. What was the diameter of the cooper wire you used?
Gaz
-
Stitching and seat (cushion) look great! I'm watching with interest as I have the same decals in 1/72. Bastyr's D.VII was the one with the red-white zig-zag on the fuselage if I remember correctly?
-
What was the diameter of the cooper wire you used?
Gaz
It was fishing line, which better fits for this upgrade. AFAIR 0,08 ....
.
Jeroen: correct. Bastyr's zig-zag on the fuselage
thanks
K
-
Superb work, as always, K!
Cheers,
Bud
-
Thanks!
the pilot zone has been almost completed
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_9.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_10.JPG)
regards
K
-
Hi,
The wings were primed and sanded for dry pigment application, similar to have been done in my D.VI last year. At this time I would like to imitate the wings structure more firmly before Aviattic decals being applied
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_12.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_13.JPG)
regards
K
-
Very nice work.. Looking forward to the next step
Steve
-
Looking terrific! The preshading should work out well!
RAGIII
-
Thanks!
In the meantime I have done engine frame, which IMHO is quite hard task to accomplish...very fragile, must be very cautious once cutting out from the sprue
I have decided to have it opened so must have added PE part
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_23.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_22.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_27.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_26.JPG)
regards
K
-
Very nice! A little jewel in the making!
Borsos
-
Nicely done engine , frame, and panel. Looking awesome
RAGIII
-
Very nice work on the engine ;)
-
Great work! Love the PE panels and louvres.
-
Hi,
Getting back to the wings and Aviattic decals aplication. Looks good on that Roden wings ;D
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_14.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_16.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_15.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_17.JPG)
regards
K
-
Very nice!
-
Terrific application of the Aviattic decals and the pre shading has worked well!
RAGIII
-
Great!
-
Thanks!
The next step, which was rather tough one was dealing with attaching the engine bay to the fuselage..I have done several dry fittings before mission was finally accomplished.
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_30.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_36.JPG)
regards
K
-
Good work, the preshadeing is just great.
Bye,
Manni
-
You have done an outstanding job getting the nose and fuselage panels lined up! Looks awesome with all in place.
RAGIII
-
Very nice work. The wings look great under the Aviattic combined with your paint. The staining on the fuselage is excellent too!!
Steve
-
Great!
-
Thanks!
All decals are applied so have been continuing the weathering process..
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_40.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_41.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/F.DVII_PL/FDVIIPL_35.JPG)
regards
K
-
That looks great! Dirty, too.
Gaz
-
The colors and markings are gorgeous! Love the weathering.
RAGIII
-
Outstanding K, looks larger than 1/48 with your treatment.
-
Wow! What a beauty, K!
Cheers,
Bud
-
A nice well used machine!
Steve