forum.ww1aircraftmodels.com

WW1 Aircraft Modeling => Under Construction => Topic started by: KrzysiekK on February 20, 2018, 08:44:35 PM

Title: HANRIOT HD.1 – double strike in 1:48
Post by: KrzysiekK on February 20, 2018, 08:44:35 PM: Good Day,
As Antonio pointed out few dozen threads ago that this French plane constitutes the neglected topic so must be considered as top urgent action to be done!
I will use those 2 kits and perform Italian one for sure. Second will be Belgian.
Inbox
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_1.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_2.JPG)

For couple of days I am trying to adjust&alter the kit proposed by Eduard into sth more like Hanriot’s replica. I have done crating just to be properly visible once assembled, did the intake pipes, drilled cowling, hybrid Eduard’s & Small Stuff engine from spares etc.
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_3.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_4.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_5.JPG)
regards
K
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: RAGIII on February 21, 2018, 12:26:36 AM: Very nice start! I am looking forward to your Double build!
RAGIII
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: coyotemagic on February 21, 2018, 12:47:51 AM: Quote from: RAGIII on February 21, 2018, 12:26:36 AM
Very nice start! I am looking forward to your Double build!
RAGIII
Same here, K! I've got these two kits in my stash, so looking forward to following and getting some guidance along the way.
Cheers,
Bud
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: dr 1 ace on February 21, 2018, 06:01:32 AM: wow another dual build, look forward to seeing them !

Ed
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: Juan on February 21, 2018, 06:22:58 AM: Looking forward to seeing your treatment on these two birds.
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: Alexis on February 21, 2018, 10:53:01 AM: I can echo what the others have said , looking forward too these builds

Terri
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: andonio64 on February 22, 2018, 09:41:36 PM: K knows how much I like this plane, so I will follow this WIP closely!
I hope I will be able to move on with my triple 1/144 build... soon!
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: buzby on February 23, 2018, 01:27:10 AM: I will follow the progress with great interest, I remember that HD.1 with was my first or second model from WW1 period I've built years ago.
8)
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: Bughunter on February 23, 2018, 06:41:41 AM: Watching your progress! One day I will touch this kit too.

Cheers,
Frank
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: Iancshippee on February 23, 2018, 11:23:59 AM: I enjoyed building my Eduard HD.1 the most of any Eduard kit i’ve built yet! Looking forward to following this one!
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: KrzysiekK on February 23, 2018, 05:47:06 PM: Thanks for support ;D
As for me there is not other way then just to present next ups :D
I have chosen the easiest way instead of creating crate from scratch. The sides and bottom part are done for final assembly
Ps. The "turnbuckles" are not positioned yet ;)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_6.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_7.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_8.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_9.JPG)
regards
K
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: andonio64 on February 23, 2018, 06:34:18 PM: Great work k!
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: pepperman42 on February 23, 2018, 11:28:23 PM: Nice work!!

Steve
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: RAGIII on February 24, 2018, 09:12:01 PM: Your interior colors and bracing wires are gorgeous K.
RAIII
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: KrzysiekK on February 27, 2018, 05:25:47 PM: Thanks a lot for the feedback!
The instrument panel is done and interior almost finished
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_12.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_15.JPG)
One can hardly see all the work being done so far..
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_16.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_17.JPG)
regards
K
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: pepperman42 on February 28, 2018, 12:53:04 AM: We know its there now and you can see enough to see how well it is done!!

Steve
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: RAGIII on February 28, 2018, 12:53:51 AM: Excellent IP K! The interior is looking awesome all in place!
RAGIII
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: xmald on February 28, 2018, 07:17:05 AM: Great job! I really like your work Krzysiek. Nice scratch building too.
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: KrzysiekK on March 05, 2018, 06:30:29 PM: ..final look just before the halves closure
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_19.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_20.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_21.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_23.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_25.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_26.JPG)
regards
K
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: RAGIII on March 06, 2018, 01:04:07 AM: Both interiors are looking great! I look forward to the next update!
RAGIII
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: coyotemagic on March 06, 2018, 05:41:22 AM: Quote from: RAGIII on March 06, 2018, 01:04:07 AM
Both interiors are looking great! I look forward to the next update!
RAGIII
I couldn't agree more, K!
Cheers,
Bud
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: Berman on March 06, 2018, 06:39:40 AM: It would be great if Pheon decals ever issues their Italian Hanriot sheets. Maybe a word of encouragement to Rowan might help. :)
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: gbrivio on March 06, 2018, 06:45:55 AM: Great start with the Hanriots, this is a must for me to follow.
And I would like too the italian edition of Pheon Decals if it becomes available.
Ciao
Giuseppe
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: Manni on March 06, 2018, 04:20:12 PM: Top - twin build. The interior looks very good!
Bye,
Manni
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: KrzysiekK on March 06, 2018, 04:32:19 PM: Thanks a lot!
I have been following the status of Italian marking from Pheon, but after my last reminder approx 6 months ago I got the notice that it was not scheduled in the nearest future. So gave up :(
regards
K
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: andonio64 on March 06, 2018, 07:20:33 PM: Quote from: KrzysiekK on March 06, 2018, 04:32:19 PM
Thanks a lot!
I have been following the status of Italian marking from Pheon, but after my last reminder approx 6 months ago I got the notice that it was not scheduled in the nearest future. So gave up :(
regards
K

I had a similar experience, I decided not to wait any longer and made my first 1/48 trio without Pheon decals.
I think I will not make any more Hanriot (oops, no, I still have the floatplane in my stash)... too many other interesting planes around waiting to be built!

By the way I love your work so far K!

AnDonio
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: fredjocko on March 08, 2018, 02:11:59 AM: I agree the Hanriot is under represented and it should be made. Great job on yours.
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: Monty on March 08, 2018, 03:29:31 AM: Lovely work! A delight to view! I will definitely follow this thread! Regards, Marc
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: KrzysiekK on March 09, 2018, 05:12:29 PM: Appreciated for warm welcome ;D

At the pilots back, where fuel intake was located I have added the alu scarf clearly visible on pics available.
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_30.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_29.JPG)
Tail will be modified as provided by kit was not satisfactory
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_31.JPG)

regards
K
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: RAGIII on March 09, 2018, 10:58:13 PM: Excellent additions K.
RGIII
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: dr 1 ace on March 11, 2018, 05:12:36 AM: Quote from: RAGIII on March 09, 2018, 10:58:13 PM
Excellent additions K.
RGIII

Ditto !!!!

Ed
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: GazzaS on March 12, 2018, 04:26:23 PM: Amazing cockpit detail! I am really impressed by you guys that take the time to rig the inside.

Gaz
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: KrzysiekK on March 12, 2018, 05:00:16 PM: Thanks ;D
I forgot to mention that ref markings I would like to perform Italian tenente Bogliolo “shooting star” from 81 sq and Belgian no. 24.
Got some pics ref to wings part being prepared
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_28.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_32.JPG)

regards
K
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: GazzaS on March 12, 2018, 06:35:11 PM: Nice colors. I like the rib tapes, too.,

Gaz
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: PrzemoL on March 13, 2018, 09:33:06 PM: Very fine work on that pair, Krzysiek. I like it very much, I like the Hanriot itself. I will be watching with great interest.
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: RAGIII on March 14, 2018, 12:02:20 AM: Your color selection is excellent and your painting is terrific!
RAGIII
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: KrzysiekK on March 19, 2018, 05:17:27 PM: Thanks!
For time being I have prepared the shape for the base and did imitations of stitching. According to Windsock it starts just behind the inspection panel so contrary to what Eduard presented.
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_34.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_35.JPG)
regards
K
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: GazzaS on March 19, 2018, 07:02:05 PM: That stitching looks awesome!

GAz
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: RAGIII on March 19, 2018, 10:43:48 PM: Excellent stitching work and correction to the kit!
RAGIII
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: KrzysiekK on March 23, 2018, 06:17:22 PM: Thanks!

The engine is the hybrid being done from Eduard’s part and Small Stuff leftovers
For the engine assembly I had to do some inner cowling thinning but have not reached the engine running. It barely moves.
According to photos available the Vickers machine gun was relocated to the centerline of the fuselage in both cases i.e Belgian & Italian. The general idea was to improve pilots access to the gun during the flight

(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_36.JPG)
regards
K
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: RAGIII on March 23, 2018, 06:26:05 PM: All looks excellent in place! Nicely done.
RAGIII
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: GazzaS on March 23, 2018, 08:16:25 PM: Very nice metal effects! I'm gonna hafta learn how to do that one day,

Gaz
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: Iancshippee on March 25, 2018, 09:21:31 AM: Coming along great! If you're interested, here's what I did with my Hanriot to get the engine the way I wanted it. When I did my HD.1 last year, I did some minor tweaking of the kit parts for the engine, and it ended up looking the part and still spun freely. I assembled the engine the way the instructions asked, with the exception of the intake pipes. the way the instructions showed assembly, the pipes end up on the wrong side of the cylinders, so I put that part on "backwards" and bent the pipes forward to meet the cylinders. I still had clearance, and the pipes looked the way they would appear on a real Le Rhone 9J. only thing I wish I had done was rounded the PE part for the timing cover, but otherwise I'm happy with the result! here's how it looks.

(https://farm5.staticflickr.com/4205/35660156326_1f25d07ea1_b.jpg)
IMG_0003 (https://flic.kr/p/WkaC6u) by Ian Shippee (https://www.flickr.com/photos/150727002@N07/), on Flickr

(https://farm5.staticflickr.com/4511/23782365518_4bb81af6bd_b.jpg)
IMG_0209 (https://flic.kr/p/CeyQGN) by Ian Shippee (https://www.flickr.com/photos/150727002@N07/), on Flickr

Keep up the great work on this pair, I love Hanriots!
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: jeroen_R90S on March 25, 2018, 06:37:09 PM: Looking good, K! As good as these look, somehow that stitching really stands out :)
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: KrzysiekK on March 26, 2018, 08:12:11 PM: Thanks Guys for the support!
I have tried to enhence the outcome that is why started to change those things..and finally have not reached my initial intention.
Current status: 50% of prop running!
Let's move forward and focus on tail now. It is really close to that how it should look like

(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_37.JPG)
(http://rebe83.waw.pl/pub/krzysiek/warsztat/HD.1/HD1_41.JPG)

Seem there will be ONLY rigging left, so almost done!!

regards
K
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: andonio64 on March 26, 2018, 08:23:45 PM: Wow K the two tails look better than the real ones!

Antonio
Title: Re: HANRIOT HD.1 – double strike in 1:48
Post by: RAGIII on March 26, 2018, 11:18:04 PM: You have done a Fantastic job on the tail corrections! They look perfect!
RAGIII