forum.ww1aircraftmodels.com

WW1 Aircraft Modeling => Completed models => Topic started by: RAGIII on August 05, 2016, 07:54:45 AM

Title: WNW Salmson 2A2 with Pheon Decals
Post by: RAGIII on August 05, 2016, 07:54:45 AM
Well I have finally finished this one more or less. As I plan to eventually put this one in a Diorama I kept the weathering to a minimum pending my decision on the overll scene. I was asked to share my thoughts on building this kit so I will oblige.
 As all WNW kits this one is extremely well engineered. Tolerances are tight but not as much as say the Albatros or Pfalz. The detail is awesome as in all WNW kits. I found myself constantly moving back and forth on the directions as it is easy to miss something and or find more/better details a couple of pagers further than I was in construction. I used WNW mixtures for all of the colors and found them to be very satisfactory. I used the "Later" rigging pattern as I felt that was correct, and it eliminated  the need to represent the wood filled and wrapped double lines. WNW does show this rigging variant but one must look hard . I found no major issues with the build that were not SELF created! About those I guess it was because this aircraft is larger than I am used to handling that I found myself constantly running the wing tips into things. In particular my Roden SPAD VII suffered a horrible fate! Another thing was that where I found myself picking the kit up seemed to put my wrist in the perfect position to knock off the tail braces  and rigging! I lost one of the braces at some point before I totally knocked off the tail planes. I replaced it with an airfoil shaped strut of the appropriate size and went on. Later I lost the other! So I made another copy. While weathering I knocked off one of the copies and couldn't find it on the carpet. Lifted up a box and found one of the originals.

So overall my experience and take on this kit is that it is one of WNW best! If you like the Salmson or are inclined to build a USAS bird GET ONE!
RAGIII

(http://i1185.photobucket.com/albums/z349/rickgeisler/WNW%20Salmson%20and%20Aviattic%20Figures/DSCF4658_zpsfnqk6w4v.jpg)


(http://i1185.photobucket.com/albums/z349/rickgeisler/WNW%20Salmson%20and%20Aviattic%20Figures/DSCF4657_zpsqx9b7mgw.jpg)

(http://i1185.photobucket.com/albums/z349/rickgeisler/WNW%20Salmson%20and%20Aviattic%20Figures/DSCF4654_zpsgokb8rcr.jpg)

(http://i1185.photobucket.com/albums/z349/rickgeisler/WNW%20Salmson%20and%20Aviattic%20Figures/DSCF4656_zpshp5kpmnv.jpg)

(http://i1185.photobucket.com/albums/z349/rickgeisler/WNW%20Salmson%20and%20Aviattic%20Figures/DSCF4650_zpskjcub3ds.jpg)

(http://i1185.photobucket.com/albums/z349/rickgeisler/WNW%20Salmson%20and%20Aviattic%20Figures/DSCF4653_zpsb3kyvvse.jpg)

(http://i1185.photobucket.com/albums/z349/rickgeisler/WNW%20Salmson%20and%20Aviattic%20Figures/DSCF4641_zps7vxugbgp.jpg)


(http://i1185.photobucket.com/albums/z349/rickgeisler/WNW%20Salmson%20and%20Aviattic%20Figures/DSCF4633_zpsvktpeccp.jpg)

(http://i1185.photobucket.com/albums/z349/rickgeisler/WNW%20Salmson%20and%20Aviattic%20Figures/DSCF4635_zps7xalvmti.jpg)



(http://i1185.photobucket.com/albums/z349/rickgeisler/DSCF4610_zpslo0pzaw2.jpg)


Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: Des on August 05, 2016, 08:49:55 AM
Congratulations Rick and thank you for your build log and now these wonderful photos of your superb model. You have done a remarkable job with the painting on this model, the colours are absolutely brilliant and the rigging is sublime, very well done Rick.

Des.
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: lcarroll on August 05, 2016, 12:33:27 PM
    Great summary Rick, and absolutely beautiful Build! Your paint work is truly outstanding and the rigging exceptional. I spent a little time checking out the various joins (The gear struts stand out) and your work is "clean" beyond perfection......... This is a real winner!
Cheers (and congratulations on an outstanding Build)
Lance
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: GAJouette on August 05, 2016, 12:36:02 PM
 Rick,
Congratulations my old friend. She's an absolute thing of beauty. Fitting tribute to your Master Class skills and craftsmanship. Well Done!
Highest Regards,
Gregory Jouette
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: coyotemagic on August 05, 2016, 01:01:50 PM
She's truly magnificent, Amigo!  I think she's your best yet.  Remarkable craftsmanship all around.
Cheers,
Bud
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: Manni on August 05, 2016, 02:41:59 PM
Rick, you have build an outstanding model. Pantjob and rigging looks perfect. Please show us some pics when you put it in a doirama, but I think you can place it on a nice polished wooden base to avoid distraction of this beauty.
Manni
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: gbrivio on August 05, 2016, 03:45:10 PM
This is a beautiful kit in every detail and it was a pleasure to follow its building. Absolutely a masterpiece.
Well done.
Giuseppe
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: IFF1418 on August 05, 2016, 05:11:18 PM
Hello Rick,

I completely agree with Bud. This is your best yet! This is a build were all elements are truly magnificent. The build itself, wonderful camo painting and colours, the decaling and the rigging. One of the best Salmsons I have ever seen! Many congratulations my friend!

Kind regards
Patrick
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: ondra on August 05, 2016, 07:11:54 PM
As mentioned on FB already, from my point of view your best build so far. Great job, Rick, and congratulations on finishing this beauty!

Cheers

Ondra
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: Ernie on August 05, 2016, 08:41:43 PM
Hello Rick,

I completely agree with Bud. This is your best yet! This is a build were all elements are truly magnificent. The build itself, wonderful camo painting and colours, the decaling and the rigging. One of the best Salmsons I have ever seen! Many congratulations my friend!

Kind regards
Patrick

Rick, I completely agree with our friend Patrick!  Your Salmson is a jewel, my friend!

Cheers,
Ernie :)
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: dtomko on August 05, 2016, 08:57:33 PM
Really beautiful build, Rick!

Drew
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: RAGIII on August 06, 2016, 12:22:10 AM
Thanks very much for all of the comments guys! I really enjoyed building this one. Now a few days and a clean up of the desk before moving on with the figures and the next builds!
RAGIII
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: PrzemoL on August 06, 2016, 05:14:06 AM
Lovely one, Rick. Congratulations.
And I confirm, this is a lovely kit (but then, which WNW one is not?), recommended to anybody deliberating which WNW model to build !
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: RAGIII on August 06, 2016, 05:49:32 AM
Lovely one, Rick. Congratulations.
And I confirm, this is a lovely kit (but then, which WNW one is not?), recommended to anybody deliberating which WNW model to build !

Thanks Przemol!  I had your build bookmarked and referred to it often when building mine!
RAGIII
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: Alexis on August 06, 2016, 09:21:56 AM
Haven't commented very much during your build , but that doesn't mean I wasn't following along . I really enjoyed your build Rick . Your skills have sharpened up wonderfully over the years and this build proves that ! Well done my friend  :)



Terri
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: gedmundson on August 06, 2016, 10:26:49 AM
Yes, as stated above - great finish on a beautiful build Rick. Awesome job, and congrats!
Cheers,
Gary
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: P.P. on August 06, 2016, 08:20:57 PM
It's a great build in every detail. Perfectly done. Regards, Paul.
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: RAGIII on August 06, 2016, 08:23:24 PM
Haven't commented very much during your build , but that doesn't mean I wasn't following along . I really enjoyed your build Rick . Your skills have sharpened up wonderfully over the years and this build proves that ! Well done my friend  :)



Terri

Thanks Terri. Your comments are always appreciated!
RAGIII
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: RAGIII on August 06, 2016, 08:25:20 PM
Yes, as stated above - great finish on a beautiful build Rick. Awesome job, and congrats!
Cheers,
Gary

Thanks Gary. I appreciate you dropping by and commenting!
RAGIII

It's a great build in every detail. Perfectly done. Regards, Paul.

Thanks for the generous comment Paul. Greatly appreciated.
RAGIII
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: Monty on August 07, 2016, 02:12:23 AM
Yes, that is very, very nice, Rick! After going through your build and seeing the end result I will indeed have to get one! Truly, lovely work!
All The Best,
Marc
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: RAGIII on August 07, 2016, 04:43:41 AM
Yes, that is very, very nice, Rick! After going through your build and seeing the end result I will indeed have to get one! Truly, lovely work!
All The Best,
Marc

Thanks Monty, greatly appreciated!
RAGIII
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: oldalbie on August 07, 2016, 08:25:40 AM
A very beautiful job on the Salmson, Rick.  It's great to see such fine work being done on French planes.
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: RAGIII on August 08, 2016, 05:59:16 AM
A very beautiful job on the Salmson, Rick.  It's great to see such fine work being done on French planes.

Thanks for the comment. Greatly appreciated.
RAGIII
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: lone modeller on August 09, 2016, 05:39:48 AM
I too have been following this one and am impressed in every way by the result which is to say the least, spectacular. If it is put into a duo I hope that you will not put in too many distractions - this could easily stand on a mirror base on its own and just be an object for serious viewing and admiration.

Stephen.
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: Adam on August 09, 2016, 09:13:20 PM
Gorgeous model.

Adam.
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: stevehed on August 09, 2016, 10:48:20 PM
Quality build RAG111. Very impressed. I've got this down for a kit bash in 1/72 but all those louvres and rocker covers look extremely daunting.

Regards, Steve
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: RAGIII on August 12, 2016, 11:16:39 AM
I too have been following this one and am impressed in every way by the result which is to say the least, spectacular. If it is put into a duo I hope that you will not put in too many distractions - this could easily stand on a mirror base on its own and just be an object for serious viewing and admiration.

Stephen.

Stephen,
I appreciate your input. Right now my thoughts are leaning to something simple including the Aviattic figures.
RAGIII




Gorgeous model.

Adam.

Thanks Adam. Your comment is appreciated as always!
RAGIII

Quality build RAG111. Very impressed. I've got this down for a kit bash in 1/72 but all those louvres and rocker covers look extremely daunting.

Regards, Steve

Thanks for commenting Steve. I am looking forward to seeing your kitbash!
RAGIII
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: stefanbuss on August 12, 2016, 04:10:24 PM
I really love the photo showing the engine close-up. Very impressive paintjob. Well done.

One comment, though (please don't understand that as a major critic, it's meant as a proposal, as one can always improve somewhere): Your photos would be better with a wee bit of additional light. It's rather hard to appreciate the aircraft's beauty when you can#t see those lovely little details.

KR,
Stefan
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: bobs_buckles on August 12, 2016, 04:34:17 PM
A bird of special magnificence, Rick!
Well done  :) ;)

vB
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: dr 1 ace on August 13, 2016, 05:12:16 AM
So nicely done !!! Which of the next IPMS NATS is the best bet for you to attend ?

Ed
Title: Re: WNW Salmson 2A2 with Pheon Decals
Post by: RAGIII on August 13, 2016, 10:31:27 PM
I really love the photo showing the engine close-up. Very impressive paintjob. Well done.

One comment, though (please don't understand that as a major critic, it's meant as a proposal, as one can always improve somewhere): Your photos would be better with a wee bit of additional light. It's rather hard to appreciate the aircraft's beauty when you can#t see those lovely little details.

KR,
Stefan

Thanks Stefan. My photography continues to be a challenge to say the least. I tried using an additional light on these and they came out better than before but still not quite there. My camera does have settings for exposure time but I still haven't figured out how to use them  :-[ When I try I let in so much light that the picture is pure white with no model in the image .
RAGIII

A lovely build :)

Thanks for commenting Justin!
RAGIII

A bird of special magnificence, Rick!
Well done  :) ;)

vB

Thanks VB for the generous comment!
RAGIII


So nicely done !!! Which of the next IPMS NATS is the best bet for you to attend ?

Ed

Thanks Amigo! Not sure yet which of the IPMS Nats I am  going to shoot for. Time will tell.
RAGIII
RAGIII