forum.ww1aircraftmodels.com

WW1 Aircraft Modeling => WW1 Aircraft Information/Questions => Topic started by: Toldbod on August 24, 2014, 07:16:15 AM

Title: Comparison of the tail plane on Fokker EV and DR.I
Post by: Toldbod on August 24, 2014, 07:16:15 AM: Is there someone who can help me. I have Fokker EV # 8480 1:48 but the tail plane is not properly cast.

(http://www.danskemodelbyggere.dk/forum/gallery/7949_16_08_14_10_48_23_0.JPG)
I have contacted Eduard but they cannot help.

From what I can see the tail plane of Fokker E.V Fokker DR.I are alike.
Should there be one who has both Eduard Fokker EV and Eduard Fokker DR.I there could check if they are the same and may be willing to sell one set of tail planes (There is 2set in DR.I kits).

Best regards
Henning
Title: Re: Comparison of the tail plane on Fokker EV and DR.I
Post by: the great waldo on August 24, 2014, 08:22:14 AM: Hi Henning

What exactly did Eduard give for a reason why they could not help you. If they produce a faulty product they are legally bound to replace it for you. If they can't be bothered with customer support the forum would be a good place to mention it. Cheers

cheers
Andrew

By the way you could probably repair the faulty part with some plasticard and filler
Title: Re: Comparison of the tail plane on Fokker EV and DR.I
Post by: Toldbod on August 24, 2014, 08:52:22 AM: Quote from: the great waldo on August 24, 2014, 08:22:14 AM
Hi Henning

What exactly did Eduard give for a reason why they could not help you. If they produce a faulty product they are legally bound to replace it for you. If they can't be bothered with customer support the forum would be a good place to mention it. Cheers

cheers
Andrew

By the way you could probably repair the faulty part with some plasticard and filler

I got this from Eduard.:
I only received the replacements from the component stock yesterday. Unfortunately, they didnt suply your replacement, becuase its not on stock anymore. So I am sorry, we wont be able to provide a new sprue in this case.

I have asked if they could replace it with the tail from DR.I and got this answer.:
ok, the parts from 8161 shouldnt be a problem, if the kit is still on stock. I will add the request to our system and as soon as I recieve the parts from our component stock, I will let you know about the dispatch of the parcel.
But now there has gone 14 days with out any respons, there fore I was thinking if some one in here could help.

Els I will give it a try with Plastic Card.
Title: Re: Comparison of the tail plane on Fokker EV and DR.I
Post by: Des on August 24, 2014, 09:40:52 AM: Looking at the damaged part it would be quite an easy fix. Just cut out a square section, like on the photo, make a template from the opposite elevator then flip it over and place it under the cut-out section, mark the size then cut, glue into place and when dry sand to shape and thickness.

Des.

(https://lh3.googleusercontent.com/-USNu06-eWEI/U_kZkrtnhuI/AAAAAAAAONQ/-fhtVlctrvY/s614/fokker%2520tail.jpg)
Title: Re: Comparison of the tail plane on Fokker EV and DR.I
Post by: RAGIII on August 24, 2014, 12:42:43 PM: I think fixing is a better choice than using the DR1 tail. Although similar they are not the same exact shape or size.
RAGIII
Title: Re: Comparison of the tail plane on Fokker EV and DR.I
Post by: nmroberto on August 25, 2014, 06:01:38 AM: If all else fails.......I have a tail plane from a Eduard DR I you can have. Just send me a PM with your info.

Robert