forum.ww1aircraftmodels.com

WW1 Aircraft Modeling => Under Construction => Scratch builds => Topic started by: OzkanT on July 14, 2014, 08:54:37 AM

Title: MF-11 1/16
Post by: OzkanT on July 14, 2014, 08:54:37 AM
A new project on workbench :) Farman 11 1/16 scale subject to diorama box for museum. Here some first steps...

Ozkan
Title: Re: MF-11 1/16
Post by: uncletony on July 14, 2014, 09:50:52 AM
Cool!
Title: Re: MF-11 1/16
Post by: Des on July 14, 2014, 10:04:22 AM
I will be watching this build intently, a very interesting subject you have chosen.

Des.
Title: Re: MF-11 1/16
Post by: LindsayT on July 14, 2014, 10:13:00 AM
Very interesting. Looking forward to seeing how this plays out.

Lindsay
Title: Re: MF-11 1/16
Post by: coyotemagic on July 14, 2014, 12:00:18 PM
Oh, my!  This will be fun to watch!
Cheers,
Bud
Title: Re: MF-11 1/16
Post by: lone modeller on July 15, 2014, 02:13:01 AM
An excellent choice of subject and having seen some of your work in the past, this will be one to watch without a doubt.
Title: Re: MF-11 1/16
Post by: Nigel Jackson on July 15, 2014, 08:42:11 AM
Like any others, Ozkan, I'll be fascinated to see how the Farman build progresses.

Best wishes
Nigel
Title: Re: MF-11 1/16
Post by: Alexis on July 15, 2014, 08:57:40 AM
Looking forward on this one . Will be taking notes ...






Terri
Title: Re: MF-11 1/16
Post by: Old Man on July 15, 2014, 09:31:01 AM
Excellent project, Sir!

One of my favorite aeroplanes, will be watching closely.
Title: Re: MF-11 1/16
Post by: OzkanT on July 20, 2014, 09:05:35 AM
Fuselage frame finished. I used 1mm birch strips and laminated on jig. I applied a gloss coat after fine sanding . Then applied diluted burnt umber  oil  color.
Title: Re: MF-11 1/16
Post by: OzkanT on July 20, 2014, 09:18:09 AM
Balsa blocks carved for upper and nose covering moulds. These will be thermoform sytrene sheet. I will heat test sheets tomorrow, I hope it will be fix right.
Title: Re: MF-11 1/16
Post by: OzkanT on July 20, 2014, 09:18:59 AM
Close up view of engine bearer. I made photo-etched brass parts. It will be completed when bolts and nuts arrive as ordered last week.
Title: Re: MF-11 1/16
Post by: Des on July 20, 2014, 10:42:51 AM
Stunning work Ozkan, you are a true craftsman with your building techniques. Which museum is this model going to?

Des.
Title: Re: MF-11 1/16
Post by: OzkanT on July 20, 2014, 06:19:39 PM
Many thanks for kind compliments. Des this is the museum that as I mentioned  lately : http://hisartmuseum.com/
Title: Re: MF-11 1/16
Post by: rhallinger on July 20, 2014, 08:53:43 PM
Beautiful work Ozkan!  This will be a magnificent and interesting model.  Very enjoyable to watch your progress.

Cheers,

Bob
Title: Re: MF-11 1/16
Post by: RAGIII on July 21, 2014, 01:10:11 AM
Absolutely outstanding work! Like the others I am looking forward to following this one!
RAGIII
Title: Re: MF-11 1/16
Post by: lone modeller on July 24, 2014, 07:02:57 AM
Incredible work. As Des has written you are a true craftsman and your work justifiably sits in museums where others can admire it.
Title: Re: MF-11 1/16
Post by: OzkanT on July 25, 2014, 07:41:12 AM
Resin bolts&nuts arrived today and engine bearers completed...
Title: Re: MF-11 1/16
Post by: coyotemagic on July 25, 2014, 07:44:11 AM
Truly remarkable work, Ozkan!  I can't even begin to express how enjoyable it is to follow this build.
Cheers,
Bud
Title: Re: MF-11 1/16
Post by: Alexis on July 25, 2014, 09:46:49 PM
Love the details ! 8)




Terri
Title: Re: MF-11 1/16
Post by: KitRookie37 on September 10, 2014, 01:46:46 PM
Hello guys,
It's great !!
Best regards.
Alain.
Title: Re: MF-11 1/16
Post by: RAGIII on September 11, 2014, 12:11:31 AM
Quote from: coyotemagic on July 25, 2014, 07:44:11 AM
Truly remarkable work, Ozkan!  I can't even begin to express how enjoyable it is to follow this build.
Cheers,
Bud

I agree 100% with my Amigo!
RAGIII
Title: Re: MF-11 1/16
Post by: Mark on September 11, 2014, 01:49:38 AM
Stunning work--there aren't enough superlatives to describe your engine bearers!

Mark G
Title: Re: MF-11 1/16
Post by: Old Man on September 16, 2014, 01:22:22 AM
This is wonderful stuff, Sir.

Reference quality work, for sure.
Title: Re: MF-11 1/16
Post by: OzkanT on October 12, 2014, 01:20:22 AM
Fuselage upper surface vacuformed ,trimmed and replaced
Title: Re: MF-11 1/16
Post by: OzkanT on October 12, 2014, 01:22:55 AM
Bottom and side panels done. But need more trims and details after resin layers set.
Title: Re: MF-11 1/16
Post by: ALBATROS1234 on October 14, 2014, 10:09:08 AM
very nice work thus far ozkan
Title: Re: MF-11 1/16
Post by: RAGIII on October 14, 2014, 10:29:05 AM
Beautiful work thus far! Forgive me if I missed this but what are the sides covered with?
RAGIII
Title: Re: MF-11 1/16
Post by: OzkanT on October 15, 2014, 12:39:12 AM
Fuselage sides covered with paper masking tape and reinforced with resin layers.
Title: Re: MF-11 1/16
Post by: PrzemoL on October 15, 2014, 06:37:48 PM
Very impressive, Ozkan. As always from your desk!
Title: Re: MF-11 1/16
Post by: OzkanT on November 02, 2014, 06:26:15 AM
Started to engine components while others waiting for ordered materials. Engine block is carved and shaped balsa blocks. I made a patern model for cylinder and copied 8 resin pieces   . More details will come  ;)
(https://www.ozkanturker.com/Galeri/farman/034.jpg)
(https://www.ozkanturker.com/Galeri/farman/037.jpg)
(https://www.ozkanturker.com/Galeri/farman/038.jpg)
Title: Re: MF-11 1/16
Post by: ALBATROS1234 on November 02, 2014, 02:38:49 PM
very nice, you do exceptional work ozkan.
Title: Re: MF-11 1/16
Post by: rhallinger on November 03, 2014, 04:03:23 AM
The moldings and castings are first rate!  Very well done.  How did you make the master and the mold for the cylinders?

Regards,

Bob
Title: Re: MF-11 1/16
Post by: OzkanT on November 03, 2014, 06:10:54 AM
 Bob  cylinder formed on  Dremel  using patern block then cut to two half because  fins are very thin and not easy to pull from silicone mould without damage. So I had to make silicon mould as left/right part. Bottom part of cylinder I  used a plastic pipe and round some masking tape to get right size. One cylinder  has six seperate parts and moulds. I am still working on patern for cylinder head and valve section.
Title: Re: MF-11 1/16
Post by: Old Man on November 03, 2014, 04:18:41 PM
Great work, Sir!

This really is a wonderful project.
Title: Re: MF-11 1/16
Post by: Ernie on November 03, 2014, 07:50:48 PM
Really stunning work!  A great build to follow, Ozkan.
Looking forward to the next updates.

Cheers,
Ernie :)
Title: Re: MF-11 1/16
Post by: coyotemagic on November 04, 2014, 03:17:27 AM
That engine is spectacular, Ozkan!
Cheers,
Bud
Title: Re: MF-11 1/16
Post by: Michael Scarborough on November 04, 2014, 04:01:51 AM
Very exciting, Özkan! Inspirational, indeed!

Cheers from NYC,
Michael

PS Istanbul! Wow...we really are an international bunch, aren't we!
Title: Re: MF-11 1/16
Post by: Alexis on November 04, 2014, 10:18:40 AM
Quote from: coyotemagic on November 04, 2014, 03:17:27 AM
That engine is spectacular, Ozkan!
Cheers,
Bud


Will second this  8)



Terri
Title: Re: MF-11 1/16
Post by: RAGIII on November 04, 2014, 01:53:41 PM
Quote from: Terri on November 04, 2014, 10:18:40 AM
Quote from: coyotemagic on November 04, 2014, 03:17:27 AM
That engine is spectacular, Ozkan!
Cheers,
Bud


Will second this  8)



Terri

Add me to the List!
RAGIII
Title: Re: MF-11 1/16
Post by: lone modeller on November 05, 2014, 08:12:01 AM
Stunning work. The engine is simply remarkable with an amazing amount of detail.
Title: Re: MF-11 1/16
Post by: radio on November 05, 2014, 08:51:38 AM
Fantastic work.
Martin
Title: Re: MF-11 1/16
Post by: petrov27 on November 05, 2014, 09:14:59 AM
Really exceptional scratch building going on here - thank you for sharing with us!
Title: Re: MF-11 1/16
Post by: xan on December 21, 2014, 09:02:05 AM
Woah! "magnifique"!

Xan
Title: Re: MF-11 1/16
Post by: Des on December 21, 2014, 09:10:35 AM
It's fascinating watching the different tecniques you are using to achieve your goals, your scratchbuilding skills are second to none.

Des.
Title: Re: MF-11 1/16
Post by: OzkanT on March 23, 2015, 04:21:26 AM
well almost done ! Progres photos should be prepare but I need time to complete one more project for sheduled occation  ;)
Title: Re: MF-11 1/16
Post by: rhallinger on March 23, 2015, 10:34:10 PM
Gorgeous Ozkan!  Fantastic modeling. ;D.

Cheers,

Bob
Title: Re: MF-11 1/16
Post by: PrzemoL on March 23, 2015, 10:48:03 PM
Breathtaking. I am looking forward to the final gallery.
Title: Re: MF-11 1/16
Post by: uncletony on March 23, 2015, 11:09:11 PM
Fantastic!
Title: Re: MF-11 1/16
Post by: coyotemagic on March 24, 2015, 02:05:37 AM
Quote from: PrzemoL on March 23, 2015, 10:48:03 PM
Breathtaking. I am looking forward to the final gallery.
My feelings, exactly, Ozkan!
Cheers,
Bud
Title: Re: MF-11 1/16
Post by: KitRookie37 on March 24, 2015, 03:29:07 PM
Hello gentlemen,
I agree, more big pictures.  ;)
Best regards.
Alain.
Title: Re: MF-11 1/16
Post by: Des on March 24, 2015, 06:51:53 PM
A stunning piece of scratch building Ozkan, looking forward to seeing the completed model photo gallery.

Des.
Title: Re: MF-11 1/16
Post by: lone modeller on March 25, 2015, 03:28:26 AM
That is a fantastic model - please post more photos of this splendid piece of work.
Title: Re: MF-11 1/16
Post by: UFAG on May 09, 2015, 08:09:55 AM
eh..is it me..or the system, I am missing out on the photos on page 3....
Title: Re: MF-11 1/16
Post by: KiwiZac on May 14, 2015, 06:55:59 AM
That looks wonderful, a terrific job.

UFAG - I think it's the system as I can't see them either.
Title: Re: MF-11 1/16
Post by: UFAG on May 27, 2015, 08:18:15 AM
Magnificent Ozkan...!!
Title: Re: MF-11 1/16
Post by: LukasTheLight on June 15, 2015, 09:03:27 PM
I missed this somehow... But WOW!!! Brilliant work!!!

Cheerio
Lukas
Title: Re: MF-11 1/16
Post by: OzkanT on July 16, 2015, 07:45:25 AM
Full article placed in website : http://www.ozkanturker.com/Galeri/farman/index.htm (http://www.ozkanturker.com/Galeri/farman/index.htm)

Thanks for your kind comments  :)

Happy modelling

Ozkan
Title: Re: MF-11 1/16
Post by: Des on July 16, 2015, 08:05:17 AM
Thank you Ozkan for the link to your build log, you did an incredible job with this model and the results are amazing.

Des.
Title: Re: MF-11 1/16
Post by: dr 1 ace on July 17, 2015, 03:55:39 AM
Quote from: coyotemagic on March 24, 2015, 02:05:37 AM
Quote from: PrzemoL on March 23, 2015, 10:48:03 PM
Breathtaking. I am looking forward to the final gallery.
My feelings, exactly, Ozkan!
Cheers,
Bud

Add another one to the above !

Ed
Title: Re: MF-11 1/16
Post by: lone modeller on July 17, 2015, 07:53:02 AM
Quote from: dr 1 ace on July 17, 2015, 03:55:39 AM
Quote from: coyotemagic on March 24, 2015, 02:05:37 AM
Quote from: PrzemoL on March 23, 2015, 10:48:03 PM
Breathtaking. I am looking forward to the final gallery.
My feelings, exactly, Ozkan!
Cheers,
Bud

Add another one to the above !

Ed

And another! Simply wonderful modelling.

Stephen.
Title: Re: MF-11 1/16
Post by: pietro on July 27, 2015, 05:07:10 AM
Ozkan, I like the shot of the wood chips, just carve away everything that does not look like a fuselage. This is one I'll be watching. pietro