forum.ww1aircraftmodels.com
WW1 Aircraft Modeling => Under Construction => Topic started by: KrzysiekK on December 18, 2013, 06:37:00 AM
-
Hello everyone,
It seems that it would be a short thread, because the amount of plastic parts is rather poor but this is only my first assumption.
Some discrepancies between the possible real outlook and the manufactures outcome are so far as follows:
- lack of wood floor?? Decided to get rid of it
- lack of throttle?? Decided not to assemble
I started to adapt the chair to possible look. I do not have any PE parts, so I had to slim down plastic, drilled holes, prepared seat belts from notebooks covers used 30 years ago in primary schools and here it is:
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_3.jpg)
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_4.jpg)
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_5.jpg)
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_6.jpg)
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_7.jpg)
-
The Morane sounds like an interesting build, Krzysiek. I don't
know if it is my computer, but I am unable to see any photos.
I look forward to following your project.
Cheers,
Ernie :)
-
The Morane sounds like an interesting build, Krzysiek. I don't
know if it is my computer, but I am unable to see any photos.
I look forward to following your project.
Cheers,
Ernie :)
Same here!
RAGIII
-
The Morane sounds like an interesting build, Krzysiek. I don't
know if it is my computer, but I am unable to see any photos.
I look forward to following your project.
Cheers,
Ernie :)
Same here!
RAGIII
ja też. I sure would like to see it, though!
Cheers,
Bud
(Next Day):
Ah! There they are! Very nice start, K. I'm looking forward to watching this one come together.
Cheers,
Bud
-
No pictures for me either. :(
-
It`s a nice start Krzysiek! The seat looks really good! I would use a drop of some clear gloss enamel for the instrument faces. I use the clear nail enamel - it`s rather thick which helps to create a desired layer. Should you want to use it be absolutely sure that the decal is dry and give it a protective coat of some clear acrylic paint - I destroyed one of the decals because the enamel dissolved it.
Keep up the good work on MS N.
-
For instrument "glass", you could use Future(Kleer) acrylic floor polish or
Microscale Krystal Kleer. I have used both and they both work very well.
Cheers,
Ernie :)
-
Sorry for lack of pics..server host failure, now should be ok
Accepted by you, so going deeper..
Let’s take the wings on the desk..
- 1st layer on bottom: H89 with little drops of H57
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_8.jpg)
- masking the frames
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_9.jpg)
- 2nd layer on bottom: same mixture with few drops of white.
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_10.jpg)
- used same mixture for upper framing
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_11.jpg)
- masking the upper frames
- and final Vallejo 71028 will be applied on both sides. Hope it will be worth of doing. will see
regards
K
-
It will most certainly pay off! I`m anxious to see the result!
Keep up the good work mate!
-
Wow! Now that I can see the photos, KrzysiekK, it's evident how
talented you are. Very nice work. I will enjoy seeing the rest of your project.
Nicely done. :D
Cheers,
Ernie :)
-
Now that the pictures are visible I must say you are off to an Impressive Start! Keep up the great work and I am Looking forward to your progress!
RAGIII
-
Thanks for support ;D
You were right it was worth of doing.
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_12.jpg)
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_121.jpg)
Going further lets take fuselage into attention. The red color will overweight this thread, so red front was done.
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_14.jpg)
and later on I have looked at the decals and said to myself: those red stripes does not work.So again..
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_13.jpg)
-
The wing turned out beautiful, well done, and I like the shade of red you have used on the front of the plane, looking forward to more updates.
Des.
-
I like it very much!! Are you going to chip the cowling and the spinner?
-
Very nice work, bravo :D
-
Very nicely done Krzysiek, your interior is fantastic and painting as well.
Kind regards
Patrick
-
Hi,
I like it very much!! Are you going to chip the cowling and the spinner?
have not intended to do so..have you done it in yours MS?
BTW. prop blades were black painted/lacquered? Any suggestions?
Till now I have implemented some decals with SET&SOL help I found that lost approx 1 mm in blue on the fuselage..so..again little tiny work must be done.
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_18.jpg)
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_19.jpg)
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_20.jpg)
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_21.jpg)
Next step: the engine. I am going to enhance eduard part a little bit with “non commercial items” i.e. “take sth which is close at hand ;D, so I am in the middle of sth like that:
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_22.jpg)
-
Lovely work Kryzsiek. I'm looking forward to seeing how this one progresses.
Best wishes
Nigel
-
Your painting and decaling are absolutely gorgeous! This is going to be a Stunning Model When Done! Your Engine is looking great. I Look forward to your progress!
RAGIII
-
Your painting and decaling are absolutely gorgeous! This is going to be a Stunning Model When Done! Your Engine is looking great. I Look forward to your progress!
RAGIII
I completely agree with Rick. Krzysiek, you are doing an excellent job.
Cheers,
Ernie :)
-
Hi Krzysiek,
Wonderful painting, decal setting and lovely engine. Wel done! Looking forward to the next update.
Kind regards
Patrick
-
Very nice paint work. Looking awesome.
Cheers
-
Thank you all for support!
I was thinking what Filip said and decided not to chip cowling. Spinner? I have not decided yet.. :(
ok. Engine is ready. It will rotate..I hope so :P
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_23.jpg)
Now working on the fuselage and tail
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_24.jpg)
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_25.jpg)
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_26.jpg)
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_27.jpg)
-
Excellent update! Your brass pipes are great and the red trim and decaling of the tail surfaces and fuselage are terrific!
Keep the pics coming please!!
RAGIII
-
Totally agree with Rick Krzysiek, your painting is so nice and neat. Wonderful!
Kind regards
Patrick
-
I have to add my voice to the chorus, Krzysiek. The engine looks great,
especially in place. Also beautiful paint. Good work!
Cheers,
Ernie :)
-
Excellent paint and decal work, K! Looking forward to the next update.
Cheers,
Bud
-
The map in the cockpit was to be the added value but I am not satisfied out of the result
Nevertheless implemented.
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_28.jpg)
Second thought was to emphasize the longitudinal ribs of wings as seen in Windsock pictures so used soft pencil and results are promising
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_30.jpg)
(http://kosior.cp.win.pl/krzysiek/warsztat/MStN/IS_MStN_29.jpg)
-
That's really looking good, Krzysiek. It's a very colourful scheme and you've done it very well.
Good stuff!.
Dal.