forum.ww1aircraftmodels.com

The Hobby Showroom => Aircraft in Pixels / Flugzeugwerke => Topic started by: uncletony on January 01, 2025, 02:10:32 AM

Title: New stuff: Flugzeugheber & LVG C.VI Radiator
Post by: uncletony on January 01, 2025, 02:10:32 AM

A few new 1/32 WWI bits are now available from AiP:

Flugzeugheber

(https://i.imgur.com/a8huOs3l.jpg)

These LSK airplane jacks are seen in many period photos -- for example, check the WNW Albatros D.V "Bavarians" decals page with photos of Kissenberth's mount (http://www.wingnutwings.com/ww/productdetail?productid=3015&cat=1).   They were almost certainly made at the unit level, and considerable variation can be observed, but they all worked on the same simple principle.

(https://i.imgur.com/MpRzokIl.jpg)

The set contains parts for two jacks, and assembled with .7mm brass tubing they are completely functional. Available here (https://www.aircraftinpixels.com/shop/p/wwi-aircraft-jacks).

LVG C.VI Radiator and Shutters with Replacement Center Section

(https://i.imgur.com/vaSBiphl.jpg)

Years in the making! Eight parts to super-detail the radiator of your WNW LVG C.VI. Yes, you can see through the fins per the original. The underside of the radiator is corrected -- WNW's rendition has many errors including the shutters facing backwards. Requires shortening the the upper wing tabs.

(https://i.imgur.com/WoQcTi5l.jpg)

8 parts shipped on 4 rafts. Available here (https://www.aircraftinpixels.com/shop/p/132-lvg-cvi-radiator).

(https://i.imgur.com/uBkXqcAl.jpg)

Title: Re: New stuff: Flugzeugheber & LVG C.VI Radiator
Post by: NigelR on January 01, 2025, 08:14:25 PM

Stunning work!

Title: Re: New stuff: Flugzeugheber & LVG C.VI Radiator
Post by: Umlaufmotor on January 10, 2025, 07:38:23 AM

I know the 3D-parts from "Flugzeugwerke".
I am always enthusiastic about these excellently detailed and finely printed parts.
Excellent smooth surface.
I'm really looking forward to holding the parts in my hand - especially the LVG Wing Radiator and Flugzeugheber.

Servus
Bertl

Title: Re: New stuff: Flugzeugheber & LVG C.VI Radiator
Post by: uncletony on January 10, 2025, 11:12:12 AM

Quote from: Umlaufmotor on January 10, 2025, 07:38:23 AM

I know the 3D-parts from "Flugzeugwerke".
I am always enthusiastic about these excellently detailed and finely printed parts.
Excellent smooth surface.
I'm really looking forward to holding the parts in my hand - especially the LVG Wing Radiator and Flugzeugheber.

Servus
Bertl

Should be there very soon! Let us know what you think when they arrive.