I decided to get the Aviattic bespoke decals rather than make up my own from their streaked camouflage decals.
I tried applying the starboard decal without removing the forward outlet with dire results. "Repairs" effected but a mistake I won't make again. I will try and tidy up the repair before the end.
So I cut the port one off, applied the decal and then reattached the outlet
I did attach the top decal but my initial fitting of the side decals left a gap so I've had to make up a new one from the streaked camouflage set I already had from Aviattic. Still not correct but most will be hidden by the triangle decals. In future builds when using these bespoke decals I'll make sure there is no gap. One way will be sanding away about a .5 mm from the fuselage halves to ensure the top decal is big to cover with no gaps.
