forum.ww1aircraftmodels.com
WW1 Aircraft Modeling => Under Construction => Topic started by: Adam on November 26, 2014, 11:50:41 PM
-
For quite some time I do this model, but most of the time I spent with the Nieuport 17.
To the model I bought extras such as shown in the pictures.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02667_zps8803b4e9.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02675_zps0c2b9b14.jpg)
On the fuselage have a plan to paint a lozenge using MONTEX masks, so that it shone through the blue like a cross.
The instructions does not have the numbers paint colors in the internet I found only Methuen numbers. Maybe someone know numbers paints e.g FS.., Humbrol...?
As always, start with the cockpit.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02585_zpse8f549e6.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02669_zps3c33b0c8.jpg)
Here is woodgrain painting test using Edwuards masks for wood. I done it together with Nieuport.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02681_zpsfc3ea541.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02683_zps1faa71b0.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02670_zpsa5ef1315.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02671_zps56670b44.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02672_zps1ef5c6f6.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02687_zpsa6500f41.jpg)
Small progress.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02824_zpse7040238.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02825_zps4e0ba7b7.jpg)
I made rigging of the cockpit frames.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02826_zpsec481575.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02827_zps7103e265.jpg)
Fuel tank.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02831_zps60352765.jpg)
Fuel manual pomp
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02835_zps28ab6545.jpg)
I painted the red strips on the cylinders of the engine.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03426_zps0322e4e8.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03439_zps30e319b9.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03453_zpsecb7e5d3.jpg)
Pilot's seat, got the belts HGW.
The rear wall of the cockpit got Lozenge.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03433_zps6418afed.jpg)
Collective photo of all what I did yesterday.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03451_zps99761dcb.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03454_zps66ed794f.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03455_zpsf2b29e1d.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03457_zps4d825d9b.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03458_zps273ada05.jpg)
To be continued. ;D
Adam.
-
Brilliant start, Adam. You've made excellent progress and everything looks magnificent. I like the effect of the wood grain mask.
Cheers,
Bud
-
Nice start Adam! Why not join the group build? You are already ahead of me :)
-
Looks like you're off to a great start here.
-
very nice I have hate to see more
-
A superb beginning Adam.
Martin
-
Hello to all,
A very good beginning, you're well prepared !! ;)
Best regards.
Alain.
-
You are off to a flying start on this one Adam and what you have done so far looks very good, well done.
Des.
-
I have to agree with all of the others, OUTSTANDING start. Your wood work and detail painting are superb!
RAGIII
-
great start!
-
You are off to a super start, Adam! Excellent work! :D
Cheers,
Ernie :)
-
Friends, thank you for your kind words, they add me strength to struggle with this model. :)
Bo, maybe you're right to move this topic to the group build, I see that now is discussion to extend the duration of the project, but I think you're done your earlier Fokker. ;)
How can I join to GB?
Adam.
-
A long long time ago, work on this model have been suspended.
The reason was to finish the Nieuport 17
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Nieuport%2017/mDSC05438_zps1chynwwx.jpg)
and the AC / NC-123K Black Spot from the Vietnam War.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/NC-AC123K-Black%20Spot%20i%20Cobra/mDSC08083_zpsssjcycxn.jpg)
Now it's time to finish this model.
Because the I spend a lot of time on business trips that I had little time to work on this model and still less time for the presentation of what I did, I'm sorry.
Now, a short report from what I did.
flight instrument panel looks like that.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08145_zps5qdvaxaf.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08146_zps8vr0v7kn.jpg)
Compass.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08151_zpscdofimhs.jpg)
The cockpit and the rest mounted.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08155_zpszbtbyqhk.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08156_zps3tp2pvho.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08157_zpsoighbzkr.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08164_zpsn1y11wgw.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08167_zpsmnepqxi2.jpg)
To the test to see how it looks with the engine.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08161_zpsmol0ud5x.jpg)
Now time for the engine, will be used additives fromTaurus.
I think that nothing will slow down work on this model.
Adam.
-
Great start Adam, that cockpit is quite spectacular. Looks like a real winner in the making!Cheers,
Lance
-
Lovely work with the cockpit and engine Adam.
Des.
-
Adam,
Outstanding engine and cockpit my friend.
Highest Regards,
Gregory Jouette
-
Adam,
Great to see you back on this one! Your cockpit looks outstanding as does the engine!
RAGIII
-
Adam,
Great to see you back on this one! Your cockpit looks outstanding as does the engine!
RAGIII
Another ditto !!
Ed
-
your build is terrific
I take a ticket to follow this ;)
-
Great work Adam.
Cheers
Martin
-
Thank you my friends for the good word. :)
I decided to make small upgrade of the engine. ;)
To set the levers of valves had to be cut timing gear. :o
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08191_zpscxjztl2n.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08192_zpsn3d0eone.jpg)
Then I made holes for the axles .
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08194_zpso7crymci.jpg)
Then I made holes in the levers.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08197_zpsd4uhceqm.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08204_zpslksubh9u.jpg)
Timing system was reassembled again. ;D
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC08208_zps2o9nfyqj.jpg)
The levers are ready for installation.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/m20160215_204301_zpssxm3ojr4.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/m20160215_212449_zps9rhstzrj.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/m20160216_212459_zpsowsm5m17.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/m20160217_193000_zpsceutzdrw.jpg)
Whole timing gear has been mounted to the engine.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02753_zpsrlt0rt5a.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02756_zpszhvvjbet.jpg)
Now they have been installed valve springs.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02758_zpskpnducjk.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02759_zpsphvjerhm.jpg)
Now is the time for the spark plugs.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02768_zpscwj2akfw.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02770_zpsnaqwt330.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02772_zpscbftolop.jpg)
Then came time for the installation of wiring.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02774_zps5nusbedh.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02784_zpsm5f0vv0s.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02788_zpscel5e7dj.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02797_zpsq6pnp9v4.jpg)
Above you can see small tragedy, :'( the two spark plugs have chosen the freedom. :-X
The engine is almost ready.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02801_zpszy6vzii3.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02803_zpstc0flxbi.jpg)
That nothing more is not lost, I did such a case. The inspiration was this image taken from Wngnuth.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDaimler-Mercedes%20D.III%20160hp%20early%20with%20air%20pump%20E48%20at%20rear%200978-040_zpsp0qjci6o.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC02809_zpsh4a8kb8i.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mMercedes%20D_edytowany-3_zpsfldrcqjn.jpg)
And now I can safely proceed to further work on my model. ;D
Adam.
-
:o Bloody marvelous, Adam!
Cheers,
Bud
-
what a phantastic build, Adam, congratulations! I especially like the engine.
-
:o Bloody marvelous, Adam!
Cheers,
Bud
I'll double that comment! Very impressive work on the engine, Adam, you have a really spectacular Build going here.
Cheers,
Lance
-
Exellent work to the engine Adam.
Cheers
Martin
-
very good work
this engine is fabulous
-
Hi!
Excellent!
Ciao
iwik
-
A very impressive looking engine Adam, you have done a superb job.
Des.
-
:o Bloody marvelous, Adam!
Cheers,
Bud
Plus one Amigo!
RAGIII
-
Adam, may I ask you what kind of red wiring you used for your engine that still makes me envious every time I look at it?
Best wishes
Borsos
-
Very nice Adam!
-
I really like what you have done so far, Adam! Looking forward to more,
Chris
-
The engine is just wonderful, Adam. Looking forward
to the next updates, my friend.
Cheers,
Ernie :)
-
Very nice work on that engine, Adam. I like how you tackled the ignition wires and also the rocker arms - beautiful.
Cheers,
Gary
-
Adam, may I ask you what kind of red wiring you used for your engine that still makes me envious every time I look at it?
Best wishes
Borsos
This is a cable from the electrical coil, when connected to a spark plug was painted.
I thank my friends for your opinions. ;D
And now the relation with what I did.
Preparation for shading wings.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03127_zpsyfuksaoa.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03129_zpsu9avx8bh.jpg)
Encouraged good your opinions I bought decals AVIATTIC.
They look great but are very demanding in applying.
I recommend you read the manual before gluing and not during the gluing, as I did.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03132_zps3belmztf.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03135_zps7iyvhzxp.jpg)
And now result.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03171_zpsfatpazgf.jpg)
All the plates were painted silver to make them scratched later.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03184_zpsjnkmih4v.jpg)
Now it's time for the exhaust pipe. So far I've done models with rotary engines but they have not have such pipes.
Someone here gave his method of painting exhaust pipes, but I can't remember who, sorry. :-[
I remembered a little of this, and I present what I done.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03198_zpst3y0hdid.jpg)
At the beginning I did a test on the pipe from the right.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03193_zpsi38odssh.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03202_zpszm33wae2.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03203_zpsp4oyuhhq.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03205_zpszhj9t0u6.jpg)
The exhaust pipe connected to the engine looks so.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03207_zpsge9alrlx.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03208_zpsh1stnemg.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03209_zps5s8uoiqg.jpg)
To be continued. ;D
Adam.
-
Fantastic engine and nice shading Adam.
Cheers
Martin
-
Beautiful engine and your shading is terrific! Well Done!!
RAGIII
-
Adam,
Great progress, the engine is some very nice work, the oil staining and "dirtying" are superbly done. Looking forward to seeing more progress on this beauty!
Cheers,
Lance
-
very good job
-
Fantastic built! I'm still very impressed by this engine in particular.
-
The engine is a gorgeous model on it's own, Adam. Looking
forward to the next updates, my friend. By the way, you
did a terrific job of the engine's supporting "box"!
Cheers,
Ernie :)
-
It is moving along nicely.
Ed
-
Thank you for your kind words, my friends.
A lot of time has passed since my last post.
Many business travel slowed work on this model.
Lack of time did not allow a mine to show pictures of the construction of the model, I'm very sorry. :'(
The fuselage is painted and decals are affixed.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03322_zpszsd2hne8.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03323_zpszdrhtje1.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03324_zpsni15dg7t.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03328_zpscc3bg9xk.jpg)
The rudder is ready.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03331_zpsnxm6oqfn.jpg)
Now it's time to complete the fuselage.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03332_zpsar9ltffd.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC03415_zps5lv8mfhv.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04450_zpssi994bka.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04451_zpseddjxhxm.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04453_zpsrmi9uwhr.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04454_zpsbqu5vig3.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04455_zpskmqakeaf.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04459_zpsgomw5nbz.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04460_zpsdj6rktus.jpg)
Now my Fokker got the engine and radiator. Pictures will be soon.
My Polish colleagues asked me not to hide the engine behind covers.
Therefore, I decided to make a small diorama, I will be doing it the first time. :o
I bought from my colleague, known here set Aviattic's WW1 German crew refueling and fuel WW1 German cart.
The project of it I have in my mind. ;) but I'll be asking for yours help also.
Adam.
-
Adam, congratulations beautiful Fokker build. to keep sb's fingers crossed, a diorama. Best wishes. Łukasz
-
Good to see construction has continued on the Fokker, Adam. :D
Beautiful job of the painting of the fuselage and the decaling.
Excellent progress, my friend!
Cheers,
Ernie :)
-
Adam,
The shading and over painting of the fuselage is excellent; you've really produced a realistic effect and the decaling fits in perfectly. Not an easy colour scheme to replicate but you've done it beautifully, nice work and I'm looking forward to seeing the final results!
Cheers,
Lance
-
Beautiful Paint work Adam. The overspray has turned out perfectly! One of my favorite schemes for a DVII!
RAGIII
-
Your opinions motivate me to continue to work, thank you very much.
Time to make the stings for my model. As usual, it is already proven additions from the MASTERS.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04667_zpspubab4h7.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04678_zpsxmza6q1c.jpg)
Machine guns are ready and mounted on the model, I really like them.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04688_zpshftc8ce8.jpg)
Landing gear installed without glue, to check that everything fits.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04689_zpswqhxdp5e.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04690_zpsshwlafcr.jpg)
The next step is the completion and installation of the upper wings.
Adam.
-
A real stunner! It looks better with each update!
RAGIII
-
Really a wonderful Fokker! And these Machine Guns are looking great, too!
Can't wait to see it finished!
Borsos
-
I look and admire. Great painting. Unusual Wawel Dragon ;) . Great Spandau, Adam greetings from the Polish.
fingers crossed (trzymam kciuki). Łukasz
-
Man that's beautiful, thanks for posting!
Cheers,
Gary
-
Excellent progress, Adam!
Cheers,
Ernie )
-
Awesome work, Adam! Love those guns!
Cheers,
Bud
-
Beautiful work on the machine guns Adam.
Des.
-
Great, my favoured paint scheme. Well done, Sir!
Manni
-
This is a fantastic build - really loving the colours!
-
Another ditto ! to all the above.
Ed
-
Hey Adam!
I don't know how I missed this post till now!!
Really outstanding! every aspect of yor build is first class!
Really well done!
ciao
edo
-
A great build - good photos as well!
The more I see of these Fokker D.VII builds, the lines of the aircraft & in particular the often colourful markings - the more I regret that the kits are out of production. I'll no doubt be thinking the same about the Albatross D.Va soon as well :(
Regards
Russell
-
I`ve commented your progress somewhere else but I just wanted to say - spectacular!
-
Adam
Outstanding details on her Mercedes my friend. Truly impressive!
Highest Regards
Gregory Jouette
-
My dear friends, RAGIII, Borsos, Łukasz, Gary, Ernie, coyotemagic, Des, Manni, FarEast, Ed, Edo, Russell, xmald and Gregory ;D thank you very much for your kind words.
My Fokker is almost finished, I have to make a few details.
Magazine cartridges for flare and flare gun itself.
I do not know how flare gun was mounted to the side of the fuselage, on the pictures I can't see this exactly, maybe someone of you help.
Now the last pictures of my Fokker, because it flew in the autumn of 1918 so it is muddy, maybe a little too much.
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04721_zpsreol7mr7.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04732_zpsu4lyx688.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04737_zpsswkid2cv.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04742_zps947vxarv.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04743_zps62woelce.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04746_zpsjdzj5zvc.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04747_zpst0vc8sfp.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04749_zpshh3eme2m.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04751_zpsezdp1ejm.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04752_zpss7wsnvnv.jpg)
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04753_zpsucmcejnv.jpg)
Yet I noticed that I should improve of the propeller painting , but here I am waiting for the inspiration creative.
Now I can start diorama.
Des whether I have to start a new thread with the diorama?
As the Chinese proverb says, to take a long march must take the first step.
And this is my first step in making dioramas, funnel. ;D
(http://i682.photobucket.com/albums/vv186/AlbatrosDIII/Fokker%20D%20VII%20OAW/mDSC04761_zpswhal6d1m.jpg)
Adam.
-
An absolutely beautiful job on this one! The painting is outstanding! Nice work on that funnel!
RAGIII
-
An absolutely beautiful job on this one! The paining is outstanding! Nice work on that funnel!
RAGIII
Gotta agree with my Amigo on this, Adam! Stunning!
Cheers,
Bud
-
An absolutely beautiful job on this one! The paining is outstanding! Nice work on that funnel!
RAGIII
Gotta agree with my Amigo on this, Adam! Stunning!
Cheers,
Bud
I couldn't say it better! Great job of the funnel, Adam!
Cheers,
Ernie :)
-
Great ,Adam.
Top job.
My favorit scheme.
When I see the funnel, then I expect an absolutely high-end dio. ;)
Manni
-
Adam, that's beautiful, Leusch with his dragon is one of my favourite subjects, I'll make it in 48th and by no way will be able to achieve this degree of mastery!
Ciao
Antonio
-
A beautiful job on your D.VII Adam. To answer your question, yes, you do have to start a new topic for your diorama.
Des.