Hi all,
I've started on the pre-rigging, which for this model is all on the lower wings and fuselage.
This is mainly because of the tight proximately of the anchor points at the wing roots for the twin flying wires.
All done using, for a change, ‘Maxima’ Chameleon mono-filament 0.12 mm diameter.
Turnbuckles are the usual 'GasPatch' 1:48th scale metal, Type C.
The tubing is 0.5 mm diameter that was pre-blackened using 'Blacken-It' solution.
I still have the rudder, undercarriage and under fuselage rigging to do before the upper wing can be fitted,
Mike